Case IH AFS Pro 700 AFS Field Performer Large Tractors Trip Computer Precision Farming Operator’s Manual Instant Download (Publication No.47426391)

1
AFS Pro 700 AFS Field Performer Large
Tractors Trip Computer Precision Farming
SOFTWARE OPERATING GUIDE Software Version 28.
Part number 47426391 1st edition English December
2012
2
Contents

• GENERAL
• Manual scope. . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . 1-1
• ICONS AND WINDOWS VEHICLE ICONS
• Status and warning icons. . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  2-1
• PERFORMANCE AND VEHICLE WINDOWS
• Left-hand area . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . 2-2
• "Home" screen. . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . 2-3
• Performance windows . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . 2-5
• Vehicle and "Framework" application windows. . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . 2-17
• SETUP
• REMOTE VALVES
• Introduction . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . 3-1
• Variable flow controls . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . 3-1
• Remote valve timers. . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . 3-5
• Valve locks. . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . 3-9

3
Introduction . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 4-17 Record a sequence. . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 4-18 Download a sequence
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 4-21 Play a
sequence . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. 4-24 Manage sequences. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 4-26 SERVICE REMINDERS Maintenance
schedule . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
4-28 Service reminder operation. . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. 4-31 Sharing the display between vehicles . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 4-35
4
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com
5
(No Transcript)
6

• 1 - GENERAL
• 1 - GENERAL
• Manual scope
• This manual covers the AFS Field Performer
  functions for the Large Tractors, Trip
  Computer, and Precision Farming applications.
  The manual assumes that you have read and
  understood the contents of the display manual in
  preparation for this manual.
• This application manual is organized as follows
• Chapter 2 explains the control and reporting
  windows for monitoring productivity and
  performance during crop production.
• Chapter 3 explains how to use software features
  for
• The remote valves
• The rear hitch
• Automatic Productivity Management (APM)
• Auto-PTO
• Chapter 4 explains how to
• Monitor productivity and performance
• Use the electronic End of Row (EOR) system
• Use the service and maintenance features

1-1
7
1 - GENERAL
1-2
8
2 - ICONS AND WINDOWS
2 - ICONS AND WINDOWS VEHICLE ICONS

• Status and warning icons
• The left-hand area is visible on all screens and
  is split into three areas for your tractor
• The status and warning icon area (1)
• The horizontal sequence bar that is used by the
  elec- tronic End Of Row (EOR) system (2) (see
  4-17 for in- formation on this feature)
• The window area that provides operator-selected
  per- formance information, productivity
  information, or maps (3)

