New Holland TD4020F TD4030F TD4040F Tractor Operator’s Manual Instant Download (Publication No.47518917)

1
OPERATORS MANUAL
ORIGINAL INSTRUCTIONS - according to Directive
2006/42/EC, Annex I 1.7.4.1
TD4020F TD4030F TD4040F Tractor
Part number 47518917 3rd edition English July
2013 Replaces part number 47376836
2
SECTION SUMMARY

• Introduction and safety measures
• General information, controls and instruments
  3 Field Operations
• 4 Lubrication and Maintenance 5
  Troubleshooting
• 6 Vehicle storage 7 Accessories
• Specifications and Data
• First 50Hour Service Forms 10 Alphabetical
  Index

3

• Electro-magnetic Interference (EMC)
• This tractor complies with the European
  Regulations on electro-magnetic emissions.
  However, interference may arise as a result of
  add-on equipment which may not necessarily meet
  the required standards. As such interfer- ence
  can result in serious malfunction of the unit
  and/or create unsafe situations, you must observe
  the following
• Ensure that each piece of non-New Holland
  equipment fitted to the tractor bears the CE mark.

• The maximum power of emission equipment (radio,
  telephones, etc.) must not exceed the limits
  imposed by the national authorities of the
  country where you use the tractor.
• The electro-magnetic field generated by the
  add-on system should not exceed 24 V/m at any
  time and at any location in the proximity of
  electronic components.
• Failure to comply with these rules will render
  the New Holland warranty null and void.

