Bomag BW 211 D-4BW 211 PD-4 Single Drum Roller Service Repair Manual Instant Download - PowerPoint PPT Presentation

About This Presentation
Title:

Bomag BW 211 D-4BW 211 PD-4 Single Drum Roller Service Repair Manual Instant Download

Description:

Bomag BW 211 D-4BW 211 PD-4 Single Drum Roller Service Repair Manual Instant Download – PowerPoint PPT presentation

Number of Views:0
Date added: 30 July 2024
Slides: 21
Provided by: kdd88s9idzok
Category:
Tags:

less

Transcript and Presenter's Notes

Title: Bomag BW 211 D-4BW 211 PD-4 Single Drum Roller Service Repair Manual Instant Download


1
Operating instructions Maintenance instructions
BW 211 D-4 / BW 211 PD-4
S/N 101 582 41 . . . .
Single drum roller
Catalogue number 008 119 31
06/2004
2
(No Transcript)
3
Foreword
BOMAG machines are products from the wide range
of BOMAG compaction equipment. BOMAGs vast
experience in connection with state-of-the-art
production and testing meth- ods, such as
lifetime tests of all important components and
highest quality demands guarantee maximum
reliability of your ma- chine.
Always keep this manual close at hand, e.g. in
the tool compartment of the machine or in a
specially provided container. These operating and
mainte- nance instructions are part of the
machine. You should only operate the machine
after you have been instructed and in compliance
with these instructions. Strictly observe the
safety regulations. Please observe also the
guidelines of the Civil En- gineering Liability
Association Safety Rules for the Operation of
Road Rollers and Soil Compac- tors and all
relevant accident prevention regula- tions. For
your own personal safety you should only use
original spare parts from BOMAG. In the course of
technical development we re- serve the right for
technical modifications without prior
notification. These operating and maintenance
instructions are also available in other
languages. Apart from that, the spare parts
catalogue is avail- able from your BOMAG dealer
against the serial number of your machine. Your
BOMAG dealer will also supply you with in-
formation about the correct use of our machines
in soil and asphalt construction. The above notes
do not constitute an extension of the warranty
and liability conditions specified in the general
terms of business of BOMAG GmbH. We wish you
successful work with your BOMAG machine. BOMAG
GmbH Printed in Germany Copyright by BOMAG
  • This manual comprises
  • Safety regulations
  • Operating instructions
  • Maintenance instructions
  • Trouble shooting
  • Using these instructions will
  • help you to become familiar with the machine.
  • avoid malfunctions caused by unprofessional
    operation.
  • Compliance with the maintenance instructions will
  • enhance the reliability of the machine on con-
    struction sites,
  • prolong the lifetime of the machine,
  • reduce repair costs and downtimes.
  • BOMAG GmbH will not assume liability for the
    function of the machine
  • if it is handled in a way not complying with the
    usual modes of use,
  • if it is used for purposes other than those men-
    tioned in these instructions.
  • No warranty claims can be lodged in case of dam-
    age resulting from
  • operating errors,
  • insufficient maintenance and
  • wrong fuels and lubricants.
  • Please note!
  • With this machine "CE" conformity is only
    achieved with the corresponding optional
    equipment.
  • This manual was written for operators and mainte-
    nance personnel on construction sites.

BOMAG
3
BW 211 D-4
4
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com
5
Foreword
Please fill in . . . . . . . . . . . . . . . . .
. . . . . . . . . . . Machine type (Fig. 1) . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. Serial-number (Fig. 1 and 2) . . . . . . . . .
. . . . . . . . . . . . . . . . . . . Engine
type (Fig. 3) . . . . . . . . . . . . . . . . . .
. . . . . . . . . . Engine number (Fig. 3)
i
Note
Fig. 1
Supplement the above data together with the com-
missioning protocol. During commissioning our
organisation will in- struct you in the operation
and maintenance of the machine. Please observe
strictly the safety regulations and all notes on
risks and dangers!
Fig. 2
Fig. 3
BOMAG
4
BW 211 D-4
6
Table of Contents
  • Technical Data Safety regulations
  • Indicators and Controls
  • General notes
  • Description of indicators and control elements
  • Operation
  • General notes
  • Tests before starting to operate
  • Starting the engine
  • Starting with jump wires
  • Driving the machine
  • Switching the vibration on and off
  • Operating the parking brake, stopping the machine
  • Shutting the engine down
  • Emergency exit
  • Adjusting the steering wheel
  • Adjusting the seat
  • Operating the hood
  • Towing in case of an engine failure
  • Transport

