Case IH 440 & 441 Wheel Tractor Operator’s Manual Instant Download (Publication No.9-9024) - PowerPoint PPT Presentation

About This Presentation
Title:

Case IH 440 & 441 Wheel Tractor Operator’s Manual Instant Download (Publication No.9-9024)

Description:

Case IH 440 & 441 Wheel Tractor Operator’s Manual Instant Download (Publication No.9-9024) – PowerPoint PPT presentation

Number of Views:0
Date added: 10 September 2024
Slides: 23
Provided by: kkdmzxoisokdkm
Category:
Tags:

less

Transcript and Presenter's Notes

Title: Case IH 440 & 441 Wheel Tractor Operator’s Manual Instant Download (Publication No.9-9024)


1
440 441 Wheel Tractor Operators Manual
9-9024 epr ted
2
THIS SAFETY ALERT SYMBOL INDICATES IMPORTANT
SAFETY MESSAGES IN THIS MANUAL. WHEN YOU SEE THIS
SYMBOL, CAREFULL Y READ THE MESSAGE THAT FOLLOWS
AND BE ALERT TO THE POSSIBILITY OF PERSONAL
INJURY OR DE H B
If Safety Decals on this machine use the words
Danger, Warning or Caution, which are defined as
follows 0 DANGER Indicates an immediate
hazardous situation which if not avoided, will
result in death or serious injury. The color
associated with Danger is RED. 0 WARNING
Indicates an potentially hazardous situation
which if not avoided, will result in serious
injury. The color associated with Warning is
ORANGE. 0 CAUTION Indicates an potentially
hazardous situation which if not avoided, may
result in minor or moderate injury. It may also
be used to alert against unsafe practices. The
color associated with Caution is YELLOW. If
Safety Decals on this machine are ISO two panel
Pictorial, decals are defined as follows G The
first panel indicates the nature of the hazard. G
The second panel indicates the appropriate
avoidance of the hazard. G Background color is
YELLOW.
G Prohibition symbols such as
and if used, are RED.
X
WA I IMPROPER OPERATION OF THIS MACH INE CAN
CAUSE INJU RY OR DEATH. BEFORE USING THIS
MACHINE, MAKE CERTAIN THAT EVERY OPERATOR 0 Is
instructed in safe and proper use of the
machine. G Reads and understands the Manual(s)
pertaining to the machine. G Reads and
understands ALL Safety Decals on the machine. 0
Clears the area of other persons. 0 Learns and
practices safe use of machine controls in a safe,
clear area before operating this machine on a job
site. It is your responsibility to observe
pertinent laws and regulations and follow Case
Corporation instructions on machine operation and
maintenance.
Bur 0-00000 March, 1995 (Revised October, 1997)
2001 Case Corporation
CASE and IH are registered trade marks of Case
Corporation
3
(No Transcript)
4
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com
5
(No Transcript)
6
TRIP-L RAN GE-DUAL RANGE SHUTTLE
7
NOTEGE! At the time your Case Dealer delivers
your new tractor, he will acquaint you with its
operation and maintenance as outlined in the
Dealer's Delivery Service Report. When your
Dealer has completed these instructions, he will
ask you to si9u the report and will then hand you
the yellow copy for your records. NOTI The
Dealer's Delivery Service Report also
contains a xecord of the Pre-Delivery Checkup
which your Dealer made on your tractor.
Tke Autkoztxed Case Dealer 6om wbom yon
purchased youz new tractor will pezfozm tke
"After Delivery Cbeckup outlizted oa tke fol-
lowing page, if you will arraztge to brfog pouz
tractor to kbs Service Sbop wttBlo - - - 60 daya
after date of delivery oz 200 bouzs of operation
(wktckeyer occurs 6rat). NO'B T1te oiIp
cbazge pouz dea1ez wtil zztake lor tbts
iospecttoa wtll be lor oil, fi1teza or otker
acceasoztea.
8
A''zR DîZVzæV CaBCRAP g aek Z szîtsozz
''zactoxs
Gheck foot clutch. ri Check hond clutch (il
uaed). Check ahutüe action (il uaed). Cbeck
brakes. Operate Eagte îïitcb hydru1ic aystem ond
cbeck oil iesel in torque tube. Check bre
preasure. Tighten cylinder head and
