Module 4: Learning about Other Devices

1
Module 4 Learning about Other Devices

• These Labs can be performed using the following
  topology or using the ones in the lab books-
• 4.1.4 Creating a Network Map using CDP
• 4.1.6 Using CDP Commands
• 4.2.2 Establishing and Verifying a Telnet
  Connection
• 4.2.3 Suspending and Disconnecting Telnet
  Sessions
• 4.2.4 Advanced Telnet Operations
• 4.2.5a Connectivity Tests Ping
• 4.2.5b Connectivity Tests Traceroute
• 4.2.6 Troubleshooting IP Address Issues

2
Lab Topology
3
Instructions

• Use RIP as the routing protocol
• Use Loopback interfaces to simulate networks
• Router(config) int Lo0
• Router(config-if) ip address ..
• Use ip unnumbered for the serial interfaces
• Router(config)int s0
• Router(config-if) ip unnumbered lo0

4
Module 5 Managing Cisco IOS Software

• Students can perform these labs-
• 5.1.3 Using the Boot System Command
• 5.1.5 Troubleshooting Config Register Boot
  Problems
• 5.2.6a Password Recovery Procedures

5
Module 5 Managing Cisco IOS Software

• These Labs will be demonstrated
• 5.2.3 Managing Configuration Files with TFTP
• 5.2.5 Managing IOS Images with TFTP
• This lab will be skipped
• 5.2.6b Managing IOS Images with ROMmon and Xmodem