7 11 19 22 22 31 32 32 33 35 35 37 38 39 40 40 41
41 43 45 47 48 49 52 53 54 57 57 58 59 59 60 61 61
62 63 63 64 65 66 67
BOMAG
5
BW 211 D-4
7
Table of Contents
5.21 Change the fuel pre-filter cartridge 68
5.22 Checking, replacing the refrigerant compressor V-belt 69
5.23 Service the air conditioning 70
5.24 Check, adjust the valve clearance 73
5.25 Checking / replacing the ribbed V-belt 75
5.26 Check the engine mounts 76
5.27 Change the oil in the drive axle 76
5.28 Changing the oil in the wheel hubs 77
5.29 Change the oil in the vibration bearings 78
5.30 Retighten the fastening of the axle on the frame 79
5.31 Tightening the wheel nuts 80
5.32 Check the ROPS 80
5.33 Cleaning the oil bath air filter 81
5.34 Changing hydraulic oil and breather filter 82
5.35 Changing the hydraulic oil filter 83
5.36 Changing the coolant 84
5.37 Checking the injection valves 86
5.38 Service the combustion air filter 87
5.39 Adjust the scrapers 90
5.40 Adjust the parking brake 91
5.41 Changing the tires 92
5.42 Change the fresh air filter in the cabin 93
5.43 Tightening torques 93
5.44 Engine conservation 94
Trouble shooting 95
6.1 General notes 96
6.2 Engine 97
BOMAG
6
BW 211 D-4
8
1 Technical Data
BOMAG
7
BW 211 D-4
9
Technical Data
Fig. 4
Dimensions in mm A B D H H2 K L O1 O2 S W
BW 211 D-4 2960 2250 1500 2268 2972 490 5808 60 60 25 2130
BW 211 PD-4 2960 2250 1480 2268 2972 490 5808 60 60 25 2130

BW 211 D-4
BW 211 PD-4
Weights
Operating weight (CECE) kg 10950 11930
with ROPS and cabin Axle load, drum (CECE) kg 6280 7260
Rear axle load (CECE) kg 4670 4670
Static linear load kg/cm 29,5 -
Travel characteristics
Travel speed (1) km/h 0 ... 5 0 ... 5
Travel speed (2) km/h 0 ... 6 0 ... 6
Travel speed (3) km/h 0 ... 9 0 ... 9
Travel speed (4) km/h 0 ... 13,5 0 ... 13,5
Max. gradability (depend- ing on soil) 47 47
Engine
Engine manufacturer Type Cooling Number of cylinders Deutz BF4M 2012C Water 4 Deutz BF4M 2012C Water 4
Rated power DIN ISO 3046 kW 98 98
8 BOMAG BW 211 D-4
10
Technical Data
BW 211 D-4 BW 211 D-4 BW 211 PD-4
Rated speed Fuel Electrical equipment Drive system Driven axles rpm V 2300 Diesel 12 hydrostatic 2 2300 Diesel 12 hydrostatic 2
Brakes
Service brake Parking brake hydrostatic hydr.-mech. hydrostatic hydr.-mech.
Steering
Type of steering Steering operation articulated hydrostatic articulated hydrostatic
Vibration
Vibrating drum Drive system Frequency Hz 1 hydrostatic 30/36 1 hydrostatic 30/36
Amplitude mm 1,8/0,9 1,64/0,82
Tires
Tire size Air pressure bar 23.1/18-26/TL-8PR AWT 1,1 23.1-26/12TL R1 1,4
Filling capacities
Engine Litres 10 10
Fuel Litres 340 340
Hydraulic oil Litres 60 60
Coolant Litres 16 16
The right for technical modifications remains reserved
BOMAG
9
BW 211 D-4
11
Technical Data
  • The following noise and vibration data acc. to
  • EC Machine Regulation edition (98/37/EC) and
  • Noise Emission Regulation 2000/14/EC
  • were determined at nominal speed of the drive
    engine and with vibration running. The machine
    was standing on an elastic base.
  • During operation these values may vary because of
    the existing operating conditions.
  • Noise value
  • The sound level according to enclosure 1,
    paragraph 1.7.4. f of the EC-machine regulation
    is
  • sound pressure level at the work place of the
    operator (with cabin)