I
4
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.eb
ooklibonline.com
5
CE DECLARATION OF CONFORMITY DOCUMENT
1 On page III is provided copy of the EC
Declaration of Conformity (EC Declaration of
Conformity acc to 2006/42/EC). The EC
Declaration of Conformity is the manufacturers
declaration about equipment compliance to
relevant EU provisions. Please keep the original
document in a safe place. Local authorities may
require you to show this document in order to
assure compliance of your equipment. Translation
of this declaration in your own country language
is provided on the original document
II
6
For your better and easier understanding of the
document you will find original text reproduced
hereafter together with some notes
Clause of 2006/42/EC Annex II EN EC Declaration of Conformity According to Directives 2006/42/EC We, 1 Represented by Giuseppe Gavioli, CNH Europe Holding S.A. 24, Boulevard Royal L2449 Luxembourg declare under our sole responsibility, that the product Agricultural tractor Trade Name 2 Model 3 Type 4 Serial Number 5 to which this declaration relates, fulfills all the relevant provisions of Directives 2006/42/EC amended by 6 For the relevant implementation of the provisions of the Directives, the following (harmonised) standards have been applied ISO 263221 part 1 or 2 Other standards see Operators Manual Place and date of the declaration 7 Name and signature of the authorised person 8
1.A.1 EN EC Declaration of Conformity According to Directives 2006/42/EC We, 1 Represented by Giuseppe Gavioli, CNH Europe Holding S.A. 24, Boulevard Royal L2449 Luxembourg declare under our sole responsibility, that the product Agricultural tractor Trade Name 2 Model 3 Type 4 Serial Number 5 to which this declaration relates, fulfills all the relevant provisions of Directives 2006/42/EC amended by 6 For the relevant implementation of the provisions of the Directives, the following (harmonised) standards have been applied ISO 263221 part 1 or 2 Other standards see Operators Manual Place and date of the declaration 7 Name and signature of the authorised person 8
1.A.2 EN EC Declaration of Conformity According to Directives 2006/42/EC We, 1 Represented by Giuseppe Gavioli, CNH Europe Holding S.A. 24, Boulevard Royal L2449 Luxembourg declare under our sole responsibility, that the product Agricultural tractor Trade Name 2 Model 3 Type 4 Serial Number 5 to which this declaration relates, fulfills all the relevant provisions of Directives 2006/42/EC amended by 6 For the relevant implementation of the provisions of the Directives, the following (harmonised) standards have been applied ISO 263221 part 1 or 2 Other standards see Operators Manual Place and date of the declaration 7 Name and signature of the authorised person 8
1.A.3 EN EC Declaration of Conformity According to Directives 2006/42/EC We, 1 Represented by Giuseppe Gavioli, CNH Europe Holding S.A. 24, Boulevard Royal L2449 Luxembourg declare under our sole responsibility, that the product Agricultural tractor Trade Name 2 Model 3 Type 4 Serial Number 5 to which this declaration relates, fulfills all the relevant provisions of Directives 2006/42/EC amended by 6 For the relevant implementation of the provisions of the Directives, the following (harmonised) standards have been applied ISO 263221 part 1 or 2 Other standards see Operators Manual Place and date of the declaration 7 Name and signature of the authorised person 8
1.A.4 EN EC Declaration of Conformity According to Directives 2006/42/EC We, 1 Represented by Giuseppe Gavioli, CNH Europe Holding S.A. 24, Boulevard Royal L2449 Luxembourg declare under our sole responsibility, that the product Agricultural tractor Trade Name 2 Model 3 Type 4 Serial Number 5 to which this declaration relates, fulfills all the relevant provisions of Directives 2006/42/EC amended by 6 For the relevant implementation of the provisions of the Directives, the following (harmonised) standards have been applied ISO 263221 part 1 or 2 Other standards see Operators Manual Place and date of the declaration 7 Name and signature of the authorised person 8
1.A.7 EN EC Declaration of Conformity According to Directives 2006/42/EC We, 1 Represented by Giuseppe Gavioli, CNH Europe Holding S.A. 24, Boulevard Royal L2449 Luxembourg declare under our sole responsibility, that the product Agricultural tractor Trade Name 2 Model 3 Type 4 Serial Number 5 to which this declaration relates, fulfills all the relevant provisions of Directives 2006/42/EC amended by 6 For the relevant implementation of the provisions of the Directives, the following (harmonised) standards have been applied ISO 263221 part 1 or 2 Other standards see Operators Manual Place and date of the declaration 7 Name and signature of the authorised person 8
1.A.9 EN EC Declaration of Conformity According to Directives 2006/42/EC We, 1 Represented by Giuseppe Gavioli, CNH Europe Holding S.A. 24, Boulevard Royal L2449 Luxembourg declare under our sole responsibility, that the product Agricultural tractor Trade Name 2 Model 3 Type 4 Serial Number 5 to which this declaration relates, fulfills all the relevant provisions of Directives 2006/42/EC amended by 6 For the relevant implementation of the provisions of the Directives, the following (harmonised) standards have been applied ISO 263221 part 1 or 2 Other standards see Operators Manual Place and date of the declaration 7 Name and signature of the authorised person 8
1.A.10 EN EC Declaration of Conformity According to Directives 2006/42/EC We, 1 Represented by Giuseppe Gavioli, CNH Europe Holding S.A. 24, Boulevard Royal L2449 Luxembourg declare under our sole responsibility, that the product Agricultural tractor Trade Name 2 Model 3 Type 4 Serial Number 5 to which this declaration relates, fulfills all the relevant provisions of Directives 2006/42/EC amended by 6 For the relevant implementation of the provisions of the Directives, the following (harmonised) standards have been applied ISO 263221 part 1 or 2 Other standards see Operators Manual Place and date of the declaration 7 Name and signature of the authorised person 8
III
7
(No Transcript)
8
CONTENTS Title Page CE DECLARATION OF CONFORMITY
DOCUMENT . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . I HEALTH AND SAFETY RELATED STANDARDS
APPLIED TO YOUR TRACTOR . . . . . . . . . . . . .
. . . . . . . . . I Section 1 Introduction and
Safety Measures To the owner . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
11 Tractor identification . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 13 Ecology and the
environment . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
