Case IH 530 Tractor Operator’s Manual Instant Download (Publication No.9-913)

1
530 Tractor Operators Manual
9-913
epr ted
2

• This symDo/ means ATTENTION! BECOME AL.ERT! VOUR
  SAFETY IS INVOLVED. The message that follows the
  symbol contains important information about your
  safety. Carefully read the message. Make sure you
  fully unz/erstanc/ the causes of possi6/e injury
  or death. SB001
• IF THIS MACHINE IS USED BY AN EMPLOYEE, IS
  LOANED, OR IS RENTED, MAKE SU R E THAT THE OPE
  RATO R UND ERSTA NDS THE TWO INSTRUCTIONS BELOW.
• BEFORE THE OPERATOR STARTS THE ENGINE
• GIVE INSTRUCTIONS TO THE OPERATOR ON SAFE AND
  CORRECT USE OF THE MACHINE.
• MAKE SURE THE OPERATOR READS AND UND ERSTAN DS
  THE OPERATOR'S MANUAL FOR THIS MACHINE.

• IMPROPER OPERATION OF THIS MACHINE CAN CAUSE
  INJURY OR DEATH.
• BEFORE STARTING THE ENGINE, DO THE FOLLOWING
• READ THE OPERATOR'S MANUAL.
• READ ALL SAFETY DECALS ON THE MACHINE.
• CLEAR THE AREA OF OTHER PERSONS.
• LEARN AND PRACTICE SAFE USE OF MACHINE CONTROLS
  IN A SAFE, CLEAR AREA BEFORE YOU OPERATE THIS
  MACHINE ON A JOB SITE.
• It is your responsibility to observe pertinent
  laws and regulations and to follow manufacturer's
  instructions on machine operation and
  maintenance.
• See your Authorized Case dealer for additional
  operator's manuals, parts cat- alogs, and service
  manuals.

_at_ 1995 Case Corporation CASE and IH are
registered trade marks of Case Corporation
3
To the Purchaser of a Case Tractor, The care
you give your new Case Tractor will greatly
deter- mine the satisfaction and service life
you will obtain from it. Use this manual as your
guide. By observing the instructors and
suggestions in this manual, your Case Tractor
will serve you well for many y .ars. As an
Authorized Case Dealer, we stock Geninue Case
Parts, which are manufactured with the same
precision and skill as the original equipment.
Our factory trained staff is kept well informed
on the best methods of servicing Case equipment
and is ready and able to help you. Should you
require additional aid or information, contact
us. Your Authorized CASE DALER
to insure eflcient and prompt service, please
furnish us ttith the Model and Serial Nom6er o/
your tractor and Serial Num- ber l i ur
engine, in all correspondence or contacts.
4
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com
5
YABLE OF CONTENTS
Serial Numbers General Specifications ............
..................................................
..................................................
...........
8 9-t6 17-35 Pressure Fittings ....... .....
..................................................
..................................................
.......... 2O,21 Engine Lubrication 22-25 2Y 27 29
30 31, 33 33 34 35 37-88 38 40-45 46 47, 48 4
Lubrication ............................
Transmission Lubrication ...... .. Steering Gear
Converter Reservoir Converter Oil Filter
..................................................
.......................... ..............
......... . .. Hydraulic System
..................................................
..................................................
.......................... Independent P.T.
0........................ ........................
.................... ... ............... ......
...........
Belt Pulley Rear Mounted . -
Power Steering .. ........................ ... .
........................ .......... .
Operating Instructions ...........................
............._....................................
............. .........
Pre-Stamng Check List ............................
..................................................
................................ Operating
Controls and Instruments .........................
..................................................
.. Run-In Procedure .....................
..................................................
._........................................._.....
Engine Starting Procedure ............-..........
...........-......................................
....................... tO lTlg E LI,UID .....
...... ...........................................
............................... ............ ...
.......................
Cold Weather Operation .................................................................................................. 49
DUal-Rallge Shuttle ........................... ...................... . ................................................................. 53
rl3)-RgaI1Z,e DRIVE ....... .......... ... ............................ ... . ................................................... Operating Case-O-Matic Drive .................................. ............................................... 55-57
Di8erential Brakes ................ ...... ........................................................................................ 55
ITlde ef1dtIlt T. . ...................................................................................................................... b(I
Constant-Running P.T. 0. .................................... .......................... . 61
Rear Wheel Spacing . .................. ........................................................... ............. 64 70
l
' E ne Hheh ndHIldraulic S stem
7473 78 79-80 81 82-86 87-89 90-91 93-99 100 . 10
1-128 02-10? 109-111 112 114 115-121 122 124 J25
126
Three-Point Hitch (With Swinging Draft ms). .
.. ..1.. .. .... .. . . ..... .
Remote (Portable) Cylinder Attachment...
... ........ .......... Drawbar
Belt Pulley . .. ...... ............
Accessory Tractor Equipment
... . .. ..... . .. . . . .
Important Checks During Operation
................ .
Service Suggestions .... .................... .
. . ..... .... . .. . .. .
Fuel Recommendations ...........
........ ....... .................
Preventive Maintenance . . ............. ....
........ ... .. .. ....
Coollng System ...................................
.......................................... .......
..................._.................... Fuel and
Fuel System .................... .
......................... ..... ....... .
. Covernor and Engine Speed.......................
....................... .................... Valve
Adjustment ............................ Ignition
and Electrical Equipment . . ..... .
.......................................
............ ....... Front Wheel Bearings
...........-......................................
.............. .................. .
...................... Flywheel
Clutch -........... -.............................
.......................-.............
............. .. . Adjusting P.T.O. Clutch
..................................................
........ . ...... .. . ....... Diflerential
Brakes ............ .............................
..................................... .......
........... . ........
T2 1i2 2 tO rf g IN . . ......
..................................................
......................................-.....
................... .. - Index ... .. .......
............ ......................
..................................................
.................... 129-130 Step y arty .
.............. ..... .............................
............................... -..... -. .
-..- ' Rear Pages
6
(No Transcript)
7
CASE MODEL 540 UTILITY 4-WHEEL TRACTOR
8
INTRODUCTION (CASE "530" SERIES TRACTORS) Here's
just a few outstanding features of the Case "530"
Series Tractors 1. "POWR-TORQ" ENGINE. A
high-compression, heavy-duty power 159 cubic inch
engine and extremely high torque. Full pressure
lubrication with "spin-on" full-flow oil filter.

