CASE IH 1370 Tractor (Prior to SN8727601) Service Repair Manual Instant Download

1
TABLE OF CONTENTS 1270 TRACTORS PRIOR TO
SN8736001 1370 TRACTOR PRIOR TO
SN8727601 DESCRIPTION FORM

• SERIES SECTION
• General Specifications 1270 and 1370 Tractors
  ................................. 9-74055
• Detailed Specifications 1270 and 1370 Tractors
  ................................. 9-74065
• Lubrication 1270 and 1370 Tractors
  ............................................
  9-74075

20

• ENGINES
• 22 Cylinder Head and Valves, 451BD 451BDT, 1270
  Tractors ..................... 9-79632
• Cylinder Head and Valves, 504BD 504BDT, 1370
  Tractors ..................... 9-78613
• Engine Block Assemblies, 451BD 451BDT, 1270
  Tractors ...................... 9-79842
• 2011 Engine Block Assemblies, 504BD 504BDT,
  1370 Tractors ...................... 9-75225
• Air Intake System ................................
  ............................. 9-74285
• 2013 Cooling System - Engine Oil Filter
  .............................................
  9-78894
• 2165 Turbocharger System ........................
  ................................. 9-78435
• 2565 Turbocharger Failure Analysis
  .................................................
  9-78235
• I--UEL SYSTEM
• 3010 Fuel System ................................
  ..................................9-75297
• 3012 Robert Bosch Fuel Injection Pumps
  ............................................
  9-74937
• 3013 Roosa Master Fuel Injectors
  ..................................................
  . 9-74959
• 3015 Repairing Polyethylene Fuel Tank
  .............................................
  9-76305
• 3016 Repairing Nylon Fuel Tank
  ..................................................
  .. 9-79753
• HYDRAULICS
• 4005 Testing Tractor Hydraulic System
  .............................................
  9-45851
• 42 Hydraulic Oil Filters ........................
  .................................. 9-75155
• 4011 Hydraulic Charging Pump .....................
  ................................ 9-76285

30
40
50
60
70
Rau 9-74469
Printed in U. S. A.
2
80
ELECTRICAL 8010 Wiring Diagrams
..................................................
........... 9-77106 8011 Cab Wiring Diagram
(Starting w/Cab SN 7814176) ......................
........ 9-77698 8011 Cab Wiring Diagram (Prior
to Cab SN 7814176) ...............................
.. 9-77125 8012 Starting or Cranking Motors
..................................................
. 9-75366 8013 Battery Servicing and Testing
.................................................
9-75377 8014 Prestolite Alternator Systems
..................................................
9-75399 ACCESSORIES MISC. 92a Cab Sealing and
Recirculation ....................................
............ 9-75915 9005 Trouble Shooting -Air
Conditioning System .............................
....... 9-78895 9015 Gauging and Testing - Air
Conditioning System .............................
... 9-78995 9025 Compressor Isolation, Removal,
Installation and Evacuation - System Discharging,
Evacuation and Charging .........................
........ 9-79015 9035 Servicing Air Conditioning
Components ......................................
. 9-78705 9050 Operator's Seat Adjustment
..................................................
. 9-79755 HOW IT WORKS - TROUBLE SHOOTING 10012
PTO Control Valve, RH Dual Pump, LH Single Pump
............................ 9-76465 14014 Remote
Hydraulic Valves .................................
...................... 9-76556 14015 Variable
Volume Flow Divider Valve ........................
.................... 9-79615 141 Draft-O-Matic
Hydraulic System ................................
............... 9-74415 141 Differential Lock
..................................................
............ 9-74435 151 Steering Hand Pump and
Valve ............................................
.... 9-74385 10019 Power Take Off
..................................................
............. 9-76595 16030 Power Shift
..................................................
................ 9-76496 17010 Power Brakes
..................................................
.............. 9-76506 19010 Air Conditioning
..................................................