14 Safety messages used in this Manual . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 15 Working safely . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 111 Safety
decals . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 126 Safety covers and guards . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
130 International symbols . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 132 Section 2 General
Information, Controls and Instruments Controls
and instruments . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . 22 Instrument panel . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 23 Instrument
console controls . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . 29 Righthand side operating controls . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 210 Lefthand side operating
controls . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 212 Seats . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 215 Transmission with range gear
and shuttle . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 217 Transmission with
creeper and shuttle . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 219 Towing the
tractor . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 225 Loading the tractor onto a
transporter . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 225 Checks before
using the tractor . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
226 Section 3 Field Operations Starting the
engine with thermostart . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
33 Power takeoff . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 35 Hydraulic lift .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 312 Threepoint linkage Cat. II . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 317 Remote control
valves . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
324 Wheel track adjustment . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 326 Tyres . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. 331 Tyre combinations . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 334 Ballasting . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 336 Static weight distribution . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 341
IV
9
Section 4 Lubrication and Maintenance Access
for inspection and maintenance . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
45 Lubrication and maintenance table . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 45 Flexible maintenance . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 48 When the
warning light is on . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. 410 10hour / daily service . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 415 50hour service . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
416 300hour service . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 418 600hour service . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
422 1200hour service . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 424 1200hour or every 2
years service . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 425 General
maintenance . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 430 Electrical system . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
432 Recommendations for bodywork maintenance . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
437 Lubricant capacities and specifications . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 438 Section 5 Troubleshooting Introdu
ction . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 51 Engine . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . 52 Electrical system . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 55 Hydraulic
system . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 56 Three-point linkage . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 57 Brakes
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 58 Section 6 Vehicle
Storage . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
61 Section 7 Accessories Beacon lamp . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. 72 Drawbars and towing attachments . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 75 Hydralic trailer brake . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 710 Section
8 Specifications and Data General Dimensions .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
82 Weights . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 83 Engine
specifications . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 85 Timing . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
86 Fuel system . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 86 Lubrication .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 87 Cooling system . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
87 Transmission . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 87 Power takeoff .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . 88 Hydraulic system . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 88 Three-point
linkage . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 89 Front axle . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
89 Steering . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 810 4WD front
axle . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 810 Brakes . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
811 Bodywork and driving position . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 811 Towing devices . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
811 Electrical system . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 812 Section 9 First
50hour Service Forms . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 91 Section 10
Alphabetical Index . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 101
V
10
METRIC AND IMPERIAL UNITS ABBREVIATIONS
TYPICAL APPLICATIONS RECOMMENDED SI (METRIC) UNITS RECOMMENDED SI (METRIC) UNITS IMPERIAL UNIT IMPERIAL UNIT
TYPICAL APPLICATIONS NAME SYMBOL NAME SYMBOL
AREA AREA AREA AREA AREA
Land area hectare square meter square millimetre ha m2 mm2 acre square foot square inch square inch ha ft2 in2 in2
ELECTRICITY ELECTRICITY ELECTRICITY ELECTRICITY ELECTRICITY
ampere volt microfarad ohm A V ?F ? ampere volt microfarad ohm A V ?F ?
FORCE FORCE FORCE FORCE FORCE
kilonewton Newton kN N pound pound Ib Ib
FORCE PER LENGTH FORCE PER LENGTH FORCE PER LENGTH FORCE PER LENGTH FORCE PER LENGTH
Newton per meter N/m pound per inch Ib/in
FREQUENCY FREQUENCY FREQUENCY FREQUENCY FREQUENCY
megahertz kilohertz hertz MHz kHz Hz Megahertz kilohertz hertz MHz kHz Hz
FREQUENCY ROTATIONAL FREQUENCY ROTATIONAL FREQUENCY ROTATIONAL FREQUENCY ROTATIONAL FREQUENCY ROTATIONAL
