Case IH AFS Pro600 AFS Pro700 AFS Field Performer Large Tractors Trip Computer Operator’s Manual Instant Download (Publication No.47369333)

1
AFS Pro 600 AFS Pro 700 AFS Field Performer
Large Tractors Trip Computer SOFTWARE OPERATING
GUIDE Software Version 27.
Part number 47369333 1st edition English June 2012
2
Contents

• GENERAL
• Manual scope. . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . 1-1
• ICONS AND WINDOWS VEHICLE ICONS
• Status and warning icons. . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  2-1
• PERFORMANCE AND VEHICLE WINDOWS
• Left-hand area . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . 2-2
• Performance windows . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . 2-3
• Vehicle and framework windows . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . 2-17
• SETUP
• REMOTE VALVES
• Variable flow controls . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . 3-1
• Remote valve timers. . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . 3-5
• Valve locks. . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . 3-9
• IMPLEMENTS AND THE HITCH NOTEBOOK

3
Playing a sequence. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . 4-26 Managing sequences. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 4-28 SERVICE REMINDERS Maintenance
schedule . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
4-29 Service reminder operation. . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. 4-33 Sharing the display between vehicles . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 4-37
4
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.eb
ooklibonline.com
5
(No Transcript)
6
1 - GENERAL 1 - GENERAL Manual scope This manual
covers the AFS Field Performer functions for the
large tractor application. The manual assumes
that you have read and understood the contents
of the display manual in preparation for this
manual. Your manuals have changed to a layered
approach to match the layered architecture in
your new farming soft- ware. Each manual builds
on the knowledge learned in the previous manual
the display manual is required read- ing for
this application manual. This application manual
is organized as follows
Chapter 2 explains the control and reporting win-
dows available from the Field Performer
application for monitoring productivity and
performance during crop production. Chapter 3
explains how to use software features for the
remote valves, rear hitch, Automatic Productivity
Management (APM) and auto-PTO. Chapter 4
explains how to use the Field Performer
application to monitor productivity and
performance how to use the electronic End of
Row (EOR) sys- tem and how to use the service
and maintenance features.



1-1
7
1 - GENERAL
1-2
8
2 - ICONS AND WINDOWS
2 - ICONS AND WINDOWS VEHICLE ICONS
Status and warning icons The left hand area is
visible on all screens and is split into three
areas for your tractor
the status icon area (1), the horizontal sequence
bar used with the electronic End Of Row (EOR)
system (2). See 4-18 for infor- mation on this
feature, and the window area providing operator
selected performance information, productivity
information or maps (3).