ndjUB tappets. Ckeck dîstrîbutor tîmîztg.
_at_ Croakcoae oü (Cboage oil oad Citer if
aeceaeay). D Oî1 iesel îa tzœæozîeaioa oad
tortue tube. _at_ ubricate all preaauze Ôttîoga oad
oü cupæ Q Check oir cleaner.
_at_ Cbeck steezîog. beœîog adjuat- æent oad koot
æbeel toe-
Battery. atœter. geoerotor œtd
Gheck spork pluga ctnd distributor
fi
Check JtM goeeroed no load eztgizte speed.
_at_ Cbeck operation oJ alt îoetru- æeotæ
DEAER Questiozz purchaser carefully coocero?ag
bye expezieace witk tractor ood ozzswer
ooy.questiooa coztcexolog znoloteooace or
operation tbat one not cleaz to biza. Checkup
'
9
(No Transcript)
10
za zxwzav cæacaæ (Bpazk Zgzzîtsoa ''àactoxc)
Check loot ctutch. Clteck boad clutclt (iJ uaed).
_at_ 3'igbtea oil boîta (îoctudîag zJœa). gyttg
gygtg .
Operote Eog Hitcb b dgguic syeteæ œtd cbeck
oi! le 'et io torque tube. Cbecl 'bre
preaaure. 3'igbtea cytîader bead oad adjuat
Oü e''eÎ ÎD t 'œæaÎeæoO DgSd ! O _at_
ubzicate all preaeuze Ôttîaga aod oil cupæ
Cg y
), e/.
_at_ Cbeck steezfag. beorîog odjuat- ozeot aod 6oizt
æbeel toe-
Cbeck dîabîbutor tîzaîog.
D Battery. stœter. geaerator osd
Cbeck apazÎt pluga oaü dîabtbutor
Check fulÏ goeeroed ao Road eogioe speed.
_at_ Cbeck operaÑoo ol all ioabu- æeota.
DEAIZS Queaboa purclxoaer cozelutly coocexotag
k?a experience witk tractor QtcI a2Bwe' ta/
que8tZob8 coo0exofog tQfDtetQtce or operatfoa
tkot oze oot clear to kbzt Gbeckup ...
.............. ............................. .
11
(No Transcript)
12
To the Purchaser of a Case Tractor, The care you
give your new Cose trctctor will greatly
determine the sotislnciion end service like
you will obtoin from i1. Use this monunl us your
guide. By ob- serving the instructions cmd
suggestions in this manual, your Case tractor
will serve you well for mnny yeors. As on
Authorized Cose Deoler we stock Genuine Cose
Parts, which ore mcinufoNured with the some pre-
cision end skill us the original equipment. Our
factory trciined staff is kept well informed on
the best methods of servicing Cose equipment end
is rectdy end able to help you. Should you
require ndditionol cñd or information, contact
us. Your Authorized Cose Deoler
T.o iHSure efficient and prompt service, please
furnish us with the Model' and Serial Number of
your ir ictor and Serial Number of your engine,
in awal correspondence or contacts.
13
TABLE OF CONTENT .. .........................
...... ...........................................
..................................................
.... .....
Page 6 Ü IleFä QBCiÖCäÜOflS .....................
..................................................
..................................................
........... 7- U
SAFfRl Ï ÏUmberS
Operating Instructions ..............
....................... .........................
.................. . 29- 74 Pre-Startlng Check
Llst ......... . .........................
..................................................
.............._..... 30 Operating Controls and
Instruments .... ....... .........
..............................................
32- 34 Run-In Procedure ..........................
-.................................................
..... .............. ..................-...
35 Engine Stamng Procedure .......................
..................................................
..................................... 36-
37 Stoppings the Engine ... .. ..
..................................................
........ 37 Drerential Brakes
........................-..................
............. ....................................
..... 35 fl3l-RiH2gi DRIVE
..................................................
..................... ............
......................................_...._
4(I- 41 Dual-Range Shuttle .......................
.............. .. ..... ..........................
............................ 42 Eagle Hitch and