revolution per minute r/min rpm revolution per minute r/min (a) rpm
LENGTH LENGTH LENGTH LENGTH LENGTH
kilometer meter centimeter millimeter micrometer km m cm mm ?m mile foot inch inch mi ft in in
MASS MASS MASS MASS MASS
kilogram gram milligram kg g mg pound ounce Ib oz
VI
11
TYPICAL APPLICATIONS RECOMMENDED SI (METRIC) UNITS RECOMMENDED SI (METRIC) UNITS IMPERIAL UNIT IMPERIAL UNIT
TYPICAL APPLICATIONS NAME SYMBOL NAME SYMBOL
POWER POWER POWER POWER POWER
kilowatt watt kilowatt watt kW W horsepower Btu per hour Btu per minute Hp Btu/hr Btu/min
PRESSURE or STRESS (FORCE PER AREA) PRESSURE or STRESS (FORCE PER AREA) PRESSURE or STRESS (FORCE PER AREA) PRESSURE or STRESS (FORCE PER AREA) PRESSURE or STRESS (FORCE PER AREA)
kilopascal kilopascal kPa pound per square inch inch of mercury PSI inHg
pascal pascal Pa inch of water inH2O
megapascal megapascal Mpa pound per square inch PSI
TEMPERATURE (other than THERMODYNAMIC) TEMPERATURE (other than THERMODYNAMIC) TEMPERATURE (other than THERMODYNAMIC) TEMPERATURE (other than THERMODYNAMIC) TEMPERATURE (other than THERMODYNAMIC)
degrees Celcius degrees Celcius ?C degrees Fahrenheit ?F
TIME TIME TIME TIME TIME
hour minute second hour minute second h min s hour minute second h min s
TORQUE (includes BENDING MOMENT, MOMENT OF FORCE, and MOMENT OF A COUPLE) TORQUE (includes BENDING MOMENT, MOMENT OF FORCE, and MOMENT OF A COUPLE) TORQUE (includes BENDING MOMENT, MOMENT OF FORCE, and MOMENT OF A COUPLE) TORQUE (includes BENDING MOMENT, MOMENT OF FORCE, and MOMENT OF A COUPLE) TORQUE (includes BENDING MOMENT, MOMENT OF FORCE, and MOMENT OF A COUPLE)
Newton meter Newton meter N m N m pound foot pound inch Ib ft Ib in
VELOCITY VELOCITY VELOCITY VELOCITY VELOCITY
kilometre per hour kilometre per hour km/h mile per hour mph
meter per second meter per second m/s foot per second ft/s
millimetre per second millimetre per second mm/s inch per second in/s
meter per minute meter per minute m/min foot per minute ft/min
VOLUME (includes CAPACITY) VOLUME (includes CAPACITY) VOLUME (includes CAPACITY) VOLUME (includes CAPACITY) VOLUME (includes CAPACITY)
cubic meter cubic meter m3 cubic yard yd3 cu yd
litre litre l cubic inch in3
litre litre l US gallon UK gallon US quart UK quart US gal UK gal US qt UK qt
millilitre millilitre ml fluid ounce fl oz
VII
12
TYPICAL APPLICATIONS RECOMMENDED SI (METRIC) UNITS RECOMMENDED SI (METRIC) UNITS IMPERIAL UNIT IMPERIAL UNIT
TYPICAL APPLICATIONS NAME SYMBOL NAME SYMBOL
VOLUME PER TIME (includes DISCHARGE and FLOW RATE) VOLUME PER TIME (includes DISCHARGE and FLOW RATE) VOLUME PER TIME (includes DISCHARGE and FLOW RATE) VOLUME PER TIME (includes DISCHARGE and FLOW RATE) VOLUME PER TIME (includes DISCHARGE and FLOW RATE)
cubic meter per minute cubic meter per minute m3/min cubic foot per minute ft3/min
litre per minute litre per minute l/min US gallon per minute US gal/min
millilitre per minute millilitre per minute ml/min UK gallon per minute UK gal/min
SOUND POWER LEVEL and SOUND PRESSURE LEVEL SOUND POWER LEVEL and SOUND PRESSURE LEVEL SOUND POWER LEVEL and SOUND PRESSURE LEVEL SOUND POWER LEVEL and SOUND PRESSURE LEVEL SOUND POWER LEVEL and SOUND PRESSURE LEVEL
decibel decibel dB decibel dB
VIII
13
(No Transcript)
14
SECTION 1 INTRODUCTION AND SAFETY MEASURES
TO THE OWNER
SAFETY
GENERAL
Pages 15 to 125 inclusive list the precautions
to be observed to ensure your safety and the
safety of others. Read the safety precautions
and follow the advice offered before operating
the tractor.
This Manual has been prepared to assist you in
the correct procedure for runningin, driving
and operating and for the maintenance of your
new tractor. Read this Manual carefully. Your
tractor is intended for use in normal and
customary agricultural applications.
FIRST 50 HOUR SERVICE
In Section 9, at the back of this Manual, you
will find the 50hour service reports.
If at any time you require advice concerning your
tractor, do not hesitate to contact your New
Holland dealer. He has factory trained
personnel, genuine manufacturers parts and the
necessary equipment to carry out all your
service requirements.
After you have operated the tractor for 50 hours,
take your tractor, together with this Manual, to
your dealer. He will then perform the factory
recommended 50 hour service and complete the
service report sheets (pages 91 and 93). The
first sheet (page 91) is the dealers copy and
should be removed by the dealer after the
service has been carried out. The second sheet
(page 93) is your copy of the service
performed. Ensure that you and the dealer sign
both copies.
Your tractor has been designed and built to give
maximum performance, economy and ease of
operation under a wide variety of operating
conditions. Prior to delivery, the tractor was
carefully inspected, both at the factory and by
your dealer to ensure that it reaches you in
optimum condition. To maintain this condition
and ensure troublefree operation, it is
important that the routine services, as
specified in Section 4 of this Manual, are
carried out at the recommended intervals.
SERVICE PARTS
It should be pointed out that genuine parts have
been examined and approved by the Company. The
installation and/or use of non-genuine products
could have negative effects upon the design
characteristics of your tractor and thereby
affect its safety. The Company is not liable
for any damage caused by the use of
nongenuine parts and accessories. Only
genuine replacement parts should be used. The
use of non-genuine parts may invalidate legal
approvals associated with this product.
CLEANING THE TRACTOR
Your tractor is a state-of-the-art machine with
user friendly controls. This should be borne in
mind when cleaning the tractor, particularly if
using a high pressure washer. Even though every
precaution has been taken to safeguard
electrical components and connections, the
pressure generated by some of these machines is
such that complete protection against water
ingress can not be guaranteed.
It is prohibited to carry out any modifications
to the tractor unless specifically authorised,
in writing, by the After Sales Service
department of the Company.
WARRANTY
When using a high pressure washer, do not stand
too close to the tractor and avoid directing the
jet at electronic components, electrical
connections, breathers, seals, filler caps, etc.
Never direct a cold water jet at a hot engine or
exhaust.
Your tractor is warranted according to legal
rights in your country and the contractual
agreement with the selling dealer. No warranty
shall, however, apply if the tractor has not
been used, adjusted and maintained according to
the instructions given in the Operators Manual.
11
15