• HEAVY-DUTY CLUTCH. New clutch design with 509a
  more "torque- carrying" capacity. Smooth,
  long-life operation.
• SPEED CONTROL. "All-Steel" friction type hand
  throttle with finger tip, finger-ease control.
• CAM AND LEVER STEERING. Smooth-as-silk,
  shock-proof steering for accurate, instant
  control of front wheels. Power steering
  attachment avail- able as extra equipment.
• DIFFERENTIAL BRAKES. High-capacity , velvet
  touch, brakes. Simple to adjust, a breeze to
  service
• HEAVY-DUTY TRANSMISSION. Standard (4) speed
  transmission provides speeds of 2.7, 4.0, 5.2,
  12.9 m.p.h. forward, and a speed of 3.2 m.p.h, in
  reverse. A special high speed road gear is also
  available as a factory installed extra.
• TWELVE-SPEED "TRIPL-RANGE" DRIVE (EXTRA). This
  remarkable
• power train provides forward speeds from 1.6 to
  21.5 m.p.h. and reverse speeds from 1.9 to 5.4
  m.p.h. (see page 11).
• DUAL-RANGE SHUTTLE (EXTRA). Provides (8) speeds
  forward and (S) speeds in reverse. Provides
  faster working cycles when using a front end
  loader since reverse speeds are 25'ñ faster than
  forward, in any gear. (see page 11).
• CONSTANT-RUNNING POWER TAKE-OFF (EXTRA). This is
  a straight-
• line power shaft from engine to rear shifter
  fork. In use, it allows the rear wheels to be
  stopped, while the P.T.O. shaft rotation remains
  at a normal speed.
• SNAP-LOCK EACLE HITCH. Improved, enclosed,
  streamlined assembly with quick, simple implement
  attaching points. Handier than ever, more
  compact, more lifting power, greater ease of
  operation. And for y.our safety a built-in
  "hydraulic interlock" to prevent accidental
  "dropping" of mounted tools. Double control and
  remote cylinder system can easily be attached at
  any time.
• THREE POINT HITCH (Swinging Draft Arms). This is
  an optional hitch which will accommodate
  rear-mounted tools other than Case. This hitch
  is actuated and controlled by the same hydraulic
  system as the Eagle Hitch linkage.
• CHOICE OF MODELS. 1. A low-silhouette "540"
  Utility tractor with a solid front axle. 2. A
  standard general purpose model "541" with dual
  front wheels. This model is also available with
  an adjustable front axle as extra equipment.