77.0 dB(A)
LpA
The nose emission value for the machine according
to the noise emission regulation 2000/14/EG
is guaranteed sound capacity level of the machine
109 dB(A)
LwA
These sound values were determined according to
ISO 3744 for the sound capacity level (LwA) and
ISO 11204 for sound pressure level (LpA) at the
place of the operator. Vibration value The
vibration values according to enclosure 1,
paragraph 3. 6. 3. a of the EC-machine regulation
are Vibration of the entire boy (drivers
seat) The weighted effective acceleration value
determined in accordance with ISO 7096 is ? ?0.5
m/sec2. Hand-arm vibration values The weighted
effective acceleration value determined in
accordance with EN 500/ISO 5349 is ? ?2.5 m/sec2.
BOMAG
10
BW 211 D-4
12
2 Safety regulations
BOMAG
11
BW 211 D-4
13
Safety regulations
Unintended use Dangers may, however, arise from
the machine if it is used by untrained personnel
in an unprofes- sional way or if it is used for
purposes other than those mentioned in these
instructions. Do not work with vibration on hard
concrete, on a cured concrete layer or heavily
frozen ground. Starting and operation of the
machine in an explo- sive environment is
prohibited.
  • General
  • This BOMAG machine is built in accordance with
    the latest technical standard and the valid
    technical rules and regulations. There is, how-
    ever, a risk of danger for persons and property
    if
  • the machine is used for purposes other than those
    it is intended for
  • the machine is operated by untrained person- nel
  • the machine is modified or converted in an un-
    professional way
  • the applicable safety regulations are not ob-
    served.
  • Each person involved in operation, mainte- nance
    and repair of the machine must there- fore read
    and apply these safety regulations. This should
    be confirmed by obtaining the sig- natures of the
    customer, if necessary.
  • Furthermore the following regulations and
    instruc- tions are obviously also valid

Who is allowed to work with the ma- chine? The
machine must only be operated by trained and
authorized persons which are at least 18 years of
age. The responsibilities for the operation of
the machine must be clearly specified and com-
plied with. Persons under the influence of
alcohol, medica- tion or drugs must not operate,
service or repair the machine. Maintenance and
repair tasks require specific knowledge and must
therefore only be carried out by trained and
qualified personnel.
  • applicable accident prevention instructions
  • generally acknowledged safety and road traffic
    regulations
  • country specific safety regulations. It is the
    duty of the operator to know and observe these
    regulations. This applies also for local
    regulations and the regulations for various types
    of manual work. If the recommendations in this
    manual differ from the regulations valid in your
    country, you must strictly observe the
    regulations in your country.

Conversions and alterations to the ma-
chine Unauthorized conversions to the machine are
pro- hibited for safety reasons. Original parts
and accessories have been special- ly designed
for this machine. We wish to make ex- pressly
clear that we have not tested or authorized any
original parts or special equipment not sup-
plied by us. The installation and/or use of such
products can impair the active and/or passive
driv- ing safety. The manufacturer expressly
excludes any liability for damage resulting from
the use of non-original parts or accessories.
  • Intended use
  • This machine must only be used for
  • compaction of bituminous materials, e.g. road
    surface layers. (AC and AD machines only)
  • medium and heavy compaction tasks in earth work
    (road sub-bases)
  • This machine must only be operated with fully
    functional safety equipment.
  • The machine should be checked by an expert once
    every year.