• SECTION 1 INTRODUCTION AND SAFETY MEASURES
• ABOUT THIS MANUAL
• This Manual gives information for use of this
  tractor, as intended and under the conditions
  foreseen by the manufacturer during normal
  operation and routine service and maintenance.
• Normal operation means the use of the tractor for
  the purpose intended by the manufacturer by an
  operator familiar with the tractor and the
  mounted or towed equipment and complying with the
  information for operation and safe practices, as
  specified by the manufacturer in this Manual and
  by the signs on the tractor and the equipment.
• Normal operation includes the preparation and
  storage of the tractor, swinging components into
  work position and vice versa, adding or removing
  ballast and picking up and setting off
  attachments.
• Normal operation includes the adjustment and
  setting of the tractor and equipment, for the
  specific condition of the field and/or the crop.
• Routine service and maintenance means activities
  that must be done daily by an operator familiar
  with the tractor characteristics and complying
  with the information for routine service and safe
  practices, as specified by the manufacturer in
  this Manual and by signs on the tractor, in order
  to maintain its proper function. Routine service
  includes activities such as fuelling, cleaning,
  washing, topping up fluid levels, greasing,
  replacing of consumable articles such as lamp
  bulbs.
• This Manual is not giving all the information
  related to periodical service, converting and
  repairs to be carried out by professional
  service personnel. For some of the latter
  activities, there may be a need for appropriate
  facilities, technical skills and tools which are
  not supplied with the tractor, please refer to
  your dealer or authorised workshop.
• Periodical service means activities that must be
  done at defined intervals by trained personnel
  familiar with the tractor characteristics and
  which are complying with the information for
  periodical service and safe practices, as partly
  specified by the manufacturer in this Manual and
  in other Company literature, in order to
  maintain the expected life time of the tractor.
• Converting means activities that must be done by
  professional service personnel familiar with the
  tractor characteristics and complying with the
  information for converting, as partly specified
  by the manufacturer in this Manual, in assembly
  instructions or in other Company literature, in
  order to fit the tractor to a specific
  configuration.
• Repair means activities that must be done by
  professional service personnel only familiar with
  the tractor characteristics and complying with
  the information for repair, as specified by the
  manufacturer in the dealers Workshop Manual, in
  order to restore the proper function of the
  tractor after a failure or degradation of
  performance.