Hydraulics System ...............................
............... ..................................
. 43- 4S Three-Point Hitch (with Swinging Draft
Arms)...................... .. ............
........... 45 Remote (Portable) Cylinder
Attachment........................................
.................................. 50- 51 Rear
Wheel Spacing ......... ..........................
..................................................
............ 52- 54 Power Adjusted Wheels
..................................................
..................................................
........... 55- 56 Front Wheel Spacing
..................... . ..........................
......................... 57- 58 Belt Pulley
Attachment .......................................
..................................................
................... ...... 59- 61 JOD SUn t
RUf1nfng . . . .................................
... .... .........................................
.................. .......... 6Ü- P.T.O. Output
Shaft.............................................
..................................................
.............. ...... - 60 Drawbar ...............
..................................................
.... .............................................
........................ 66 TräCtOr
ACCESSOIRES .....................................
........................._........................
_...................................... 6Ä- Cold
Weather Operation ..............................-.
.......................... .......................
.... ... ........ 69- 70 lul tOFäge
............... .... .............................
..............................................
........... ............... ................. 7Ï I
mportant Cheeks During Operation
...............................-....-.............
............................... 72- 73 SERVICE
UggeStiOf1S .................... .........
.................. .............
.................................... ..........
....-..... .... .. 7 - 8 Preventive
maintenance .....................................
..................................................
.................................... 83-109 lJyg
ySÈeIy .............. .........................
................. ...............................
..................... ................ ... 4
89 Fue1 and Fuel System ...............
...-..............................................
...... ...........................................
... 91- 93 Governor and Engine Speed
.....................-..........-.......-......-..
..................................._............
94 dVe ACjUStIMeIlt..........................
..................................................
.............................................-..-
/ Ignition and Electrical Equipment
..................................................
.......................... ........ 97-103 Front
Wheel Bearings ........-..........................
.............................-....................
.............. .... .... -.--- III Flywheel
Clutch and Pedal Linkage ........-.............-..
..-...............................................
........ 105 Diirential Brakes and Adjustment
....................--................
......................................... 106 Tr
COF tOF ge .,.....................
......................_.... ....
............................ ...._........
........................... ... Ü- Ü Index,
Alphabetical -..................................
........-.........................................
. .................109-110 warranty
............._..._........_.......................
....._....... ............ ..... ...... .....
..... ............ . ..............-- .-. 1
14
0
fo
- keel ftjjj y tc
y
0
deî
C l '
15
Case Model 441 General PUrpose Øual Front End
Case Model 441 Ceneral Purpose 4
  • Adj. Front Axle