............ 9-78615
90
100
3
GENERAL SPECIFICATIONS 1270 AND 1370
TRACTORS SERIAL NUMBERS
TRACTOR MODEL AND SERIAL NUMBER
ENGINE SERIAL NUMBER
TR ANSMISSION SERIAL NUMBER
DIESEL ENGINES
General Type .....................................
................. 6 cylinder, 4 stroke cycle,
valve-in-head turbo-charged
Firing order ....................................
..................................................
........................... 1-5-3-6-2-4 Bore
(1270) ..........................................
..................................................
.................. 4-3/8 Inches (1370)
..................................................
..................................................
.......... 4-5/8 Inches Stroke ...................
..................................................
..... ...................... .......
............... 5 Inches Piston displacement
(1270) ..........................................
..................................... 451 Cubic
Inches (1370) ...................................
............................................ 504
Cubic Inches Compression ratio ...................
..................................................
.................................... 16.5 to
1 Cylinder sleeves ..............................
..................................................
......... Removable wet type No load governed
speed ...........................................
...................................... 2240 to
2280 RPM Rated engine speed .....................
..................................................
............................. 2100 RPM Engine
idling speed .....................................
..................................................
.... 725 to 775 RPM Valve tappet clearance
(exhaust) ........................................
............................... (HOT) .020
Inch (COLD) .025 Inch (intake) ...................
....................................... (Hot and
Cold) .015 Inch Hot settings are made after
the engine has operated at thermostat
controlled temperature for at least fifteen
minutes. Rac. Form 9-74055
4
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com
5
11-2 Piston and Connecting Rods Rings per piston
...... ...........................................
..................................................
.................. 3 Number of compression rings
............................... . . ..... ..
....................... ................ .
........ 2 Number of oil rings
..............................................
........................ . . .... ... . . .....
................ 1 Type of pins ..................
.. .. ............................................
................................... Full
Floating Type of bearings . ..... Replaceable
precision, steel back, aluminum or copper-lead
alloy liners Main Bearings Number of bearings
..................................................
........... .. .... ............... .... ..
..... . ........ 7 Type of bearings ......
Replaceable precision, steel back, aluminum or
copper-lead alloy liners Engine Lubricating
System Oil pressure ..................... 45 to
60 lbs. with engine warm and operating at rated
engine speed Type of system ......................
..................................................
.. Pressure and spray circulation oil pump
..................................................
..................................................
................ Gear type Oil filter
..................................................
................................................
Full flow spin on type Oil capacity
..................................................
................. With filter, 17 U.S. Quarts
(16.1 liters) Without filter, 15 U.S. Quarts
(14.2 liters) Fuel System Fuel injection pump
..............................................
Robert Bosch, Type PES (multiple plunger) Pump
timing ...........................................
... 30 Degrees Before Top Dead Center (Port
Closing) Fuel injectors ........................
...................................... Pencil
type (opening pressure 3200 PSI) Fuel
transfer pump ....................................
........ Plunger type, Integral part of injection
pump Governor ..................................
.............................. Variable speed,
fly-weight centrifugal type, Integral part of
injection pump. 1st stage fuel filter
..................................................
............................... Full flow spin
on type 2nd stage fuel filter
..................................................
.............................. Full flow spin on
type Fuel tank water trap and drain
..................................................
.. Located in base of fuel tank Fuel tank
capacity ........................................
................................ 80 U.S.
Gallons (302.8 liters) Fuel level gauge
..................................................
............ Electric, located on instrument
panel Hand primer pump ...........................
.......................... .... Located on top of
fuel transfer pump Fuel tank fuel filter
................................ ... Located in
fuel shut-off valve in base of fuel
tank Preliminary fuel filter .....................
............. Located at the bottom of the fuel
transfer pump
6
11-3
GENERAL SPECIFICATIONS Cooling System Capacity
(1270) ..........................................