12
16
SECTION 1 INTRODUCTION AND SAFETY
MEASURES TRACTOR IDENTIFICATION PLATES Serial
numbers identify the tractor and its main
components. The identification data must be
supplied by the dealer for requests for spare
parts or service operations. Identification data
is of fundamental importance in the event of
theft of the tractor. The location of the various
identification data is shown below. Tractor
frame number identification data plate (stamped
on the axle support ) Frame identification
data plate. Engine identification data plate
(stamped on engine body).
Frame identification data plate The Product
Identification Number plate provides important
information on tractor and towed equipment
weight combinations. This plate can be found on
the lefthand side of the rops support. The
figures shown are the maximum permissible
vehicle and towing weights and should not be
exceeded, to do so may affect the safe operation
of the tractor. See Drawbars and Towing
Attachments in Section 7.
13
17
SECTION 1 INTRODUCTION AND SAFETY
MEASURES ECOLOGY AND THE ENVIRONMENT
Soil, air and water are vital factors of
agriculture and life in general. Where
legislation does not yet rule the treatment of
some of the substances which are required by
advanced technology, common sense should govern
the use and disposal of products of a chemical
and petrochemical nature.
3. Modern oils contain additives. Do not burn
contaminated fuels and/or waste oils in ordinary
heating systems.
4. Avoid spillage when transferring used engine
cooling liquids, engine and transmission
lubricants, hydraulic oils, brake fluids, etc..
Never mix used brake oil with fuel oil, or fuel
oil with lubricants. Store safely until suitable
disposal can be arranged according to national
legislation or local regulations.
The following are recommendations which may be of
assistance