RCIL09DSP064BAG 1
Six status icons are specific to the Large
Tractors ap- plication and display in the status
and warning icon area when appropriate.
Implement position icons show the current position of the hitch-mounted or towed implement. The up arrow indicates that the implement is raised. The down arrow indicates that the implement is lowered. Implement position is determined by the position of the hitch, the position of the Electro-Hydraulic Remote (EHR) 1 lever, or input from the implement status switch.
The Area Control icon flashes whenever the Area ON/OFF window is set to OFF. The operator must turn area control ON to accumulate any area or time data for the current task. The Roading icon displays whenever the operator selects ON in the Road Mode window to indicate the vehicle is roading to or from the field for the task. The icon disappears whenever the selection in the Road Mode window is changed to Off.
Service alert icons inform an operator when scheduled service or maintenance is approaching. The icons count down from 10 hours to 1 hour when a service interval is about to expire. When service is due, the icon changes to a flashing service wrench. See 4-28 for more information on the icons and the service functions within the Large Tractors application.
2-1
9
2 - ICONS AND WINDOWS PERFORMANCE AND VEHICLE
WINDOWS Left-hand area The arrangement of the
windows in the left-hand area can be changed by
the operator. Any single-column window or map
that can be placed on the Run screens or the
Summary Data screens can be placed in the
left-hand area. Refer to the display manual and
its explanation of the Run Layout screen (Home
gt Toolbox gt Layout) to review win- dow placement
in the left-hand area.
RCIL09DSP064BAG 1
2-2
10
2 - ICONS AND WINDOWS "Home" screen The icons on
the Home screen organize the screens for all
farming applications by function. Any
vehicle-specific software can add components to
any function that is represented by these
navigation icons.
RCIL09DSP090BAG 1
Press the Toolbox icon to access screens for
setting display operator preferences, for
customizing the Run screens, for setting up the
GPS receiver, etc. The se- lections vary with the
applications that are installed. The Toolbox
screens provide the location where shared tools
used by other applications can be
configured. Press the Run icon to access the
six user screens for all applications that are
resident on the display. These are the screens
that are normally used while operating the
equipment. NOTE The names for the Run screen
navigation icons cannot be edited. Press the
Diagnostics icon to access screens for check-
ing software revisions, controller status,
specific sensor signals, resource usage, GPS
signal status (if equipped), GPS receiver
interface (if equipped), and for checking and
clearing fault codes. Press the Calibration
icon to access the screens for vehi- cle and
application-specific calibrations such as
distance, area, crop, steering sensor,
etc. Press the Performance icon to access
screens for view- ing the active data set and
analyzing operational results.
Press the Data Management icon to access
screens for importing data, filtering data,
deleting data, and managing map items. Press
the Remote Valves icon to access screens for
con- trolling remote valve flow, timers, and
locks.
2-3
11
2 - ICONS AND WINDOWS Press the Work
Condition icon to access screens for controlling
hitch settings.
Press the Electronic EOR icon to access screens
for working with headland turning sequences.
2-4
12
2 - ICONS AND WINDOWS Performance windows The
performance windows from the Trip Computer and
Precision Farming applications can be placed on
any of the Run or Summary Data screens, or in
the left-hand area as indicated. Refer to the
display manual and its explanation of the Run
Layout screen (Home gt Toolbox gt Layout) to
review window placement. Area control, work
control, and reporting windows The Area ON/OFF,
Work Control, and Road Control windows
determine how all information is gathered on area
and time spent in work and out of work for the
cur- rent task. This information is then used to
calculate fuel economy, power, and productivity.
RAIL12DSP1477BA 1
Area ON/OFF Placement label Area
On/Off Placement location Run screens or
left-hand area The Area ON/OFF window is used
to determine whether area and time are
accumulated for the current task.
Differential GPS (DGPS) spatial data provides
distance and time information. Swath width is
determined by se- lecting an implement to perform
the work. The Area ON/OFF window then
determines whether work data is accumulated for
area and time reporting windows. This window acts
as the master control for whether production data
is accumulated. The Area ON/OFF window has two
settings Off and ON. Press the Area ON/OFF
window to access the pop-up options window.
RAIL12DSP1457AA 2
Press the desired option. When the Area ON/OFF
window is set to Off, area and time data are
not accumulated for the current task. When the
Area ON/OFF window is set to ON, area and
time data is accumulated for the current task.
RAIL12DSP1474AA 3
2-5
13
2 - ICONS AND WINDOWS Work Control Placement
label Work Control Placement location Run
screens or left-hand area With the Area ON/OFF
window set to ON, the Work Control window
determines when area and time are ac- cumulated
for the current task.
The Work Control window operates automatically
based on the input from the hitch position
sensor, the position of the EHR 1 lever, or the
implement status switch. Choose the desired input
in the Implement Type window (Home gt Toolbox gt
Impl). See 3-11 for information about imple- ment
setup.
RAIL12DSP1462AA 4
When the implement is lowered, the Work Control
win- dow will read ON. When the implement is
raised, the Work Control window will read OFF.

• Information is gathered on area and time for the
  current task whenever the tractor is moving and
  one of three conditions is present
• "Hitch Implement" is selected for the implement
  type, and the hitch is down as sensed by the
  standard hitch position sensor
• "EHR 1 Implement" is selected for the implement
  type, and the lever for EHR 1 is in the retract
  or float position
• or the implement status switch, if equipped,
  indicates the implement is down