....................................... 41 U.S.
Quarts (38.8 liters) (1370) ...................
..................................................
............ 42 U.S. Quarts (39.7
liters) Type of system ...........................
...........................................
Pressurized thermostat controlled impeller type
pump Thermostat ..................................
... Starts to open at approximately l750F. fully
open at 202F. Pressure cap required (who cab
air conditioner) ...............................
............................... 7 PSI (w/cab air
conditioner) ....................................
........................... 14 PSI When using a
properly operating 7 PSI (0.492 kg/cm)
pressure cap, the engine temperature can safely
rise to 230 F. (1100C.). With a 14 PSI (0.984
kg/cm2) pressure cap, the engine tem- perature
can safety rise to 2500F. (1210C.). Electrical
System Type of system - Diesel ...................
..................................................
. . 12 volt negative ground Batteries
............................. .. ....... ...
................... . (2) 12 volt batteries
connected in parallel Group size 30H, Rated at
1.255 to 1.265 specific gravity. Discharge rate
300 Amps. at OOF. Voltage drops to 9.2 after 10
seconds. voltage drops 1.0 volt per cell after 4
minutes. Alternator ..............................
..................................... 12 volt 55
amp. output, negative ground Voltage regulator
..................................................
.... 12 volt, solid state mounted on
alternator Starter motor .......................
..................................................
......... 12 volt with solenoid switch Head
lights (2) ......... ...... .............
............................... .......... 12
volt 40/40 watt, sealed beam Flood light (2)
(optional) ......................................
........................ 12 volt 35 watt, sealed
beam R. Rear flood ltght (1) (Optional)
................................................
12 volt 60 watt, sealed beam Amber warning light
(2) ..............................................
........... 12 volt, double face flasher type L.
Rear warning light (1) 12 volt, 60 watt
sealed beam combination tail and flood lamp
Circuit breaker system overload check
....................................... 12 volt
twin 40 amp. breakers connected in parallel, 80
amp. rating - 60 amp. Minimum continuous
capacity Lights circuit breaker
..................................................
............. 40 amp. located on light
switch Parking brake warning light
..................................................
.............. 12 volt, red flasher type Parking
Brake Type ......................... Rod
actuated by Orscheln type handle - adjustable
from operator's seat Hydraulic Power Assist
Brake Type .......................................
............. Hydraulic, Power assisted,
self-adjusting multiple plate wet type
differential brakes.
7
11-4 Power Shift Transmission Type
..................................................
3 speed compound planetary with hydraulically
actuated clutches and a 4 speed gear range
section. Gear selection ..........................
........................................ 12
speeds forward 3 speeds reverse Shifting
..................................................
............ Hydraulic power shifting controlled
by a lever on operator's console. 4 speed range
controlled by a mechanical shifter from a lever
on operator's console. Hydrostatic Power
Steering Dual pump type (8 gal. section)
.............................................
Gear type, driven by the engine Pump capacity at
2000 engine RPM .. ... .... ...... ..... ...
............................ .. 8 GPM (30.3
I/mn) HGA Hydrostatic Type .......................
.................................. Integral and
Bi-directional gerotor metering section, actuated
by the steering wheel. Steering cylinders
..................................................
............................. 2 double acting
cylinders Remote Hydraulic System Dual pump (20
gal. section) ....................................
............................... Direct drive gear
type Type remote valve (R.H. side)
..................................................
............... Dual valve-individual Portable
cylinder coupling (R.H. side) ...................
............. Quick detachable break-away type
Pump capacity at 2000 engine RPM
..................................................
......... 20 GPM (75.7 l/mn) Relief valve
pressure .........................................
......... 1900 to 2050 PSI (133.6 to 144.1
kg/cm2) Portable cylinders ......................
..................................................
...............................
Available Variable Flow Remote Hydraulic
System Single Pump ...............................
..................................................
......... Gear type, direct drive Type remote
valve (L.H. side) ...............................
