High-Quality Motorized Skylight Shades in New York City

1
Installing Motorized Skylight Shades New York
City Step-by-Step Guide
One of the easiest ways to make a normal room
appear magical is the construction of a skylight.
But such a ceiling-based opening can lead to
major privacy issues unless we have an
appropriate way of covering it up. This is where
motorized skylight Shades New York City comes in.
www.empirewindowtreatment.com
2
Introduction
Welcome to Empire Window Treatment, your reliable
destination for exceptional window treatment
solutions in the heart of New York. As a
dedicated small business, we take pride in
offering customized products and unparalleled
customer service.
At Empire Window Treatment Center, we offer a
wide range of quality window treatments including
top brand manufacturers such as Hunter Douglas,
Carole Fabrics, Comfortex, and more. Well take
your measurements free of charge and well
install your new treatments free of charge too.
3
5 Steps to Installing Motorized Window Shades
Take a look at these five simple steps that can
help complete your skylight installation with
such finesse that no worrying about sudden
malfunction is required.

• Gather the Necessary Tools and Materials

• Measure Your Windows

• Install the Mounting Brackets

• Program and Test the Shades

• Attach the Motorized Shades

4
Gather the Necessary Tools and Materials
Many different techniques can be used to set up
these shades. Because of this, the required set
of tools and equipment are also different for
each individual trying to set up these shades.
In general, you will need basics like a drill,
screws, level and ladder. Apart from the
motorized skylight shade itself, you will have to
find the right mounting tracks and brackets for
the setup.
www.empirewindowtreatment.com
5
Measure Your Windows
This is such an underrated step. Many first-time
builders make the mistake of eyeballing a window
because of which they end up with Window Shades
that are either too fragile or look too bulky to
be aesthetic.
We make this happen by

• Using a measuring tape to measure the skylight's
  length and width
• Measuring the depth of the skylight frame
• Recording all dimensions accurately

6
Install the Mounting Brackets
Depending on what measurements you have,
customize your mounting bracket to fit the
skylight. If you are comfortable with shortening
the bracket yourself, you can try it - otherwise,
you can request any professional workshop to do
it for you.

• Here is how to do this
• Marking bracket positions using a pencil
• Drilling pilot holes at marked spots
• Securing brackets with screws using a drill or
  screwdriver.
• Ensuring brackets are level and firmly attached
• Doing it all over again until the set-up is
  strong and aligned

www.empirewindowtreatment.com
7
Attach the Motorized Shades
This is the most important step. Follow the
guidelines provided by the manufacturer to slowly
attach the motorized shade with the bracket.
Double-check that the electrical circuit across
the shades is attached properly and follows a
consistent route. Make sure the shades are not
tilted or damaged in any way.
www.empirewindowtreatment.com
8
Program and Test the Shades
For remote and app-based products a proper
configuration is necessary. While this can be
confusing, it is also a lot more convenient in
the long run as you can supervise your privacy
even when you are out of the house.

• The program is done like this
• We use the shade's remote or app to enter
  programming mode
• We then set desired opening and closing times
• Testing the shade movement is all about ensuring
  the smooth operation
• We enable manual emergency commands
• We adjust settings as needed for optimal
  performance

9
For more Information
Contact Us
2125186378
www.empirewindowtreatment.com
empireblindsandcarpet_at_gmail.com
750 Lexington Ave suite 7-117,New York, NY 10022
10
Thank You
For Your Attention
www.empirewindowtreatment.com