Title: The EU Training Programme for Turkish Chamber Executives Machinery
1The EU Training Programmefor Turkish Chamber
ExecutivesMachinery
Mr Henk de Pauw, Eurochambres expert
henk.depauw_at_certif.be Ankara, 18 June
2009 Istanbul, 19 June 2009
www.eurochambres.eu
Eurochambres Chamber House 19 A/D Avenue des
Arts B-1000 Brussels BelgiumTel 32 (0)2
282 08 50 Fax 32 (0)2 230 00 38 Email
eurochambres_at_eurochambres.eu
2Before CE
3After CE
4When is a product a "machine" ?
- Are the following products a "machine" ?
5Are the following products a "machine" ?
6Are the following products a "machine" ?
7Are the following products a "machine" ?
8Are the following products a "machine" ?
9Definition of a machine
- An assembly of linked parts or components
- At least one of the components moves
- joined together for a specific application
10What Else ?
- Safety Components
- Lifting Eqpt.
11Definition of a machine
12Definition of a machine
- An assembly of linked parts or components
- At least one of the components moves
- joined together for a specific application
13What Not excluded from the directive ?
- Machinery whose only power source is directly
applied manual effort, unless it is a machine
used for lifting or lowering loads. - Machinery covered by other Directives
- Means of Transport
14What Not excluded from the directive ?
15What Not excluded from the directive ?
16What Not specific cases
- Firearms
- Eqpt. for use in fairgrounds and/or amusement
parks - Everything radioactive
- Military or Police eqpt
17Procedure
18Annex IV Machinery
- Several pieces of woodworking eqpt
- Other dangerous machinery
19The CE-mark should be affixed when the machine
is...
- ...placed on the market for the first timeor
- ...put into service for the first time
20Self Certification by Manufacturer
- Administrative Obligations
- Constructive Obligations
21Self certification by the Mftr Administrative
Obligations
- Technical Construction File
- See previous chapter
- Declaration of Conformity
- Declaration type IIA
- Declaration type IIB
- Parts
- For customs reasons only
- Declaration type IIC
- Safety Components
22Self certification by the Mftr Constructive
Obligations
- Construct in accordance to the Essential
Requirements - Apply the CE Mark
23Noise Emissions by equipment for use outdoors
- Only applicable to equipment listed specificaly
in art. 12 13 - Art. 12 equipment subject to noise LIMITATIONS
- Art 13 equipment subject to noise MARKING
24Machinery directive the future
- Directive 2006/42/EC was published on 9th June
2006. - Applicable from 29th December 2009
- Updates on
- http//europa.eu.int/comm/enterprise/mechan_equipm
ent/machinery/index.htm
25Machinery directive the future
- The scope of the Machinery Directive is extended
- The borderline between the Machinery and the Low
Voltage Directives is clarified. - The borderline with the Lifts Directive has also
been clarified. - The range of safety components subject to the
Machinery Directive has been clarified.
26Machinery directive the future
- Redrafting (little change) of the essential
requirements - More options for annex IV manufacturers
- More powers for market surveillance
27Machinery
Thank you Please feel free to contact
us eurochambres_at_eurochambres.eu
With the support of the European Commission
www.eurochambres.eu
Eurochambres Chamber House 19 A/D Avenue des
Arts B-1000 Brussels BelgiumTel 32 (0)2
282 08 50 Fax 32 (0)2 230 00 38 Email
eurochambres_at_eurochambres.eu