............................... Dual
valve individual hand lever control Pump capacity
at 2000 engine RPM ..............................
............................. 20 GPM (75.7
I/mn) Relief valve pressure ......................
..................................................
................ 1900 to 2050 PSI (133.6 to 144.1
kg/cm2) Variable flow control valve
..................................................
...................... Hand operated from console
- minimum 5 GPM (19 I/mn) to maximum 20 GPM (75.7
l/mn) Portable cylinder couplings (L.H. side)
..................................................
........ Quick detachable break-away
type Portable cylinders .........................
..................................................
............................ Available Power
Take-Off Type clutch ............................
..................................................
.............. Hydraulically operated Rotation
..................................................
..................................................
.................. Clockwise Spline size
..................................................
............................... 21 spines, 1-3/8
(34.9mm) dia. Engine speed 2000
RPM ..............................................
............................ 1000 RPM shaft
speed Draft-0-Matic System Type of sensing
..................................................
..................................................
..... Lower link Type control ....................
..................................................
...................................... Hand
Lever Type valve ................................
.............................................. 3
positions raise hold lower Type draft arms
..................................................
........ Swinging, with manual float adjustment
Type hitch .......................................
..................................................
......... 3 point category III
8
II-5 Drawbars Standard or Yoke Type
..................................................
.............. Full swinging roller mounted Will
accommodate a 1-1/2 Inch (38.1mm) Dia.
Pin. APPROXIMATE TRAVEL SPEEDS IN MPH Power Shift
Transmission
POWER SHIFT TRANSMISSION RANGE TRANSMISSION RANGE TRANSMISSION RANGE TRANSMISSION RANGE
POWER SHIFT 1 2 3 4
1 1.9 mph (3.1 km/h) 3.4 mph (5.5 km/h) 5.2 mph (8.4 km/h) 10.8 mph (17.4 km/h)
2 2.6 mph (4.2 km/ h) 4.5 mph (7.2 km/h) 6.8 mph (11.0 km/h) 14.3 mph (23.0 km/h)
3.2 mph (5.2 km/h) 5.6 mph (9.O km/h) 8.4 mph (13.5 km/ h) 17.8 mph (28.7 km/h)
9
116 APPROXIMATE OVERALL MEASUREMENTS
TIRE TIRE TIRE WHEEL WHEEL WHEEL
A A 11.00-16 F2 11.00-16 F2 11.00-16 F2 W8L-16 W8L-16 W8L-16
B B 20.8-38 R1 20.8-38 R1 20.8-38 R1 W18L-38 W18L-38 W18L-38
c 116 INCHES (2 946mm) 116 INCHES (2 946mm) E 85 INCHES (2 159mm) 85 INCHES (2 159mm) 16 INCHES (4O6mm)
105 INCHES (2 667mm) 105 INCHES (2 667mm) F 182 INCHES (4 623mm) 182 INCHES (4 623mm) 160 INCHES (4 O64mm)
Turning Radius ...................................
..................................................
. 177-1/2 Inches (4 509m Turning Radius with
Brake Assistance ................................
................. 159-1/2 Inches (4 051m Height
over cab .........................................
.................................................
116 Inches (2 946m Height over muffler on cab
models ...........................................
................. 136 Inches (3 454m APPROXIMATE
WEIGHT Tractor without cab .......................
..................................................
...... 11,690 Pounds (5 302 h Tractor with cab
..................................................