RCIL09DSP064BAG 1
Six status icons are specific to the large
tractor application and display in the status
area when appropriate.
Implement position icons show the current position of the hitch-mounted or towed implement. The up arrow indicates the implement is raised. The down arrow indicates the implement is lowered. Implement position is determined by the position of the hitch, the position of the EHR 1 lever or by input from the implement status switch.
This area control icon flashes whenever the Area Control ON/OFF window is set to off. The operator must turn area control on to accumulate any area or time data for the current task. The roading icon displays whenever the operator selects on in the Road Mode window to indicate the vehicle is roading to or from the field for the task. The icon disappears whenever the selection in the Road Mode window is changed to off.
Service alert icons inform an operator when scheduled service or maintenance is approaching. The icons count down from 10 hours to 1 hour when a service interval is about to expire. When service is due, the icon changes to a flashing service wrench. See 4-29 for more information on the icons and the maintenance functions within the large tractor application.
2-1
9
2 - ICONS AND WINDOWS PERFORMANCE AND VEHICLE
WINDOWS Left-hand area The arrangement of the
windows in the left hand area can be changed by
the operator. Any single-column window or map
which can be placed on the Run and/or Summary
screens can be placed in the left hand
area. Refer to the display manual and its
explanation of the Run Layout screen in the
Toolbox to review window placement in the left
hand area.
RCIL09DSP064BAG 1
2-2
10
2 - ICONS AND WINDOWS Performance windows Home
screen The icons on the home screen organize the
screens for all farming applications by their
function. Any vehicle specific software (for
example, autoguidance, performance, planting, or
harvesting software) can add its components to
these navigation icons.
RCIL09DSP090BAG 1
Press the Toolbox icon to access screens for
setting dis- play preferences and operator
preferences, for customiz- ing the Run screens,
for setting up the GPS receiver, etc. The
selections vary with the applications installed.
The Toolbox provides the location where shared
tools used by other applications can be
configured. Press the Run icon to access the six
user screens for all applications resident on
the display. These are the screens normally used
while operating the equipment. NOTE The names
for the Run screen navigation icons cannot be
edited. Press the Diagnostics icon to access
screens for check- ing software revisions,
controller status, specific sensor signals,
resource usage, GPS signal status (if equipped),
GPS receiver interface (if equipped), and for
checking and clearing fault codes. Press the
Calibration icon to access the screens for vehi-
cle and application specific calibrations such as
distance, area, crop, steering sensor,
etc. Press the Performance icon to access
screens for viewing the active data set and
analyzing operational results.
Press the Data Management icon to access screens
for importing data, filtering data, deleting
data, and managing map items. Press the Remote
Valves icon to access screens for con- trolling
remote valve flow, timers and locks.
2-3
11
2 - ICONS AND WINDOWS Press the Work Condition
icon to access screens for con- trolling hitch
settings.
Press the Electronic EOR icon to access screens
for work- ing with headland turning sequences.
2-4
12
2 - ICONS AND WINDOWS Field Performer
windows The Field Performer windows from the
Precision Farming and Trip Computer applications
may be placed on any of the Run and/or Summary
screens or the left hand area as indicated.
Refer to the display manual and its explanation
of the Run Layout screen in the Toolbox to review
window placement. Area/work control and
reporting windows The Area, Work and Road Control
windows determine how all information is
gathered on area and time spent in work and out
of work for the current task. This infor- mation
is used then to calculate fuel economy, power and
productivity.
RCIL09DSP001BAG 2
Area On/Off Placement label Area
On/Off Placement location Run screens or left
hand area The Area On/Off window is used to
determine whether area and time are accumulated
for the current task.
DGPS spatial data provides distance and time
informa- tion. Swath width is determined by
selecting an Imple- ment to perform the work.
The Area On/Off window then determines whether
work data is accumulated for area and time
reporting windows. This window acts as the
master control for whether production data is
accumu- lated.
RCIL09DSP002BAA 3
The Area On/Off window has two settings OFF and
ON. Press the Area On/Off window to access the
pop-up options window. Press the desired
option. When Area On/Off is set to OFF, area and
time data are not accumulated for the current
task. When Area On/Off is set to ON, area and
time data is accumulated for the current task.
RCIL09DSP002BAG 4
2-5
13
2 - ICONS AND WINDOWS Work Control Placement
label Work Control Placement location Run
screens or left hand area With the Area On/Off
window set to ON, the Work Control window
determines when area and time are accumulated
for the current task.
RCIL09DSP003BAA 5
Work control operates automatically based on the
input from the hitch position sensor, EHR 1
lever position or the implement status switch.
Choose the desired input in the Implement Type
window at Home gt Toolbox gt Impl. See 3-11 for
information about implement setup. When the
implement is lowered, the Work Control window
will read ON. When the implement is raised, the
Work Control window will read OFF.
Information is gathered on area and time for the
current task whenever the tractor is moving and
one of three conditions is present "Hitch
Implement" is selected for the implement

RCIL09DSP003BAG 6
type, and the hitch is down as sensed by the
stan- dard hitch position sensor, "EHR 1
Implement" is selected for the implement type,
and the lever for EHR 1 is in the retract or
float position, or the implement status switch,
if equipped, indi- cates the implement is down.


