Simuleren van originele GSD4 monitor

1
Standaardkeuzes in het Hoofdmenu
Prestatie monitor
Totalen
Radar Calibreren
Simuleren van originele (GSD4) monitor
Homepagina indelen
Berichten centrum voor diagnose en service
meldingen
Algemene knoppen
Achtergrondverlichting
Volume
Annuleren / weigeren
Bevestigen, OK, Opslaan
X
V
Taal
Tijd / Datum
Teller op 0 zetten (reset)
Instellen Eenheden
Keuze opnemen hand of via...
De menutoets hoofdmenu toont alle hoofdmenus en
toepassingen. Deze toets blijft altijd zichtbaar.
Via een toets uit het hoofdmenu komt men in de
beginpagina van een toepassing of submenu. Men
kan dan vaak weer kiezen voor meerdere submenus.
Terug naar de homepagina (homepage)
2
GS Hoofdmenu
(View) Beeld
1
(Summary) Totaaloverzicht
Kaarten
Selecteren van getoonde GreenStar Basics/Pro
functies Via de MENU softkey, vervolgens
Greenstar Pro
(Activations) Activering
Perceelskaart (Map)
(Client) Klant
Gegevens (Perceels)
(Farm) Boerderij
Omtrek / Opp. (Boundaries)
(Field) Perceel
Resources
Perceel (Resources)
Markeer Vlaggen (Mark Flags)
(Task) Bewerking
2
(Operator) Chauffeur
Spoorvolging
Verschuiven (Shift Track)
Spoor 0 instellen (Set Track)
(Weather) Weer
Spoorvolging weergave (Guidance View)
Condities (Conditions)
AutoTrac Activeren
(Crop Growth Stage) Grootte Gewas
Stuurgevoeligheid (Sensitivity)
(Soil Moisture) Vochgehalte bodem
Sporing Type
Werktuig
(Soil Temp) Bodemtemperatuur
Spoorvolging instellingen (Guidance Settings)
Geluidssignaal sporing
Machine Type
Machine
Kopakker weergave (Turn View)
(Hitch Type) Aankoppeling
Keer voorspelling (Turn Predictor)
(Recording source) Signaal opnemen
Lead Compensation
Werktuig (Implement)
(Type) Werktuig Type
Accuracy Indicator Step Size
(Offset) Werktuig positie
Uit (Off)
(Width) Werktuig Breedte
Spoor verchuiven (Shift track)
(Track Spacing) Spoorafstand
Klein (Small Shifts)
Registratie
Overlap
Diagnose
Groot (Large Shifts)
(Tillage) Grondbewerking
Reset verschuiven (Clear All Shifts)
(Planting) Planten/Zaaien
Diagnose / Systeemgegevens (Diagnostic Readings)
(Product Operation) Verzorging
(Harvest) Oogst

• Componenten geïnstalleerd en werkend
• AT code geactiveerd (dealer), AB lijn gekozen,
  Sporing type gekozen, SF-1 / SF2 ontvangst
• Automatisch sturen op display aan gezet
  (Stuur/Steer ON)
• Autotrac werkt, de knop automatisch sturen op
  zijconsole / armleuning is bediend

AutoTrac Cirkel (Pie)
(Other) Overigen
Totalen
Let op! Indien bureau / desktop software gebruikt
wordt moet de datacard vooraf hiervoor
geprepareerd worden (Farms, Fields, Products,
etc.)
(Field) Perceel
1
4
(Task) Taak/Bewerking
A
3
2
(Crop) Gewas
(Load) Lading
3
Tracking Mode
Shifts Off
Shift Track
Set Track 0
Tracking Tones
Small Shifts
AutoTrac Activation
Turning View
Large Shifts
Steering Sensitivity
Turn Predictor
Clear All Shifts
Path Accuracy Indicator
Lead Compensation
Accuracy Indicator Step Size
Algemene knoppen
Getting Started
Annuleren / weigeren
Bevestigen, OK, Opslaan
Accessing GreenStar Basics/Pro
Select Menu, GreenStar Pro application
button
Teller op 0 zetten
Selecting the Menu Button will allow you to
access all display applications. The Menu button
will be on every display screen
Keuze opnemen hand of via...
AutoTrack Pie

• Componenten geïnstalleerd en werkend
• AT code geactiveerd, AB lijn aanwezig, Sporing
  type gekozen, SF-1 / SF2 aaanwezig
• Automatisch sturen op display aan (Stuur/Steer
  ON)
• Sturen knop op zijconsole / armleuning bediend

1
4
Selecting the GreenStar Basics/Pro application
will navigate you to the GreenStar Basics/Pro
applications Main Page. From the Main Page
you navigate through the buttons to Guidance,
Documentation, Mapping to set up your information.
A
3
2
4
Accessing GreenStar2 Guidance
3. Select Guidance
1. Select Menu
2. Select GreenStar Pro
Remember! To Activate AutoTrac the following
criteria must be met AutoTrac Activated
(24-digit Activation Code Entered) Track 0
has been set up AutoTrac Status is Active
GPS signal status is present (RTK available in
North America only) Vehicle is in forward
gear Vehicle speed is within operating range
(See Operators Manual) Vehicle heading is
within 45 degrees of desired track Vehicle
distance from track is within 40 of track
spacing Operator is in seat SSU is in normal
operating mode How to set up Track 0 Select a
starting point in your field and select Track 0.
Select the drop down box labeled Current Track
0 and select New/Edit. Enter the name for the
A/B line you are creating. Next select the
Method drop down box and choose one of the
following methods to create Track 0. A
B Set A to save current location. Drive a
minimum of 3 m (10 feet) or to end of pass and
press Set B to Save Current Location. A
straight line is then defined between Points A
and B. A Heading Set A to save
current location.Enter the heading/direction
of Track 0. The direction can be a
number between 0 and 360. 0 or 360 indicates
north, 90 east and so on.

• Automatic B Set A to save current location.
  Set B will automatically be set once the
  vehicle has traveled 5 m (15 feet).
• Lat./ Lon. Enter a Lat. Lon. and push Set A
  then enter a Lat. Lon. and push Set B
• Tips for Optimizing AutoTrac
• Remember, AutoTrac system accuracy is dependent
  on many variables
• AutoTrac System Accuracy GPS Signal Accuracy
  Vehicle Setup Implement Setup Soil
  Conditions
• GPS Signal Accuracy
• With SF2, allow accuracy bar to reach at
  least 80, before engaging AT.
• Be sure the Terrain Compensation Module
• (TCM) is setup properly
• Enter Receiver Height
• Enter Receiver Fore/Aft
• Proper Calibration

Implement Setup Check to ensure the implement
is setup properly Replace worn or missing
components (shovels, shanks, etc) Check for
properly adjusted gauge wheels Check hydraulic
stop adjustments Soil Conditions Remember
AutoTrac performance may change with
different implements and soil conditions.
Be sure to have the above variables covered for
optimum performance.
Adjust backlighting
Select Menu
Select Display
/- for backlight
Helpful hintsLost? Press
For more information refer to the Operators
Manual