RAIL12DSP1475AA 5
Although the Work Control window has two
settings ON and Off automatic operation
begins based on the position of the implement,
regardless of the current selection in the
window. With the implement raised, if the Area
ON/OFF window is set to ON and the Work
Control window is set to Off, data
accumulation will begin when the implement is
lowered the first time. With the implement
raised, if the Area ON/OFF win- dow is set to
ON and the Work Control window is set to
ON, data accumulation will begin when the
tractor moves. Automatic operation will begin the
first time the operator lowers and raises the
implement. An operator normally uses the Off
selection to temporar- ily stop data accumulation
while the implement is lowered. The may be
required to cross a non-arable section of the
field or when driving an overlapping pass. Press
the Work Control window to access the pop-up
options window. Press Off in the options window
to tem- porarily stop data accumulation. Press
the window again and press ON to return to
automatic operation.
2-6
14
2 - ICONS AND WINDOWS Road Mode Placement
label Road Mode Placement location Run
screens or left-hand area The gathered
information from the Area ON/OFF and Work
Control windows is further separated into
working time and distance as opposed to roading
time and dis- tance by use of the Road Mode
window.
An operator can use the Road Mode window to
indi- cate when roading occurs for the current
task. The Road Mode window has two settings
ON and Off. Based on this windows setting,
the software tracks the distance and time spent
roading for the current task separately from the
distance and time spent working. Press the Road
Mode window to access the pop-up options window.
Press the desired option. Press ON when the
tractor is roading. An icon displays in the
status and warning icon area to indicate that the
vehicle is roading. Press Off when the tractor
is not roading. The Roading icon no longer
displays in the status and warning icon area.
RAIL12DSP1459AA 6
RAIL12DSP1476AA 7
Remote Valve Lock Placement label Lock rem. n
Placement location Run screens Use the Remote
Valve Lock windows to lock and unlock operation
of individual remote vales as required. See 3-9
for more information.
RCIL11DSP197BAG 8
2-7
15
2 - ICONS AND WINDOWS Remote Valve
Timer Placement label Timer n Placement
location Run screens Use the 2 x 1 Remote
Valve Timer window to set, enable, and disable
extend and retract timer for individual remote
valves as required. See 3-5 for more information.
RCIL11DSP198BAG 9
Area Placement label Area Placement location
Run and Summary Data screens or left-hand
area On the Run screens or left-hand area, this
window re- ports accumulated area in hectares or
acres for the cur- rent task. The area counter is
reset to 0 (zero) when a new task is created or
selected. On the Summary Data screens, this
window reports ac- cumulated area in hectares or
acres for the selected fil- ters crop, tag,
grower, farm, field, and task.
RAIL12DSP1478AA 10
Distance Placement label Distance Placement
location Run screens or left-hand area This
window reports accumulated distance in kilometers
or miles for the current task. The distance is
reset to 0 (zero) when a new task is created.
RAIL12DSP1479AA 11
2-8
16
2 - ICONS AND WINDOWS Distance
Counter Placement label Distance
Counter Placement location Run screens or
left-hand area This window reports accumulated
distance in kilometers or miles for the desired
time interval, e.g. multiple tasks, daily usage,
or weekly usage. The Distance Counter window is
not linked to a particular task. Press the
Distance Counter window to reset the counter. A
confirmation message displays. Press the Yes
button to reset the counter. Press the No
button to continue accumulating distance data.
RAIL12DSP0951BA 12
Distance, Field Placement label Distance,
Field Placement location Run screens or
left-hand area On the Run screens or left-hand
area, this window re- ports accumulated distance
in kilometers or miles for the current task. On
the Summary Data screens, this window reports
ac- cumulated distance in kilometers or miles for
the selected filters crop, tag, grower, farm,
field, and task.
RCIL09DSP009BAG 13
Distance, Work Placement label Distance,
Work Placement location Run and Summary Data
screens or left-hand area On the Run screens or
the left-hand area, this window reports the total
distance spent in work (as opposed to out of
work) for the current task. On the Summary Data
screens, this window reports the total distance
spent in work (as opposed to out of work) for the
selected filters crop, tag, grower, farm, field,
and task.
RCIL09DSP011BAG 14
Distance, Road Placement label Distance,
Road Placement location Run and Summary Data
screens or left-hand area On the Run screens or
the left-hand area, this window reports the total
distance spent out of work (roading dis- tance)
in kilometers or miles for the current task. On
the Summary Data screens, this window reports
the total distance spent out of work (roading
distance) in kilo- meters or miles for the
selected filters crop, tag, grower, farm, field,
and task.
RCIL09DSP010BAG 15
2-9
17
2 - ICONS AND WINDOWS Time, Field Placement
label Time, Field Placement location Run and
Summary Data screens or left-hand area On the
Run screens or the left-hand area, this window
reports the total time spent in hours and minutes
for the current task. On the Summary Data
screens, this window reports the total time spent
in hours and minutes for the selected fil- ters
crop, tag, grower, farm, field, and task.
RCIL09DSP013BAG 16
Time, Work Placement label Time,
Work Placement location Run and Summary Data