................................. 13,170 Pounds
(5 974 h
10
11-T
TIRE AND WHEEL EQUIPMENT Front
TIRE SIZE TIRE PLY RIM SIZE TREAD TYPE TIRE PRESSURE
7.50-18 6 5.5OF-18 F2 40 PSI (2.8 kg/cm2)
9.50-20 6 W7L-2O F2 40 PSI (2.8 kg/cm2)
1O.00-16 6 W8L-16 F2 28 PSI (1.9 kg/cm)
1O.OO-16 8 W8L-16 F2 36 PSI (2.5 kg/cm2)
11 .OO-16 6 W8L-16 F2 28 PSI (1.9 kg/cm2)
14L-16.1 6 W11L-16.1 F2 24 PSI (1.7 kg/cm2)
Rear
TIRE SIZE TIRE PLY RIM SIZE TREAD TYPE TIRE PRESSURE
16.9-38 6 W14L-38 R1 18 PSI (1.3 kg/cm2)
16.9-38 8 W14L-38 R1 24 PSI (1.7 kg/cm2)
18.4-38 6 W16L-38 R1 R2 16 PSI (1.1 kg/cm2)
18.4-38 8 W16L-38 R1 R2 20 PSI (1.4 kg/cm2)
20.8-34 8 W18L-34 R1 18 PSI (1.3 kg/cm2)
2O.8-38 8 W18L-38 R1 R2 18 PSI (1.3 kg/cmi)
20.8-38 1O W18L-38 R1 R2 22 PSI (1.5 kg/cm2)
24.5-32 1O DW21-32 R1 R2 2O PSI (1.4 kg/cm2)
23.1-34 8 DW2O-34 R1 R2 16 PSI (1.1 kg/cm2)
12.4-42 6 W9-42 R1 24 PSI (1.7 kg/cm2)
NOTE Keep tires inflated to recommended
pressures. Check pressures at least every 50
hours of operation or once a week, whichever
occurs first. Do not reduce tire pressure to
increase traction. When plowing, 'increase furrow
wheel tire pressure 4 PSI (0.281 kg/cm).
11
11-8
FRONT WHEEL TREAD SPACING (With Wheels Dished in
Only) Adjustable Axle Spacing in Inches
3/4 IN. (J 9.1mm) OFFSET WHEEL 1-1/4 IN. (31.8mm) OFFSET WHEEL I -1/2 IN. (38.8mm) OFFSET WHEEL NON-OFFSET WHEEL
1-1/2" t
s9.5-87.s INCH (1 223mm) 60-88 INCH (1 524-3 235mm) 63. 5-9o.5 INCH (J 588-2 299mm) 61-89 INCH ( 1 549-2 26 \ mm)
I TO 8 SETTINGS
NOTE Axle spacing listings above are from the
narrow setting, with increments of 4 inc (101.6
mm) to the wide setting. NOTE When tightening
the 5/8 in. (15.9 mm) dia. front wheel bolts,
torque 115 to 130 ft. (15.9 to 18 m-kg) .
12
11-9
REAR WHEEL TREAD SPACING
TIRE SIZE RIM TURNED OUT RIM TURNED IN
96 INCH (2 4S8mm) RE AR AXLE
24.5 X 32 76 TO 95 INCH (1 930 TO 2 413mm) 68 TO 77 INCH (1 727 TO 1 956mm)
23.1 X 34 75 TO 94 INCH (1 9O5 TO 2 388mm) 67 TO 78 INCH (1 7O2 TO 1 981 mm)
12O INCH (3 O48mm) RE AR AXLE
24.5 X 32 76 TO 1 19 INCH (1 930 TO 3 O23mm) 68 TO 1 O1 INCH (1 727 TO 2 565mm)
23.1 X 34 75 TO 118 INCH (1 905 TO 2 997mm) 67 TO 1 O2 INCH (1 7O2 TO 2 591 mm)
TIRE SIZE BEAD OUTSIDE BEAD
96 INCH (2 4S8mm) RE AR AXLE
20.8 X 34 72 TO 91 INCH (1 829 TO 2 31 1 mm) 64 TO 83 INCH (1 626 TO 2 1O8mm)
120 INCH (3 O48mm) RE AR AXLE
20.8 X 34 72 TO 1 15 INCH (1 829 TO 2 921 mm) 64 TO 107 INCH (1 626 TO 2 718mm)
13
1110 REAR WHEEL TREAD SPACING (Continued)
TIRE SIZE WHEEL DISHED OUT WHEEL DISHED IN WHEEL DISHED IN