Safety notes in the operating and main- tenance
instructions
! Danger
Sections marked like this point out possible
dangers for persons.
BOMAG
12
BW 211 D-4
14
Safety regulations
Towing the machine You should generally use a tow
bar. Max. towing speed 1 km/h (1.6 mph), max.
towing distance 500 m (1640 ft.). Before
releasing the multi-disc brakes secure the
machine properly against unintended rolling.
! Caution
Sections marked like this point out possible
dangers for the machine or for parts of the ma-
chine.
i
Note
Sections marked like this provide technical
infor- mation concerning the optimal economical
use of the machine.
Checking the Roll Over Protection Structure (ROPS)
Environment
i
Note
Sections marked like this highlight activities
for the safe and environmental disposal of fu-
els and lubricants as well as replaced
parts. Observe all environment protection regula-
tions.
On machines with cabin the ROPS is an integral
part of the cabin. The machine frame must not be
distorted, bent or cracked in the area of the
ROPS fastening points. The ROPS must not show any
signs of corrosion, damage, hairline cracks or
open fractures. The ROPS must not rattle about
during driving. This would mean that it is not
properly fastened. All bolted connections must be
in accordance with the prescribed specifications
and correctly tight- ened (observe the tightening
torque values). Screws and nuts must not be
damaged, bent or deformed. With the cabin
installed check also the condition of the cabin
mounts (rubber elements and screws). Neither must
any additional parts be welded or bolted on, nor
must any holes be drilled without the permission
of the manufacturer, since this may im- pair the
strength of the structure.
Information and safety stickers/decals on the
machine Keep stickers/decals complete (see spare
parts catalogue) and fully legible and observe
their meaning. Replace damaged or illegible
stickers/decals im- mediately.
  • Loading the machine
  • Use only strong and stable loading ramps. The
    ramp inclination must be lower than the
    gradability of the machine.
  • Secure the machine against turning over or slip-
    ping off.
  • Secure the machine on the transport vehicle
    against rolling off, slipping and turning over.
  • Persons are highly endangered if
  • they step or stand under loads being lifted
  • they remain in the drive range of the machine
    during a demonstration or during loading.
  • The machine must not swing about when lifted off
    the ground.
  • Use only safe lifting gear of sufficient load
    bearing capacity.
  • Attach the lifting gear only to the specified
    lifting points.
  • Starting the machine
  • Before starting
  • Operation of the machine is only permitted when
    sitting in the operator's seat.
  • Use only machines which have been properly
    serviced at regular intervals.
  • Become acquainted with the equipment, the con-
    trol elements, the working mode of the machine
    and the area you will be working in.
  • Use your personal protective outfit (hard hat,
    safe- ty boots etc.).
  • Check before mounting the machine if
  • there are persons or obstructions beside or under
    the machine

BOMAG
13
BW 211 D-4
15
Safety regulations
Driving the machine Persons in the endangered
area If the machine has turned over and the cabin
door is jammed, use the right hand cabin window
as an emergency exit. Before starting or resuming
work and especially when driving backwards, check
that there are no persons or obstructions in the
endangered area. If necessary give warning
signals. Stop work im- mediately if persons
remain in the danger area de- spite the
warning. Do not step or stand into the
articulation area of the machine while the engine
is running. Danger of squashing! Driving In
events of emergency actuate the emergency stop
switch immediately. Do not use the emergen- cy
stop push button as service brake. Restart the
machine only after the danger, that has caused
the actuation of the emergency stop, has been
eliminated. If the machine has come in contact
with high-volt- age power lines
  • the machine is free of any oily and combustible
    material
  • all handrails, steps and platforms are free of
    grease, oils, fuels, dirt, snow and ice
  • the engine compartment hood is closed and locked
  • To climb onto the machine use steps and hand-
    rails.
  • Check before starting, whether
  • the machine shows any obvious defects
  • all protective devices are properly secured in
    their place
  • steering, brakes, control elements, lighting and
    warning horn are in order
  • the seat is correctly adjusted
  • the mirrors (if available) are clean and correct-
    ly adjusted.
  • Do not start the machine if any gauges, control
    lights or controls are defective.
  • Do not take any loose objects with you or fasten
    them to the machine.
  • On machines with ROPS you should always wear your
    seat belt!
  • Starting
  • Start and operate the machine only from the oper-
    ator's seat
  • For starting set all control levers to "neutral
    posi- tion".
  • Do not use any starting aids such as Start Pilot
    or ether.
  • After starting check all gauges.
  • Starting with jump leads
  • do not leave the operator's stand
  • warn others from coming too close to the ma-
    chine or touching it
  • if possible drive the machine out of the danger
    zone
  • have the power shut off.