Although the Work Control window has two settings
ON or OFF automatic operation begins based
on the posi- tion of the implement, regardless
of the current selection in the window. With the
implement raised, if Area On/Off is turned ON
and work control is turned OFF, data accumulation
will begin when the implement is lowered the
first time. With the implement raised, if Area
On/Off is turned ON and work control is turned
ON, data accumulation will be- gin when the
tractor is moved. Automatic operation will begin
the first time the operator lowers and raises the
im- plement.
RCIL09DSP003BAG 7
2-6
14
2 - ICONS AND WINDOWS The OFF selection is
normally used by the operator to temporarily
stop data accumulation while the implement is
lowered. The may be required to cross a
non-arable section of the field or when driving
an overlapping pass. Press the Work Control
window to access the pop-up op- tions window.
Select OFF from the option window to
temporarily stop data accumulation. Press the
window again to return work control to automatic
operation.
RCPH11DSP100BAG 8
Road Mode Placement label Road Mode Placement
location Run screens or left hand area The
gathered information from the Area On/Off and
Work Control windows is further separated into
working time and distance as opposed to roading
time and distance by use of the Road Mode window.
The Road Mode window is used by the operator to
indi- cate when roading occurs for the current
task. The Road Mode window has two settings ON
or OFF. Based on this windows setting, the
software tracks the distance and time spent
roading for the current task separately from the
distance and time spent working.
RCIL09DSP005BAG 9
Press the Road Mode window to access the pop-up
options window. Press the desired option. Select
ON while the tractor is roading. An icon
displays in the Status area to indicate that
Road Mode is ON. Select OFF when the tractor is
not roading.
RCIL09DSP006BAG 10
2-7
15
2 - ICONS AND WINDOWS Remote valve
lock Placement label Lock rem. n Placement
location Run screens Use the lock windows to
lock and unlock operation of in- dividual remote
vales as required. See 3-9 for more infor-
mation.
RCIL11DSP197BAG 11
Remote valve timer Placement label Timer n
Placement location Run screens Use the 2 x 1
Timer window to set, enable and disable extend
and retract timer for individual remote valves as
required. See 3-5 for more information.
RCIL11DSP198BAG 12
Area Placement label Area Placement location
Run and Summary screens or left hand area On the
Run screens or left hand area, this window
reports accumulated area in hectares or acres
for the current task. The area counter is reset
to 0 (zero) when a new task is created or
selected. On the Summary screens, this window
reports accumu- lated area in hectares or acres
for the selected filters crop, tag, grower,
farm, field and task.
RCIL09DSP007BAG 13
2-8
16
2 - ICONS AND WINDOWS Distance Placement label
Distance Placement location Run screens or left
hand area This window reports accumulated
distance in kilometers or miles for the current
task. The distance is reset to 0 (zero) when a
new task is created.
RCIL09DSP008BAG 14
Distance Counter Placement label Distance
Counter Placement location Run screens or left
hand area This window reports accumulated
distance in kilometers or miles for the desired
time interval, e.g. multiple tasks, daily usage,
or weekly usage. The Distance Counter win- dow
is not linked to a particular task. Press the
Distance Counter window to reset the counter. A
confirmation message displays. Press the Yes
button to reset the counter. Press the No button
to continue ac- cumulating distance data.
RAIL12DSP0951BA 15
Distance, Field Placement label Distance,
Field Placement location Run and Summary screens
or left hand area On the Run screens or left
hand area, this window reports accumulated
distance in kilometers or miles for the current
task. On the Summary screens, this window reports
accumu- lated distance in kilometers or miles
for the selected fil- ters crop, tag, grower,
farm, field and task.
RCIL09DSP009BAG 16
Distance, Work Placement label Distance,
Work Placement location Run and Summary screens
or left hand area On the Run screens or left
hand area, this window reports the total
distance spent in work (as opposed to out of
work) for the current task. On the Summary
screens, this window reports the total distance
spent in work (as opposed to out of work) for the
selected filters crop, tag, grower, farm, field
and task.
RCIL09DSP011BAG 17
2-9
17
2 - ICONS AND WINDOWS Distance, Road Placement
label Distance, Road Placement location Run and
Summary screens or left hand area On the Run
screens or left hand area, this window reports
the total distance spent out of work (roading
distance) in kilometers or miles for the current
task. On the Summary screens, this window reports
the total distance spent out of work (roading
distance) in kilometers or miles for the
selected filters crop, tag, grower, farm, field
and task.
RCIL09DSP010BAG 18
Time, Field Placement label Time,
Field Placement location Run and Summary screens
or left hand area On the Run screens or left
hand area, this window reports the total time
spent in hours and minutes for the current
task. On the Summary screens, this window reports
the total time spent in hours and minutes for
the selected filters crop, tag, grower, farm,
field and task.
RCIL09DSP013BAG 19
Time, Work Placement label Time, Work Placement
location Run and Summary screens or left hand