96 INCH (2 438mm) REAR AXLE 96 INCH (2 438mm) REAR AXLE 96 INCH (2 438mm) REAR AXLE 96 INCH (2 438mm) REAR AXLE
16.9 X 38 82 TO 1 O9 INCH (2 O83 TO 2 769mm) (1 6O TO 84 INCH 524 TO 2 134mm)
18.4 X 38 82 TO 109 INCH (2 083 TO 2 769mm) (1 62 TO 84 INCH 575 TO 2 134mm)
20.8 X 38 82 TO 1O9 INCH (2 O83 TO 2 769mm) (1 64 TO 84 INCH 626 TO 2 134mm)
120 INCH (3 O48mm) REAR AXLE 120 INCH (3 O48mm) REAR AXLE 120 INCH (3 O48mm) REAR AXLE 120 INCH (3 O48mm) REAR AXLE
16.9 X 38 82 TO 133 INCH (2 083 TO 3 378mm) (1 6O TO 108 INCH 524 TO 2 743mm)
18.4 X 38 82 TO 133 INCH (2 083 TO 3 378mm) (1 62 TO 1O8 INCH 575 TO 2 743mm)
2O.8 X 38 82 TO 133 INCH (2 083 TO 3 378mm) (1 64 TO 108 INCH 626 TO 2 743mm)

Outer dimension can be 2 less when clamp is
mounted on inside.
14
11-11
Dual Rear Wheel Tread Spacing
OUTSIDE WHEEL
INSIDE WHEEL
OUTSIDE WHEEL
4 (101.6mm)
TIRE SIZE MIN. TREAD MIN. TREAD MAX. TREAD INNER WHEEL OUTER WHEEL
96 INCH (2 438mm) REAR AXLE
16.9 X 38 6O IN. (1 524mm) 1 O2 IN. (2 591 mm) 1O9 IN. (2 769 mm) CAST CAST
1s.4 x ss 62 IN. (1 575 mm) 107 IN. (2 718mm) 109 IN. (2 769mm) CAST CAST
4B.4 X 38 62 IN. (1 575mm) 107 IN. (2 718mm) 109 IN. (2 769mm) CAST STEEL
20.8 X 38 64 IN. (1 626mm) 113 IN. (2 87Omm) 113 IN. (2 87Omm) CAST STEEL
12.4 X 42 56 IN. (1 422 mm) 101 IN. (2 565mm) 109 IN. (2 769mm) CAST CAST
12.4 X 42 56 IN. (1 422mm) 89 IN. (2 261 mm) 91 IN. (2 31 1mm) CAST STEEL
12 0 INCH (3 O48mm) REAR AXLE
20.8 X 34 64 IN. (1 626mm) 1 13 IN. (2 87Omm) 1 15 IN. (2 921 mm) CAST CAST
16. x as 60 IN. (1 524mm) 102 IN. (2 591 mm) 135 IN. (3 378mm) CAST CAST
zs.4 x ss 62 IN. (1 575mm) 107 IN. (2 718mm) 135 IN. (3 378mm) CAST CAST
18.4 X 38 62 IN. (1 575mm) 107 IN. (2 718mm) W/O SPACER 133 IN. (3 378mm) WHO SPACER CAST STEEL
18.4 X 38 62 IN. (1 575mm) 128 IN. (3 251 mm) W/SPACER 152 IN. (3 961 mm) WZSPACER CAST STEEL
20.8 X 38 64 IN. (1 626mm) 114 IN. (2 896mm) 133 IN. (3 378mm) CAST CAST
2o.s x ss 64 IN. (1 626mm) 113 IN. 2 87Omm) W/O SPACER 157 IN. (3 48Omm) W/O SPACER CAST STEEL
2o.s x ss 64 IN. (1 626mm) 128 IN. (3 251mm) W/SPACER 152 IN. (3 961 mm) W/SPACER CAST STEEL
1 2.4 X 42 56 IN. (1 422mm) 101 IN. (2 565mm) 133 IN. (3 378 mm) CAST CAST
12.4 X 42 56 IN. (1 422mm) 89 IN. (2 261mm) W/O SPACER 115 IN. (2 921 mm) W/O SPACER CAST STEEL
12.4 X 42 56 IN. (1 422mm) 111 IN. (2 819mm) W/SPACER 134 IN. (3 4O4mm) W/SPACER CAST STEEL
'Overall minimum dimension can be 2 inches
(50.8mm) less when clamp is mounted on inside o1
cast outer dual wheels.