• Become acquainted with and ensure that you
  understand the relative legislation applicable to
  your country.

5. Modern antifreeze liquids and solutions, e.g.
antifreeze and other additives, must bereplaced
every two years. They must not be left to be
absorbed into the ground, but must be collected
and disposed of in a suitable manner.

• Ask your suppliers of lubricants, oils, fuels,
  antifreeze, detergents, etc.. for information on
  the effects of these products on humans and the
  environment and for instructions concerning
  their use, storage and disposal. In many cases,
  local agricultural consultants will be able to
  provide assistance.

6. Repair any leaks or defects in the engine
cooling or hydraulic system immediately.
7. Do not increase the pressure in a pressurised
circuit as this may lead to the components
exploding.
HELPFUL HINTS
8. Protect hoses during welding as penetrating
weld splatter may burn a hole or weaken them,
causing the loss of oils, coolant, etc.
1. Avoid filling tanks using unsuitable
containers or inappropriate pressurised fuel
delivery systems which may cause considerable
spillage.
9. Do not adjust the setting of the fuel delivery
system as this will alter the emission of
exhaust fumes.
2. In general, avoid skin contact with all fuels,
oils, acids, solvents, etc. Most of them contain
substances which can be harmful to your health.
NOTE The engines installed on the tractors
comply with antipollution legislation.
14
18
SECTION 1 INTRODUCTION AND SAFETY MEASURES
SAFETY MESSAGES USED IN THIS MANUAL
This warning symbol points out important
messages concerning your safety.
IMPORTANT WARNINGS The machine is designed and
produced exclusively for agricultural use.
All other use will be considered to be contrary
to the use specified by NEW HOLLAND, who can not
be held liable for damage to property or the
machine, or for personal injuries which may
result.
Read the following safety regulations carefully
and follow the recommendations in order to avoid
potential hazards and safeguard your health and
safety. In this Manual the symbol is accompanied
by the following keywords
Persons who risk improper use will therefore
assume the responsibility for any consequences
arising from such use.
DANGER
Compliance with the instructions for use,
maintenance and repairs described in this Manual,
are the essential preconditions for the use
specified by NEW HOLLAND.
Indicates an immediate hazardous sitaution, that,
if not avoided, will result in death or serious
injury.
WARNING Indicates a potential hazardous
situation that, if not avoided, could result in
serious injury.
The tractor must only be used, serviced or
repaired by personnel trained in the relevant
working methods and safety regulations and who
have been authorised to work on the tractor.
CAUTION Indicates a potential hazardous
situation that, if not avoided, may result in
minor injury or machine damage. This can also be
used to alert against unsafe practices.
The user must also observe the rules concerning
general safety and accident prevention, including
the Highway Code when driving on public highways.
Any arbitrary modifications made to this tractor
will release NEW HOLLAND from any liability
resulting from damage or injury.
Failure to observe the instructions preceded by
the aforementioned key words may result in
severe or fatal injury to the persons
involved. Furthermore, this Manual also contains
instructions preceded by the terms NOTE and
IMPORTANT, with the following relevance in
relation to machine protection
NEW HOLLAND and all its distribution
organisations, inclusive of, but not restricted
to, national, regional or local distributors,
can not be
held liable for damage resulting from the
malfunction of parts and/or components not
approved by NEW HOLLAND.
IMPORTANT This is used to higlight important
information for machine usage or specific
procedures to prevent minor machine damages.
Under no circumstances will a guarantee be issued
for products made or sold by NEW HOLLAND that
are damaged as a result of the malfunction of
parts
NOTE This is used to identify and present
supplementariy informations.
and/or components not approved by
NEW HOLLAND.
15
19
SECTION 1 INTRODUCTION AND SAFETY MEASURES
Commission Directive 2010/52/EU Aspects
concerning safety of directive 2010/52/EU H.
Support and maintenence.
Section 4.1
DANGER Improper operation or service of this
tractor can result in an accident. Do not
operate this tractor or perform any
lubrication, maintenance, or repair on it until
you have read and understood the operation,
lubrication, maintenance, and repair
information. Failure to comply will result in
death or serious injury.

• Ergonomic position of the seat.
• Regulate the driver seat correctly in the most
  comfortable, ergonomic position before using the
  tractor. This reduces the risks and effects of
  the vibrations transmitted to the whole body.
  Please refer to pages 215, 216 for specific
  adjustment instructions. See page 134 for
  further information on the effects and risks of
  vibration transmitted to the whole body.
• Heating, ventilation and airconditioning
• (Not Available)
• Starting and shutting down the engine.
• To be able to use the tractor safely, it is
  recommended to read and fully understand all the
  information on engine startup and shutdown and
  likewise safety for use and operation. Please
  refer to page 32, 33 and page 34.