screens or left-hand area On the Run screens or
the left-hand area, this window reports the total
time in hours and minutes spent in work (as
opposed to out of work) for the current task. On
the Summary Data screens, this window reports
the total time in hours and minutes spent in work
(as opposed to out of work) for the selected
filters crop, tag, grower, farm, field, and task.
RCIL09DSP014BAG 17
Time, Road Placement label Time,
Road Placement location Run and Summary Data
screens or left-hand area On the Run screens or
the left-hand area, this window reports the total
time in hours and minutes spent out of work
(roading time) for the current task. On the
Summary Data screens, this window reports the
total time in hours and minutes spent out of work
(roading time) for the selected filters crop,
tag, grower, farm, field, and task.
RCIL09DSP012BAG 18
Work Rate Placement label Work Rate Placement
location Run screens or left-hand area The
Work Rate window reports the area worked at
this moment in hectares per hour or acres per
hour for the current task.
RCIL09DSP033BAG 19
2-10
18
2 - ICONS AND WINDOWS Work Rate, Work,
Average Placement label Work Rate, Wrk,
Avg Placement location Run and Summary Data
screens or left-hand area On the Run screens or
the left-hand area, this window reports average
area worked in hectares per hour or acres per
hour for the current task. The window is reset to
0 (zero) whenever a new task is selected.
On the Summary Data screens, this window
reports av- erage area worked in hectares per
hour or acres per hour for the selected filters
crop, tag, grower, farm, field, and task. Work
Rate, Field, Average Placement label Work Rate,
Fld, Avg Placement location Run and Summary
Data screens or left-hand area
RCIL09DSP016BAG 20
On the Run screens or the left-hand area, this
window reports average area, in and out of work,
accumulated in hectares per hour or acres per
hour for the current task. On the Summary Data
screens, this window reports av- erage area, in
and out of work, accumulated in hectares per hour
or acres per hour for the selected filters crop,
tag, grower, farm, field, and task.
RCIL09DSP065BAG 21
Work Speed, Average Placement label Work
Speed, Avg Placement location Run and Summary
Data screens or left-hand area On the Run
screens or the left-hand area, this window
reports average speed while in work in kilometers
per hour or miles per hour for the current
task. On the Summary Data screens, this window
reports av- erage speed while in work for the
selected filters crop, tag, grower, farm, field,
and task.
RCIL09DSP017BAG 22
2-11
19
2 - ICONS AND WINDOWS Fuel usage and economy
reporting windows The area, distance, and time
information is correlated against engine power
and fuel usage input to produce the fuel usage
and economy windows. Fuel/Area Placement label
Fuel/Area Placement location Run screens or
left-hand area This window reports fuel usage in
terms of area liters per hectare or gallons per
acre at this moment for the current task.
RCIL09DSP018BAG 23
Fuel/Area, Field, Average Placement label
Fuel/Area, Fld, Avg Placement location Run and
Summary Data screens or left-hand area On the
Run screens or the left-hand area, this window
reports average fuel usage in terms of area
average liters per hectare or gallons per acre
for the current task. On the Summary Data
screens, this window reports av- erage fuel usage
in terms of area average liters per hectare or
gallons per acre for the selected filters crop,
tag, grower, farm, field, and task.
RCIL09DSP019BAG 24
Fuel/Distance Placement label
Fuel/Dist Placement location Run screens or
left-hand area This window reports fuel usage in
terms of distance kilo- meters per liter or
miles per gallon at this moment for the current
task.
RCIL09DSP020BAG 25
2-12
20
Suggest If the above button click is invalid.
Please download this document first, and then
click the above link to download the complete
manual. Thank you so much for reading
21
2 - ICONS AND WINDOWS Fuel/Distance, Field,
Average Placement label Fuel/Dist, Fld,
Avg Placement location Run and Summary Data
screens or left-hand area On the Run screens or
the left-hand area, this window reports average
fuel usage in terms of distance average
kilometers per liter or miles per gallon for the
current task. On the Summary Data screens, this
window reports av- erage fuel usage in terms of
distance average kilome- ters per liter or
miles per gallon for the selected filters crop,
tag, grower, farm, field, and task.
RCIL09DSP021BAG 26
Fuel Economy Placement label Fuel,
Econ Placement location Run screens or
left-hand area This window reports fuel economy
in terms of power kilo- watt hour per liter or
horsepower hour per gallon at this moment for the
current task.
RCIL09DSP022BAG 27
Fuel Economy, Field, Average Placement label
Fuel, Econ, Fld, Avg Placement location Run
and Summary Data screens or left-hand area On
the Run screens or the left-hand area, this
window reports average fuel economy in terms of
power average kilowatt hours per liter or
horsepower hours per gallon for the current task.
On the Summary Data screens, this window
reports av- erage fuel economy in terms of power
average kilowatt hours per liter or horsepower
hours per gallon for the se- lected filters
crop, tag, grower, farm, field, and
task. Fuel/Hour Placement label
Fuel/Hour Placement location Run screens or
left-hand area
RCIL09DSP023BAG 28
This window reports fuel usage, based on data
from the engine controller, in liters per hour or
gallons per hour at this moment for the current
task.
RCIL09DSP024BAG 29
2-13
22
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com