16
  • INTRODUCTION
  • Here's just a few outstanding features of the
    Case 440-441 Model Tractors
  • "POWR-TOiiQ ENCINE. A high-compression,
    heavy-duty 148 cubic inch with an extremely high
    torque. What's more it operates on regular grade
    gasoline. Spin on full-flow oil filter.
  • HEAVYDUTY CLUTCH. New clutch design with 505
    more torque-carry- ing capacity. Smooth,
    long-life operation.
  • SPEED CONTROL. All-Speed friction type hand
    throttle with finger tip,
  • nger-ease control.
  • CAM AND LEVER STEERING. Smooth-as-silk,
    shockproof steering for ac- curate, instant
    control of front wheels. Power steering
    attachment available for either utility or
    general purpose tractors.
  • DIFFERENTIAL BRAKES. High-capacity 6-inch
    double-disk, velvet touch, brakes. Simple to
    adjust, a breeze to service.
  • HEAVY-DUTY TRANSMISSION. Standard (4) speed
    transmission provides speeds of 2.7, 4.0, 5.2,
    12.9 m.p.h. forward, and a speed of 3.2 m.p.h. in
    reverse. A special high speed road .gear is also
    available as a factory installed extra.
  • TWELVE-SPEED TRIPLRANGE DRIVE (ESTRA). This
    remarkable
  • power train provides forward speeds from 1.6 to
    21.5 m.p.h. and reverse speeds from 1.9 to 5.4
    m.p.h. (see page 11).
  • 6. DUAL-RANGE SHUTTLE ( ESTRA ). Provides ( 8)
    speeds forward and (8) speeds in reverse.
    Provides faster working cycles when using a
    front end loader since reverse speeds are 25
    faster than forward, in any gear. (see page 11).
  • CONST.4h'T-RUNNING POWER TAKE-OFF (EXTRA ). This
    is a straight-
  • line power shaft from engine to rear shifter
    fork. In use, it allows the rear wheels to be
    stopped, while the P.T.O. shaft rotation remains
    at normal speed.
  • E.GLE-HITCH ( EXTRA ). Improved, enclosed,
    streamlined, assembly with quick, simple
    implement attaching points. Handier than ever,
    more compact, more lifting power, greater ease of
    operation. And for your safety a built-in
    hydraulic interlock to prevent accidental
    dropping of mounted tools. Double control and
    remote cylinder system can easily be attached at
    any time.
  • THREE-POINT HITCH ( Swinging Draft Arms ) (EXTRA
    ). This is an optional hitch which will
    accommodate rear-mounted tools other than Case.
    This hitch is actuated and controlled by the same
    hydraulic system as the Eagle Hitch linkage.
  • SAFETY STARTING. Combination of ignition
    switch and transmission safety switch.
  • CHOICE OF SfODELS. 1. A low-silhouette Model
    440 utility tractor with a solid front axle. 2.
    A standard general purpose hlodel 411 with dual
    front wheels. This model is also available with
    an adjustable front axle as extra equipment.

