Fix HP Printer Error Code EBS00P0004

1
Fix HP Printer Error Code EBS00P0004
2

• HP printers are prone to show numerous error
  codes, and EBS00P0004 is one of them. If you see
  this code on your printer, then it shows that the
  device is facing hardware malfunction, internal
  system failure, software glitches, and many
  others. Getting rid of this error code is a
  cakewalk if you have the knowledge of the correct
  troubleshooting methods. If you have no clue how
  to resolve this issue then here is going to
  streamline the process. Here, acquire a deep
  understanding of the top method to remove the
  error code EBS00P0004 from your HP printer
  without much hustle.

3
Solution 1 Reset the Printer
The first thing you need to do to remove the
error code EBS00P0004 from your HP printer is to
perform a hard reset of the device. Here are the
steps to do that.    1. When the printer is
powered on, disconnect the power cord from the
printer.
4

• 2. Unplug the other end of the power cord from
  the power source.

5

• 3. Then, wait for around 60 seconds.

6

• 4.  After that, reconnect the power cord to your
  HP printer and power outlet.

7

• 5. The printer will reset and turn on
  automatically.

8
Final Words

• Your HP printer can show many error codes when it
  is facing some errors. Plus, error code
  EBS00P0004 indicates that your printer is facing
  technical issues or firmware problems. Here, we
  have shared the top method that can assist you in
  troubleshooting this error code from your device.
  However, it would be best to look for more
  profound solutions if the problem is not going
  easily.

9
Contact Information