Operate the machine only from the operator's
seat. Keep the cabin doors closed. Do not adjust
the seat while driving. Do not climb onto or off
the machine while driving. Change the travel
direction only while the machine is standing. Do
not use the machine to transport persons. Stop
the machine if you notice unusual noises or the
development of smoke. Investigate the cause and
have the fault corrected. Keep a sufficient
distance to excavations and em- bankments and
make sure that you work does not impair the
stability of the machine.
BOMAG
14
BW 211 D-4
16
Safety regulations
Parking on slopes and gradients Secure the
machine against rolling, place metal chocks in
front of and behind the drums.
Do not work with vibration on hard concrete, on a
cured concrete layer or heavily frozen
ground. When passing under flyovers, bridges,
tunnels, electric power lines etc. keep a
sufficient distance. Driving on slopes and
gradients Do not drive up and down gradients,
which exceed the max. gradability of the
machine. On lopes always drive directly up or
down. Change to the lower speed range before
approaching the slope. Wet and loose soils reduce
the ground adhesion of the machine and
inclinations and slopes consider- ably. Higher
risk of accident! Behaviour in traffic Match the
speed of the machine to the working
conditions. Always allow loaded transport
vehicles to pass. Switch the lights on when the
visibility is poor. Keep clear of edges and
embankments. Check the effect of vibration When
compacting with vibration check the effect of the
vibration on nearby buildings and under- ground
supply lines (gas, water, sewage, electric power
supply), stop vibratory compaction if neces-
sary. Do not work with vibration on hard (frozen,
con- crete) ground. Risk of bearing damage!
Filling the fuel tank Do not inhale fuel
fumes. Refuel only after shutting the engine and
the aux- iliary heater down. Do not refuel in
closed rooms. No open fire, do not smoke. Do not
spill any fuel. Catch running out fuel, do not
let it seep into the ground. Wipe off spilled
fuel. Keep fuel free of dirt and wa- ter. Leaking
fuel tanks can cause explosions. Ensure tight fit
of the fuel tank filling cover, replace it if
nec- essary. Fire protection measures Make
yourself acquainted with the location and the
operation of fire extinguishers. Observe fire
warn- ing and fire fighting installations.
Maintenance Observe the maintenance tasks
described in the operating and maintenance
instructions, including the exchange of
parts. For service and repair work in the engine
compart- ment support the engine compartment
hood. Maintenance work must only be carried out
by qualified and authorized personnel. When
performing maintenance work above body height use
the access steps on the machine or any other safe
ladders and working platforms. Do not use machine
parts as access steps. Keep unauthorized persons
away from the ma- chine. Do not perform
maintenance work with the ma- chine driving or
the engine running. Park the machine on
horizontal, level and stable ground. Pull the key
out of the ignition switch. Lock the articulated
joint with the articulation lock.
  • Parking the machine
  • Park the machine on level and firm ground. Before
    leaving the machine
  • straighten the articulated joint to allow easy
    access to and from the machine.
  • return the travel lever to neutral position
  • apply the parking brake
  • shut the engine down and pull the ignition key
    out.
  • lock the cabin
  • secure the machine against unauthorized use.
  • Do not jump off the machine, use access steps and
    hand rails.
  • Always secure parked machines, which could be in
    the way, with appropriate measures.

BOMAG
15
BW 211 D-4
17
Safety regulations
  • Do not mix up hoses by mistake.
  • damage or deformation of the fitting, which im-
    pairs the function and strength of the hose/ hose
    connection.
  • Only genuine BOMAG hydraulic hoses ensure that
    the correct type of hose (pressure range) is used
    at the right place.
  • Working on the engine
  • Shut the engine down before opening the engine
    compartment hood.
  • Drain the engine oil at operating temperature -
    danger of scalding!
  • Wipe off spilled oil, catch running out oil and
    dis- pose of environmentally.
  • Store used filters and other oily materials in a
    sep- arate, specially marked container and
    dispose of environmentally.
  • Do not leave any tools or other objects, which
    could cause damage, in the engine compartment.
  • Idle speed and full load speed must not be
    changed, since this would have a negative effect
    on the exhaust gas values and cause damage to
    engine and drive.
  • Turbo chargers work with high speeds and high
    temperatures. Keep hands, tools and materials
    away from the intake and outlet openings of the
    turbo charger and do not touch any hot surfaces.
  • Check and replace the coolant only when the en-
    gine is cold.
  • Catch running out coolant and dispose of environ-
    mentally.
  • Working on electrical equipment
  • Before working on electrical equipment disconnect
    the battery and cover it with insulating
    material.
  • Do not use any fuses with higher ampere ratings
    or repair a fuse with a piece of wire. Fire
    hazard!
  • Always disconnect the battery before starting to
    wled on the machine.
  • Working on the battery
  • When working on the battery do not smoke, do not
    use open fire.