10.
9
INTRODUCTION (CASE "530 C" SERIES CASE-0-MATIC
TRACTORS)
zosvz zsodØnu ivzJ gø s s igoow gsvs
10
INTRODUCTION (CASE "530C" SERIES TRACTORS) l.
"POWR-TORQ" ENGINE. A high-compression,
heavy-duty 159 cubic inch engine with an
extremely high torque. What's more it operates on
regular grade gasoline. L. P. Cas engines are
also available as optional equipment.

• 2. CASE-O-MATIC DRIVE. Gives you extra work
  power, automatically, as you need it. No jerking
  no stalling just select the proper
  transmission working range, open the throttle and
  go to work! "Case-O-Matic" drive doubles the
  pulling power in tough going, without shifting.
  "Case-O-Matie" drive permits automatically
  slower ground speed without slowing power
  take-off operation allows the driven machine to
  clear itself without stop- ping, shifting or
  clutching your tractor.
• DUAL-RANCE DRIVE (Extra). This transmission,
  coupled with the Case- O-Matic torque converter,
  provides the operator with 8 speeds forward and
• 2 in reverse (two complete working ranges). The
  standard 4 speed trans-
• mission is also available with an optional
  high-speed road gear installed.
• 4. DUAL-RANCE SHUTTLE (Extra). Provides (8)
  speeds forward and (8) speeds in reverse.
  Provides faster working cycles when using a front
  end loader since reverse speeds are 25 be faster
  than forward, in any gear.
• DIFFERENTIAL BRAKES. High-capacity , velvet
  touch, brakes. Simple to adjust, a breeze to
  service. A "Lock-A-Matte" parking latch releases
  aut- omatically when brakes are reapplied.
• INDEPE1'iDENT POWER TAKE-OFF (Extra). Hand
  operated clutch permits engagement or
  disengagement of power take-o without stopping
  forward travel of tractor. Output shaft rotates
  at 541 r.p.m., (at 1970 engine rpm)
• BELT PULLEY-REAR MOUNTED (Extra). This
  attachment is attached to and driven from the
  power take-off. Pulley measures 101/ X 6 and
  rotates at 1180 r.p.m. (at 2000 engine r.p.m.)
• SNAP-LOCK EAGLE-HITCH. Improved, enclosed,
  streamlined assembly with quick, simple implement
  attaching points. Handier than ever, more
  compact, more lifting power, greater ease of
  operation. And for your safety a built-in
  hydraulic interlock to prevent accidental
  "dropping" of mounted tools. Double control and
  remote cylinder system can easily be attached at
  any time.
• THREE-POINT HITCH (Swinging Draft Arms). This is
  an optional hitch which will accommodate
  rear-mounted tools other than Case. This hitch
  is actuated and controlled by the same hydraulic
  system as the Eagle Hitch linkage.
• CHOICE OF MODELS. 1. A low-silhouette model
  "540C" Utility tractor with a solid front axle
  2. A standard general purpose model "54lC" with
  dual front wheels. This model is also available
  with an adjustable front axle as extra equipment.