DANGER Improper operation or service of this
tractor can result in an accident. Any
unauthorized modifications made to this
tractor can have serious consequences. Consult an
authorized dealer on changes, additions, or
modifications that may be required for this
tractor. Do not make any unauthorized
modifications. Failure to comply will result in
death or serious injury.
WARNING Improper operation or service of this
tractor can result in an accident. Read and
understand the SAFETY INFORMATION Section before
you perform any maintenance, service, or
repairs. Read and understand the specific
service procedures for the components you plan to
work with before you start servicing the
tractor. Failure to comply could result in death
or serious injury.
D. Emergency exit (Not Available) E. Getting on
and off the tractor. WARNING Fall hazard! Jumping
on or off the tractor could cause an injury.
Always face the tractor, use the handrails and
steps, and get on or off slowly. Maintain a
threepoint contact to avoid falling both hands
on the handrails and one foot on the step, or
one hand on the handrail and both feet on the
steps. Failure to comply could result in death
or serious injury. See page 123
WARNING Improper operation or service of this
tractor can result in an accident. If you do not
understand a maintenance procedure, or doubt your
ability to perform a maintenance procedure
correctly, see your authorized dealer. Failure to
comply could result in death or serious injury.
F. Articulated tractors. (Not Available) G.
Special Tools. No special tools are required for
using or servicing the tractor. For support and
maintenance work and services not contemplated
in this manual, please
WARNING Personal Protective Equipment (PPE)
required. When assembling, operating, or
servicing the tractor, wear protective clothing
and PPE necessary for the particular procedure.
Some PPE that may be necessary includes
protective shoes, eye and/or face protection,
hard hat, heavy gloves, filter mask, and hearing
protection. Failure to comply could result in
death or serious injury.
contact your dealer NEW HOLLAND
AGRICULTURE.
16
20
Suggest If the above button click is invalid.
Please download this document first, and then
click the above link to download the complete
manual. Thank you so much for reading
21
SECTION 1 INTRODUCTION AND SAFETY MEASURES

• WARNING
• Battery acid causes burns. Batteries contain
  sulfuric acid.
• Avoid contact with skin, eyes or clothing.
  Antidote
• (external) Flush with water. Antidote (eyes)
  flush with water for 15 minutes and seek medical
  attention immediately. Antidote (internal)
  Drink large quantities of water or milk. Do not
  induce vomiting. Seek medical attention
  immediately.
• Failure to comply could result in death or
  serious
• injury.
• WARNING
• Fire hazard!
• When handling diesel fuel, observe the following
  precautions
• Do not smoke.
• Never fill the tank when the engine is running.
• Wipe up spilled fuel immediately.
• Failure to comply could result in death or
  serious injury.
• WARNING

I. Hydraulic Hoses
Although periodical inspection of the hydraulic
hoses is required, it is not necessary for the
operator to carry out maintenance work. Please
refer to the general precautions to be observed
for tests and
(chapter on
inspections given in this manual lubrication and
maintenance). J. Towing the tractor WARNING Avoid
injury!
Incorrect towing procedures can cause accidents.
When towing your machine, follow the procedure in
this manual. Failure to comply could result in
death or serious injury. Please refer to page
225.
K. Hoisting Point The points to use for hoisting
the machine are shown on page 121.
Fire hazard! Do not add gasoline, alcohol, or
blended fuels to diesel fuel, except as
recommended in this manual. Fuel combinations
may increase fire and explosion hazards. Failure
to comply could result in death or serious
injury. WARNING
L. Batteries and fuel tank Observe all the
following precautions. Please refer to page 432
for the specific maintenance operations on the
battery. Please refer to page 42 for
instructions on filling.
WARNING Explosive gas! Batteries emit explosive
hydrogen gas and other fumes while charging.
Ventilate the charging area. Keep the battery
away from sparks, open flames, and other
ignition sources. Never charge a frozen
battery. Failure to comply could result in death
or serious injury. WARNING Battery gas can
explode! To prevent an explosion 1. Always
disconnect the negative () battery cable first.
2. Always connect the negative () battery cable
last. 3. Do not short circuit the battery posts
with metal objects. 4. Do not weld, grind, or
smoke near a battery. Failure to comply could
result in death or serious injury.
Fuel vapors are explosive and flammable. Do not
smoke while handling fuel. Keep fuel away from
flames or sparks. Shut off engine and remove
key before servicing. Always work in a
wellventilated area. Clean up spilled fuel
immediately.
Failure to comply could result in death or
serious injury.
M. Danger of Overturning Do not use the tractor
on slopes or in such conditions as to compromise
its limits of safety and stability, indicated in
118 Using the tractor beyond these limits may
result in a roll over or a tip over. Observe
the recommendations in this manual. Pay
particular attention when coming down steep
slopes with a loaded tractor. Do not drive the
tractor on or near the edge of ditches, canals,
dykes or embankments with ground that is
unstable or dug out by rodents. The tractor may
sink sideways and roll over.
17
22
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.eb
ooklibonline.com