area On the Run screens or left hand area, this
window reports the total time in hours and
minutes spent in work (as op- posed to out of
work) for the current task. On the Summary
screens, this window reports the total time in
hours and minutes spent in work (as opposed to
out of work) for the selected filters crop, tag,
grower, farm, field and task.
RCIL09DSP014BAG 20
Time, Road Placement label Time, Road Placement
location Run and Summary screens or left hand
area On the Run screens or left hand area, this
window reports the total time in hours and
minutes spent out of work (road- ing time) for
the current task. On the Summary screens, this
window reports the total time in hours and
minutes spent out of work (roading time) for the
selected filters crop, tag, grower, farm, field
and task.
RCIL09DSP012BAG 21
2-10
18
2 - ICONS AND WINDOWS Work Rate Placement
label Work Rate Placement location Run screens
or left hand area The Work Rate window reports
the area worked at this moment in hectares per
hour or acres per hour for the current task.
RCIL09DSP033BAG 22
Work Rate, Wrk, Avg Placement label Work Rate,
Wrk, Avg Placement location Run and Summary
screens or left hand area On the Run screens or
left hand area, this window reports average area
worked in hectares per hour or acres per hour
for the current task. The window is reset to 0
(zero) whenever a new task is selected. On the
Summary screens, this window reports average
area worked in hectares per hour or acres per
hour for the selected filters crop, tag,
grower, farm, field and task.
RCIL09DSP016BAG 23
Work Rate, Fld, Avg Placement label Work Rate,
Fld, Avg Placement location Run and Summary
screens or left hand area On the Run screens or
left hand area, this window reports average
area, in and out of work, accumulated in hectares
per hour or acres per hour for the current
task. On the Summary screens, this window reports
average area, in and out of work, accumulated in
hectares per hour or acres per hour for the
selected filters crop, tag, grower, farm, field
and task.
RCIL09DSP065BAG 24
Work Speed, Avg Placement label Work Speed,
Avg Placement location Run and Summary screens
or left hand area On the Run screens or left
hand area, this window re- ports average speed
while in work in kilometers per hour or miles
per hour for the current task. On the Summary
screens, this window reports average speed while
in work for the selected filters Crop, Tag,
Farm, Field and Task.
RCIL09DSP017BAG 25
2-11
19
2 - ICONS AND WINDOWS Fuel usage and economy
reporting windows The area, distance and time
information is correlated against engine power
and fuel usage input to produce the fuel usage
and economy windows. Fuel/Area Placement label
Fuel/Area Placement location Run screens or left
hand area This window reports fuel usage in
terms of area liters per hectare or gallons per
acre at this moment for the current task.
RCIL09DSP018BAG 26
Fuel/Area, Fld, Avg Placement label Fuel/Area,
Fld, Avg Placement location Run and Summary
screens or left hand area On the Run screens or
left hand area, this window reports average fuel
usage in terms of area average liters per
hectare or gallons per acre for the current
task. On the Summary screens, this window reports
average fuel usage in terms of area average
liters per hectare or gallons per acre for the
selected filters crop, tag, grower, farm, field
and task.
RCIL09DSP019BAG 27
Fuel/Distance Placement label Fuel/Dist Placement
location Run screens or left hand area This
window reports fuel usage in terms of distance
kilo- meters per liter or miles per gallon at
this moment for the current task.
RCIL09DSP020BAG 28
2-12
20
Suggest If the above button click is invalid.
Please download this document first, and then
click the above link to download the complete
manual. Thank you so much for reading
21
2 - ICONS AND WINDOWS Fuel/Dist, Fld,
Avg Placement label Fuel/Dist, Fld,
Avg Placement location Run and Summary screens
or left hand area On the Run screens or left
hand area, this window reports average fuel
usage in terms of distance average kilome-
ters per liter or miles per gallon for the
current task. On the Summary screens, this window
reports average fuel usage in terms of distance
average kilometers per liter or miles per
gallon for the selected filters crop, tag,
grower, farm, field and task.
RCIL09DSP021BAG 29
Fuel Economy Placement label Fuel,
Econ Placement location Run screens or left hand
area This window reports fuel economy in terms
of power kilo- watt hour per liter or
horsepower hour per gallon at this moment for
the current task.
RCIL09DSP022BAG 30
Fuel Econ, Fld, Avg Placement label Fuel, Econ,
Fld, Avg Placement location Run and Summary
screens or left hand area On the Run screens or
left hand area, this window reports average fuel
economy in terms of power average kilo- watt
hours per liter or horsepower hours per gallon
for the current task.
On the Summary screens, this window reports
average fuel economy in terms of power average
kilowatt hours per liter or horsepower hours per
gallon for the selected filters crop, tag,
grower, farm, field and task. Fuel/Hour Placement
label Fuel/Hour Placement location Run screens
or left hand area
RCIL09DSP023BAG 31
This window reports fuel usage, based on data
from the engine controller, in liters per hour
or gallons per hour at this moment for the
current task.
RCIL09DSP024BAG 32
2-13
22
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.eb
ooklibonline.com