3.
5.
6.
7
11
TRACTOR SERIAL NUMBERS When ordering parts from
your Authorized Case Dealer, always specify the
Serial Number and Model of your Tractor. As a
means of ready reference fill in the serial
numbers along with the model number of your
tractor, in the spaces provided here.
Eng inc Seri ol Homber
When ordering Tractor Parts, spe- cify the
Tractor Model and Serial Number, located on
the side of the tractor dash.
Use the Engine Serial Number, stamped on the
right side of the en- gine block, when
ordering Engine Parts.
NGINE SERIAL NUMBER
Fig. 1. Trocfor Number Fig. 2. Engine Number The
information compiled in this manual covers the
operation and preventive maintenance on the Case
530 Series Tractors. It is our hope that this
manual will help you to understand the correct
care and use of these Lractors. If you should
require additional information or services of a
trained mechanic, be sure to see your authorized
CASE DEALER. NOTE The terms Right Hand and
Left Hand whenever used in this manual apply to
the tractor when facing in the direction the
tractor will move in forward operation.
8
12
GENERAL SPECIFICATIONS CASE 530 SERIES
TRACTORS (Covered in this \Iarrual)
Tractor Model Type Engine Transmission Dr Cli itch Dri-.e Dy Clutch Drive Case-O- Iatic
540 541 Utility 4-\\heel Gen. Purpose 1ñ9 cm. in. Spart Ignition Transmission Dr Cli itch Dri-.e Dy Clutch Drive Case-O- Iatic
540C Utility 4-\Vheel Engine Transmission Dr Cli itch Dri-.e Dy Clutch Drive Case-O- Iatic
54IC Gen. Purpose Transmission Dr Cli itch Dri-.e Dy Clutch Drive Case-O- Iatic
9
13
GENERAL SPECIFICATIONS ENGINE (GASOLINE) GENERAL
T pe Firing Orcler C linder Bore Stroke Pistin
Dis lacemcnt Com session Ratio (Casoline)
. Four Cylinder Overhead Valve . 1 3 4
2 ...3''c inches . .4Va inches
.......... .... ..... ......... .........
.159 cubic inches 7.42 to 1 ..Replaceable .
Positive Type
\alse Cuifes Exl4 aust Valve Rotators (Casoline
only) Vals e Clearance Cy linder Sleeves Air Cfc
aner Full Load En(ine Speed (direct driv e) No
Load E mine Sneed (direct drive) Full Load
Enine Speed (Case-O-SIatic) h'o Load E mine
Speed (Case-O-ñJatic) Engine Idling
Speed Covernor Type Engine SPeed Control
. .014 (cold) . . .. ..Wet Replaceable Type Oil
Bath Type
. .
1900 R.P.XI. . 2050 R.P.M. 2100 R.P.M. 2250 R.P.M.
500 R.P.II. Case Sensitive Flyweight Friction
Type Hand Control and Foot Throttle Control
PISTONS AND RODS
Rings Per- Piston ..... . .... .................
. . . Number of Compression Rings ... . .. .. ..
..
4 3
U ITI C F JO( 1 R11Q S .........................
.............. . Piston Pins .... .. . . .
....... . .... .. ................... ..... .. .
....................... ....... . . ....
.............. ....Full Floating
Connecting Rod Bearings .
.. .............. ....Precision Insert Type MAIN
BEARINGS
Number of Bearings Type of Bearings
3 ...Precision Insert Type
........... ........ . . ....... ENGINE
LUBRICATION SYSTEM
14-20 lbs. (at 1900 R.P.NI.) . Cear Type With
Floating Intake Full-flow Replaceable fi'nit
Oil Pressure Oil PutnJ Oil Filter
FUEL SYSTE/4 Carburetor .... ......... ...
............ .....................................
........................ . .... .
................1-1/4 S.A.E. Flange
Fuel Strainer Fuel Gage
. ...In Sediment Bowl Under Tank ..............Ele
ctric, Instrument Panel Dial COOLING SYSTEMS
Pressurized System with 4 lb. Pressure Cap
Radiator Temperature Control Fan \"ater Pump
. Tube and Fin Construction 180 Thermostat 18
Four Blade, Belt Driven Pre-lubricated Bearings
10
14
ELECTRICAL AND IGNITION SYSTf4 Ignition Switch
................. ......................
.............. . ........ ..... ... ., . . .. .
..Includes Key Battery (dry charge type) Croup
II...I2 Volt, 50 Amp. Hr. Positive Post Crounded
Spark Plugs Champion No. D16 (or equivalent)
.......... .....Thread 18 mm, Gap .025
Distributor ... ...................