Working on hydraulic lines Always relieve the
pressure in the hydraulic circuit before working
on hydraulic lines. Hydraulic oil es- caping
under pressure may penetrate through the skin and
cause severe injury. In case of being in- jured
by hydraulic oil you should immediately seek
medical advice, as otherwise this may lead to se-
rious infections. When adjusting the hydraulic
system do not stand behind or in front of the
drum/wheels. Do not change the setting of high
pressure relief valves. Drain hydraulic oil at
operating temperature - dan- ger of
scalding! Catch running out hydraulic oil and
dispose of en- vironmentally. Always catch and
dispose of biological hydraulic oils
separately. Do not start the engine after
draining off the hy- draulic oil. Once all work
is completed (with the system de- pressurized!)
check all connections and fittings for tight and
leak-free fit. Changing hydraulic hoses All
hydraulic hoses must be inspected visually at
regular intervals. Hydraulic hoses must be
changed immediately if
  • the outer layer is worn down to the metal lining
    (e.g. chafing, cuts, cracks)
  • embrittlement of the outer layer (development of
    cracks in the hose material)
  • deformation under pressurized and depressu- rized
    condition, which are not in accordance with the
    normal shape of the hydraulic hose
  • deformation in bends, e.g, squeezes, kinks, layer
    separation, formation of blisters
  • leakages.
  • non-observance of the installation require- ments
  • separation of the hydraulic hose from the fit-
    ting
  • corrosion of the fitting, which impairs the func-
    tion and the strength.

BOMAG
16
BW 211 D-4
18
Suggest If the above button click is invalid.
Please download this document first, and then
click the above link to download the complete
manual. Thank you so much for reading
19
Safety regulations
Metal objects (e.g. tools, rings, wrist watches)
must not contact the battery poles - danger of
short circuit and burns! When recharging
maintenance free batteries re- move the plugs to
avoid the accumulation of explo- sive gases. When
using an external battery to start the ma- chine
follow the respective instructions. Dispose of
old batteries environmentally. Switch the
charging current off before removing the charge
clamps. Ensure good ventilation, especially when
charging the battery in a closed room. Working on
the fuel system Do not inhale fuel fumes. No open
fire, do not smoke, do not spill any fuel. Catch
running out fuel, do not let it seep into the
ground and dispose of environmentally. Working on
wheels and tires Explosion like bursting of tires
and parts of rims and tires can cause severe or
even deadly injuries. Assemble tires only with
the appropriate knowl- edge and tools. If
necessary have the tires assem- bled in a special
workshop. Ensure correct tire pressure and do not
exceed the highest specified pressure. Check
wheels and tires every day for specified
pressure, cuts, bulges, damaged wheel rims,
missing wheel studs and nuts. Do not drive with
damaged tires or wheels. Anti-stick emulsions for
tires must only be mixed using water and
concentrated anti-stick agent ac- cording to the
specifications of the manufacturer of the
anti-stick agent. Observe the regulations for the
protection of the environment. Cleaning Do not
clean the machine while the engine is run-
ning. Do not use gasoline or other combustible
sub- stances for cleaning purposes. When using
steam cleaning equipment do not subject
electrical components and insulating ma-
  • terials to the direct water jet, but cover them
    be- forehand.
  • Do not guide the water jet into the exhaust or
    into the air filter.
  • After maintenance work
  • Reinstall all protective devices after completing
    the maintenance work.

Repair Attach a warning tag to the steering wheel
if the machine is defective. Repairs must only be
performed by qualified per- sons who have been
instructed for this purpose. Use our repair
instructions. Exhaust gases are highly dangerous!
Always en- sure an adequate supply of fresh air
when starting in closed rooms! Test Depending on
the type of application and the op- erating
conditions vibratory equipment has to be examined
by a specialist whenever required, but at least
once every year.
BOMAG
17
BW 211 D-4
20
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com
Write a Comment
User Comments (0)
About PowerShow.com