Basic storage information of in-mould labels

1
Basic Storage Information Of In-Mould Labels
In-mould labeling is among the most contemporary
additions to the product labeling
technique. There is a unique thing about the
in-mould label while making these labels, the
label manufacturers do not use any paper,
plastic, or OVC sheet. This is because these in-
mould labels are manufactured in such a technique
that they remain fused with the product container.
2

• However, even though it might sound that the
  entire process is very convenient, it is not so.
  Specializations are required for making a good
  quality in-mould label. Equal preparedness is
  required during the storage of these in-mould
  labels.
• Here are some storage information. Check them
  out!
• Consider the climate
• The climate of the place where in-mould label is
  supposed to be stored bears major significance.
• Certain climatic factors deteriorate in-mould
  label during storage. This is irrespective of the
  chemical composition of the top coating of these
  labels, or the type of the film that has been
  used for the label, or the packaging design.
• For instance, if these labels are stored in a hot
  and extremely humid place then they may generate
  static electricity.
• Therefore, the humidity of the area where the
  storage of in-mould labels would take place bears
  special significance.
• Packing in cartons
• It is highly recommended that these labels must
  be packed inside cardboard cartoons during their
  storage. These labels should be assorted in the
  manner of banded bundles before inserting them
  inside these cartoons.
• Another additional recommendation here is that
  the bundled labels should be kept in an
  upside-down manner.
• The cardboard boxes must be stacked in the form
  of a vertical manner when the bundled labels have
  been inserted inside them and sealed.
• Temperature requirements
• Specifications are also given by reputed
  in-moulds labels manufacturers regarding the
  temperature at which these labels have to be
  stored.
• The expected temperature range must be somewhere
  around 20 degrees Celsius.

3
However, if this temperature range exceeds
massively then the in-mould labels might
melt. Similarly, if the temperature falls down
below this range then the colour pigments in
these labels might get affected. Eventually, the
label will get discoloured. Here, a piece of
special advice for you is that you have to be
very cautious about the environmental
recommendations when you have to store these
labels for a longer duration without
deteriorating it at all. Aggressive heat is a
bane Never keep the in-mould labels in close
proximity to open flames, heat or direct heat of
the sun. If you do so, the labels will catch fire
and melt. Introduction In-mould labels (IML) are
a popular choice for decorating plastic products,
offering durability and high-quality graphics.
However, to ensure these labels retain their
quality and performance, proper storage is
essential. This blog provides basic storage
information for in-mould labels, including
recommended conditions and handling tips to
maintain their integrity. What Are In-Mould
Labels? In-mould labels are labels that are
inserted into a mould during the manufacturing
process of plastic containers. As the plastic is
injected or blown into the mould, the label bonds
to the container, becoming an integral part of
the product. This process results in a seamless,
durable decoration that is resistant to wear and
tear. In-mould labels are commonly used in the
packaging of food, beverages, and household
products.
4

• Importance of Proper Storage
• Proper storage of in-mould labels is crucial for
  maintaining their quality and functionality.
  Incorrect storage can lead to issues such as
  warping, color fading, and adhesive failure,
  compromising the label's appearance and
  performance. By following recommended storage
  guidelines, you can ensure that your in-mould
  labels remain in optimal condition until they are
  ready for use.
• Recommended Storage Conditions
• Temperature and Humidity Store in-mould labels
  in a controlled environment with a temperature
  range of 15C to 25C (59F to 77F) and a
  relative humidity of 40 to 60. Avoid exposing
  labels to extreme temperatures or humidity
  levels, as these can cause the labels to warp or
  become brittle.
• Light Exposure Keep labels away from direct
  sunlight and fluorescent lighting. Prolonged
  exposure to light can cause the colors to fade
  and degrade the label material.
• Storage Position Store labels flat and avoid
  stacking heavy objects on top of them. This helps
  prevent warping and bending. Use appropriate
  storage containers or shelves to maintain the
  labels' shape and integrity.
• Clean Environment Ensure that the storage area
  is clean and free from dust, dirt, and other
  contaminants. Contaminants can adhere to the
  labels and affect their adhesive properties.
• Handling and Transportation Tips
• Gentle Handling Handle labels with clean, dry
  hands or wear gloves to avoid transferring oils
  and dirt. Always support the labels to prevent
  bending or creasing.
• Proper Packaging When transporting in-mould
  labels, use protective packaging to shield them
  from physical damage and environmental factors.
  Use sturdy boxes and cushioning materials to keep
  the labels secure.

5
Avoid Moisture Keep labels dry during
transportation. Moisture can cause the labels to
stick together or become damaged. Common
Storage Mistakes to Avoid Stacking Heavy Objects
Avoid placing heavy items on top of stored
labels, as this can cause deformation and
damage. Exposure to Extreme Conditions Do not
store labels in areas prone to extreme
temperatures or high humidity, such as near
heating vents or in basements. Ignoring Expiry
Dates Pay attention to the labels' shelf life
and use them within the recommended period.
Expired labels may not perform as
expected. Conclusion Proper storage of in-mould
labels is essential to maintain their quality and
functionality. By following the recommended
storage conditions and handling tips, you can
ensure that your labels remain in excellent
condition until they are ready to be used. Avoid
common storage mistakes and prioritize a clean,
controlled environment to preserve the integrity
of your in-mould labels. GET IN TOUCH WITH
US Winners Labels CB - 70, SALT LAKE CITY,
KOLKATA - 700 064 CONTACT NO 91 9830087119 /
9831070140 / 9831016222 EMAIL INFO_at_WINNERSLABELS.
COM WEBSITE https//www.winnerslabels.com/ Tags
Number Plate Hot Stamping Foil, Hot Stamping Foil
Holographic license plate, Hot Stamping Foil
License Plate, Hot Stamping Foils for Car License
Plates, Number Plate Hot Stamping Foil, Hot
Stamping Foils for Number Plate, Indian number
plate hot stamping foil, Hot Stamping Foil For
License Number Plate, hot Stamping Foil for car
number plate, hot Stamping Foil for Registration
Car Number Plates, Hot Stamping Foil for Number
Plate, Vehicle number plate hot stamping foils