(Fixed) Silhouette Cameo Not Cutting Issue

1
(Fixed) Silhouette Cameo Not Cutting Issue
2

• Everything is good when your Silhouette Cameo
  cuts without any hassle. But what if it suddenly
  stops cutting like it is supposed to or does not
  cut at all?
• Is your Silhouette Cameo cutting properly? If
  not, the machine may not be calibrated, there may
  be no blade within the machine, the blade may be
  improperly seated, or there is too glossy
  material. Another reason for the Silhouette Cameo
  not cutting issue can be incorrect roller
  placement.
• Before you make your cutting machine a thing of
  the past, read this comprehensive guide dedicated
  to troubleshooting the Silhouette Cameo not
  cutting issue. Let us walk you through the right
  methods.

3
Fixing Silhouette Cameo Not Cutting Issue
Potential Problems

• The users might face many challenges when
  resolving the Silhouette Cameo not cutting issue.
  A few of them are as follows
• Cutting settings
• Design issues
• Blade issues
• Material issues

4
Method to Fix Silhouette Cameo Not Cutting Issue

• The following are all the key methods to fix
  Silhouette Cameo not cutting issue. Lets take a
  look at each one
• Method 1 Check Blade
• Step 1 Make sure the blade is fully seated in
  the housing.

5

• Step 2 Remove the blade from its carriage if
  cutting thicker materials.
• Step 3 Ensure that the cap on the tip is not
  unscrewed.

6

• Step 4 While checking the cap, check if the
  blade requires cleaning to check, unscrew the
  cap.
• Step 5 Grab a brush and brush away any debris
  found.

7

• Step 6 While cleaning, check and see if there
  are any chips in the blade.
• Step 7 If the blade is chipped, you may need to
  change it.

8

• Step 8 Once done, screw the cap back on.

9
To Sum Up 

• No need to worry when your Silhouette Cameo does
  not cut right. Just remember the above solutions,
  and you are good to go. Follow each step
  carefully and be wary of the challenges that may
  arise during troubleshooting.
• If you are still struggling to fix the
  Silhouette Cameo not cutting issue, remember
  that expert assistance is always available.

10
Contact Information