15
11-12 FUEL SPECIFICATIONS Case Diesel engines
are designed to operate most efficiently when
using a Number 2 Diesel Fuel. Most well known
refiners and distributors market a good grade of
Diesel Fuel and there should be no difficulty in
obtaining it. Do not confuse Number 2 Diesel Fuel
with Number 2 Furnace Oil, as this does not
always meet the fuel specifications for diesel
engines. SPECIFICATIONS FOR SUITABLE NUMBER 2
DIESEL FUEL A.P.I. Gravity (Minimum)
..................................................
..................................................
..... 30 Pour Point (Maximum) ...................
..................................................
. 100 Fahrenheit (50C.) below ambient operating
temperature. DISILLATION 90 Point
..................................................
............................... 5400-6250
Fahrenheit (2820-3290C.) End Point
..................................................
........................................... 6750
Fahrenheit (3570C.) FLASH POINT (Minimum)
..................................................
........ 1250 Fahrenheit (520C.) or
legal Kinematic Viscosity centistokes _at_ 100
Fahrenheit (380C.) ..............................
.................................. 2.0-4.3
Seconds Cetane No. (Minimum) ...................
.................................................
40 (45-55 For Winter or high altitude use) Water
and Sediment Vol. (Maximum) .....................
..................................................
............ .05 Ash, wt. (Maximum)
..................................................
..................................................
.......... .01 Sulphur wt. (Maximum)
..................................................
..................................................
...... .5 Carbon Residue on 10 (Maximum)
..................................................
......................................
.2 Corrosion, Copper Strip, 3 hrs. _at_ 2120
Fahrenheit (100 C.) ..............................
..................................................
...... No. 3 (32-40 Saybolt Universal
Seconds) NOTE The use of Number 1 Diesel Fuel,
which is a lighter fuel, may result in a loss of
engine power and also increased fuel consumption
because it has less heat content and a lower
viscosity than Number 2 Diesel Fuel. In extremely
cold weather, temporary use of No. 1 Diesel Fuel
(or a mixture of No. 1 or No. 2 Diesel Fuel) may
be necessary. This will keep the wax crystals
from forming. These wax crystals plug fuel
filters and prevent fuel flow to the injection
pump.
16
Suggest If the above button click is invalid.
Please download this document first, and then
click the above link to download the complete
manual. Thank you so much for reading
17
11-13
FUEL CONDITIONER The following fuel conditioner
is available from your Authorized Case Dealer to
help insure continued fine performance that was
designed into your Case Engine. Case Diesel Fuel
Conditioner is recommended for use in all Case
Diesel engine fuel systems. The fuel conditioner
should be used as directed on the container.
iesel Fuel Conditioner
WARN ING
Prevents gummy deposits from forming in the fuel
system. Improved lubrication to the upper
internal parts of the engine. Eliminates fouling
of the injector nozzles, valves and
manifolds. Helps keep condensation suspended in
the fuel, allowing it to be burned with the
fuel. Maintains a higher degree of fuel
combustion and higher engine performance from
the engine burns.
the fuel
18
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com