. ......................Automatic Advance 26
Point Cap .020 Generator (2-brush type) .. .
.... ................... ............... .. .
...... ..... .............With Voltage Regulator
Startings Motor . .-..... .. ...............
......... . ...With Sealed Starter Driver Head
Lights . . .. ........ .......35a Watt, 12
Volt, Sealed Bream Units Rear Light . ......
...... ... ...12 Volt, Combination Tail and Flood
with Electrical Outlet
for Safety Light Attachment .........Dash
Location 20 Amp. in Light Circuit
Fuse ...... . .. .. . .
(MODELS "540-541") FLYWHEEL CLUTCH (FOOT
OPERATED) 4-Speed or Tripl-Range Transmission
................... ...Sing1e Plate, Dry Disk,
(10 dia.) Shuttle Transmission
..................................................
.......Single Plate, Dry Disk, (11
dia.) Throw-Out Bearing . ... ...................
................................. ................
...........Sealed, Ball-Thrust "CASE-O-MATIC"
DRIVE (MODEL "540C-541C") "Case-O-Static"
Drive .. ... .. .. ....... .......................
. 11 Torque Converter Main Drive Actuation
Clutch ..........................................
. ....... ...... .... .. .. . . Foot Pedal
Control Direct Drive Lock-up Clutch... .....
.......... .Hand Lever Control TRANSMISSION
OPTIONS Standard 4-Speed ........... .... .....
... ..... ................. (available for all
"530" Series Tractors) High speed fourth gear
(optional) Tripl-Range 12-Speed ......... . .....
. . ... .......... .. ..... .. (available for
540-541) Case-O-Matic 8-Speed ...................
................... ......... . (available for
540-541)
(High speed road gear standard) (available for
540-ñ41) (High sJeed road gear standard)
Dual-Range Shuttle 8-speed
BRAKES Type . ..... .... .........................
..................................................
.........................Heavy Duty, Differential
Brakes
Pedals ......
. . .. . ..Can Be Locked Together or Operated
Independently Lock-A-Matte Pedal Catch for
Parking or Belt Work
STEERING GEAR AND FROur AxLEs .....
................Cam and Lever gear with
center-line control ..Cen. Purp. Tractors Dual
or Adjustable Front Axles
Steering Gear Type Front Axle Type
Utility Tractors, Fixed Front Axle Power Steering
Attachment ... .. ................................
.... ...Available for All Model
Tractors CONSTANT-RUNNING POWER TAKE-OFF (MODEL
"540-54J") Method of Engagement
................. ...............-.....
.. .........Tractor Foot Clutch Pedal Rotation
......... ................. ......................
. .................. ...............
...Clockwise (from rear of tractor)
. .... Standard 1-3/8 A.S.A.E. spline ...533
R.P.M. (at 1750 Engine R.P.M.)
Output Shaft . ... ...... ...........
.....................-. ..... . Speed . . ......
.. . . ... Factory Instollotion Only.
15
INDEPENDENT POWER TAKE-OFF (CASE-0-MATIC)
Method of Engagement Rotation Output Shaft Speed
..Hand Operated Clutch Lever . Clockwise (from
rear of tractor) Standard 1-3/8 A.S.A.E. spline
541 R.P.41. (at 1970 Engine R.P.II.)
................ . .. ....
BELT PULLEY ATTACHMENT
(530 Series) Location Pulley Diameter 9-1/4
...Right Hand Sid,e
(5.3P Series) Full-Load Speed . 1290 R.P.M. _at_
1900 engine R.P.M.
(530 Series) Belt Speed Per Min., Full-road
3125 Rear of Tractor
(530 Series) Location Pulley Diameter l0/g
(530 Series) Full-Load Speed . I200R.P. M. (at
1900 engine R.P.M.)
. 3200 . Rear of Tractor
(530 Series) Belt S eed Per Clin., Full-Load
(530C Series) Location .. Pulley Diameter
101/a..........
(530C Series) Full-Load Speed (530C Series)
Belt Speed Per 'Clin.
1200 H.P.M. (at 2100 engine R.P.M.) ...3200
EAGLE HITCH AND HYDRAULIC SYSTEM Type
System . ........... ...........
.. ...Single-Acting with Floating
Piston Hydraulic Pump . . .... ..
................ .. ......... ...Continuous
Running, Built-in Relief Valve
.......................1300 to 1500