17
TRACTOR SERIAL NUMBERS When ordering parts from
your Authorized Case Dealer, always specify the
Serial Number and Model of your Tractor. As a
means of ready reference fill in the serial
numbers along with the model number of your
tractor, in the spaces provided here.
When ordering Tractor Parts, specify the Tractor
model and Serial Number, located on the tractor
dash.
Use the Engine Serial Number, stamped on the
right side of the engine block, when ordering En-
gine Parts.
T C M P E R AT U RE G A G E
ENGINE SERIAL NUMBE R
T R AG T OR SE R I A L NUMB E R Fig. 1. Tractor
Number Fig. 2. Engine Number The information
compiled in this man ual covers the operation and
preventive maintenance on the Case 440-441
Tractors. It is our hope that this manual will
help you to understand the correct care and use
of this tractor. If you should require additional
information or services of a trained mechanic, be
sure to see your authorized CASE DEALER. NOTE
The terms Right Hand and Left Hand whenever
used in this manual apply to the tractor when
facing in the direction the tractor will move in
forward operation. 6
18
(No Transcript)
19
GENERAL SPECIFICATIONS Engine ( Gasoline)
GENERAL Fotir Cylinder Overhead Valve 1 3 4
2 3'/ 4' 148 cubic inches 7.1 to 1
Type Firing Order Cylinder Bore Stroke Piston
Displacement Compression natio
Replaceable Positive Type .014 ( cold) \'et
neplaceable Type Oil Bath Type 1750 R.P.M. 1925
R.P.II. 500 R.P.II. Case Sensitive Flyweight
Combination Friction Type Hand Control and Foot
Control PISTONS AhD RODS
Valve Citiides
Exhaust Valve Rotators
Valve Clearance Cylinder Sleeves Air Cleaner Full
Load Engine Speed No Load Engine Speed Engine
Idling Speed Governor Type Engine Speed Control
Rings Per Piston Number of Compression Rings
humber of Oil Rings Piston Pins Connecting Rod
Bearings
3 1 Full Floating Precision Insert Type
M.PIN BEARINGS
Number of Bearings Type of Bearings
3 Precision Insert Type
ENGINE LUBflIC.4TION SYSTEM 14-20 lbs. (at 1750
R.P.S'I. ) Gear Type with Floating Intake Full
Flowneplaceable cartridge element FUEL SYSTEM 1
S.A.E. Flange In Sediment Bowl Under Tank COOLING
SYSTEM
Oil Pressure Oil Pump Oil Filter
Carburetor Fuel Strainer
Pressurized System with 4 lb. Pressure Cap
Gladiator Temperature Control Fan \'.ater Pump
Tube and Fin Construction Thermostat 16 Four
Blade, Belt Driven Sealed, Pre-lubricated Bearings
8
20
Suggest If the above button click is invalid.
Please download this document first, and then
click the above link to download the complete
manual. Thank you so much for reading
21
ELECTRICAL .AND IGNITION SYSTEM Ignition
Switch . Key Locking Type Battery ( dry charge
type ) 12 Volt, 50 Amp. Hr. Positive Post
Grounded Spark Plugs Champion D 16 AC-86 Comm.
or equlvalent . Thread 18 mm.
Cap .025 . Automatic Advance 26 Point Gap
.020 \Vith Voltage Regulator
Distributor Generator ( 3-brush type ) Third
brush not adjustable .
Starting Motor Head Lights Rear Light
iVith Sealed Starter Drive
12 Volt, Sealed Beam Units 12 Volt, Combination
Tail and Flood with Electrical Outlet
for Safety Light Attachment 20 Amp. in Light
Circuit
Fuse ( Dash LOCation)
FLYWHEEL CLUTCH (FOOT OPERATED)
Type ( Std. 4-Speed or Trips-Range ) Type ( Dual
Range Shuttle ) Throw-Out Bearing
Single Plate, Dry Disk, ( 9!i dia. ) Single
Plate, Dry l9isk, ( 11 dia. ) Sealed, Ball-Thrust
STANDARD TRANSMISSION (4) Forward ( 1 ) ileverse
tHigh Speed 4th Gear ( Optional
Equipment) TRIPL-RANGE DRIVE (OPTION.AL
) Provides ( 12) Speeds Forward, and ( 3) Speeds
Reverse IDUAL RANGE SHUTTLE (OPTIONAL - ABILITY
ONLY) . Provides ( 8) Speeds Forward and ( 8)
Speeds Reverse with High
Speeds
Speeds
Speeds
Speed 4th Gear and Heavy Duty Clutch
( Cannot be used with Constant-Running P.T.O.,
Tripl-Range or Belt Pulley) BRAKES
Type Pedals
Heavy Duty. 6-inch Double Disk Differential
Brakes Can Be Locked Together or Operated
Independently Pedal Catch for Parking or Belt
Work STEERING GE.OR AND FltONT AXLES
Steering Gear Type Front Axle Type ....
.. . Cam and Lever gear with center-line control
SIode1 441 Tractors Dua1 or .Adjustable Front
Axles Model 440 Utility Tractors, Fixed Front Axle
STANDARD POWER TAKEOFF (OPTIONAL ) Standard
1 A.S.A.E.
Output Shaft Rotation
. Clockwise ( from rear )
Speed
533 R.P.II. ( at 1750 R.P.M. engine speed )
method of Engagement . . .. . Hand Shift Rod at
Rear of Tractor
Height from Drawbar to Centerline of P.T.O. Shaft
tFactory Installation Only
10
22
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com
Write a Comment
User Comments (0)
About PowerShow.com