P.S.I. ...........Hand operated (With Adjustable
Limit Stops)
Relief Valve Pressure
Control .. Filter
....................Edge-Wound Paper Element
(Removable for Cleaning)
Safety Interlock ...Built-in Unit, Prevents
Accidental Dropping of Implements Fluid
Recommendations . S.A.E. 10W (MS-DC Grade) Engine
Oil RE/\/\OTE (PORTABLE) COFITROL SYSTEM Remote
(Portable Cylinder) ..............................
..............3-1/4 inch dia. 8 inch Stroke
Remote Cylinder Control ............... ..... .
Stacked Control Valve with Matched Controls and
Control Lever
Remote Cylinder Couplings ......
...Case Quick-Detachable Breakaway Couplings with
Dust Plugs
THREE-POINT HITCH (SWINGING DRAFT
ARMS) ..Flexible Swinging Draft Arms with Ball
Couplers
Type ... .... .......
Hydraulic System .. .. . . . ... Same System
and Controls as Eagle Hitch Stabilizer Bars and
Stay Chains Available for Rigid Draft Arm Action
16
APpRoxiuATE CAPACITIES
U.S.
Imperial
Cooling System .....(Quarts) 14 11.62
Engine Crankcase . .. . . .......................(Quarts) 4 3.32
(with filter) ...(Quarts) 5 4.15
Air Cleaner Oil Cup ...(Pints) 1.66
Hydraulic System (Torque Tube) Case-O-Matic System ...(Quarts) Refer to Page 19 16 13.3
Fuel Tank (Casoline) .(Callons) 22 18.3
Transmission Case (Cen. Purpose) . ..tGallons) 7 5.81
(Change) (Gallon) 6 4.98
Transmission Case (Utility) ...........................(Quarts) lf 14.11
Belt Pulley Housing (Case-O-Matic)..(Pints) 1 0.83
Independent P.T.O. (Case-O-Matic) . (Quarts) 0.83
TIRE SIZES AVAILABLE General Purpose Tractor 5.50-
16, 4-ply
Utility Tractor 6.00-16, 4-ply 6.00-16,
6-ply 7.50-16, 4-ply 7.50-16, 6-ply 7.50-l6,l4ply
Front Tires (Standard) Front Tires (Optional)
Front Tires (Optional) Front Tires (Optional)
Front Tires (Optional)
Front Tire (Single Front Wheel)............. Rear
Tires (Standard) Dry CIutch Drive Rear Tires
(Standard) Cose-O-Mofic -- Rear Tires (Optional)
.. .......... .. Rear Tires (Optional)
9.00-10, 8-ply 1L.4-28 4-ply 13.6-28,
4-ply 14.9-28, 6-ply
11-24, 4-ply 11-24, 4-pier 14.9-28, 6-ply 13-24,
6-ply
TRAVEL SPEEDS NOTE For comprehensive speed
charts of 53O Series Tractors, equipped with
various types of Transmissions, refer to pages
51, 52, 53 and 54.
17
GENERAL
DIMENSIONS
Fig. 3. Mode) "541" and "541C" General Purpose,
Dual Front Wheels
Front Wheel Spacing Rear Wheel Tread . .. .
...-.....61J/ and 11 ...48 to 88 . 7We .
.79/ ...................... ... .. .... ..
21ltz
Overall Width (Over end of axles) . ... . .. .. .
... . Turning Radius (without brakes) Crop
Clearance (under rear axle)
Approximate Weight (Standard Tractor) . .... .
(3234 lbs. 541) (3771 lbs. 54lC) 14
18
GENERAL
SPECIFICATIONS
Fig. 4. Model 5 4 ï and 54J C General
Purpose, Ad usot ble Front Axle
Front W'hee1 Tread (optional) (optional)
(optional) Rear Wheel Tread . . Overall Width
(Over ends of axles)
. 52 - 80 . .... .. .. .48 - 72
. . 44 - 64 . .. 48 to 88 . 7W/a 9/a feet
21a
. .. ..
.... . ... ...........
.. ... . . .......... .... ...
. .. ...
Turning Radius (without brakes) .. . . ... .
Crop Clearance (under rear axle) Approximate
Weight (Standard Tractor).....
.... (3354 lbs. 541) (3990 lbs. 541C)
15
19
GENERAL DIMENSIONS

D


l
!i! i
Front Wheel Tread .. . Rear Wheel
Spacing Overall Width (minimum) ...... Turning
Radius (ithout brakes)
...47/ ...48 to 65 .... ........63Y4
n
- .
...-............. ........ ..
......
.... ......................... .... ..10 foot
Front Wheel Toe-In ...............................
..................................... ............
..............Ya to _at_ Approximate Weight
(Standard Tractor) .. ... ...... .. ...3071 lbs.
(540) 3224 (540C) 16
o r
s

20
Suggest If the above button click is invalid.
Please download this document first, and then
click the above link to download the complete
manual. Thank you so much for reading
21
(No Transcript)
22
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com