TM Report: 8.30 - PowerPoint PPT Presentation

1 / 5
About This Presentation
Title:

TM Report: 8.30

Description:

... reasons to use prescale sets other than the ones prescribed in the run plan ... Rejection too low (no L2 and/or too little L3 rejection) August 27, 2002. TM Report ... – PowerPoint PPT presentation

Number of Views:18
Avg rating:3.0/5.0
Slides: 6
Provided by: d0serve
Category:
Tags: little | ones | report

less

Transcript and Presenter's Notes

Title: TM Report: 8.30


1
TM Report8.30 week 1
  • Elizabeth Gallas FNAL CD
  • Tom Diehl FNAL PPD
  • Terry Toole U. Maryland
  • TriggerMeister Home Page
  • http//www-d0.fnal.gov/trigger_meister/private/www
    /

Trigger Board Meeting September 24, 2002
2
Miscellaneous Issues/Status (1)
  • Global_CMT-8.30
  • created jointly by Diehl, Gallas, Toole last
    Wednesday
  • Prescale files same priority scheme as last
    time

Priority MAX rate to tape
Ultra Unprescaled at all lum
High Up to 3 Hz
Medium Up to 1 Hz
Low Up to .25 Hz (0.5 in 8.1)
Extra low Highly prescaled or prescaled at 10M
Fixed Fixed rate
3
Trying to exploit rate capability
  • Rate test on Wednesday 18-Sep-2002. Result
  • Reinhard 500 / 250 / 50 Hz
  • Dmitri 400 / 200 / 40 Hz
  • Measures of good/bad
  • SCLinits per hour
  • Pauses per hour
  • Average FEB
  • Live fraction
  • Rate to tape
  • Trying to separate rate dependent from non-rate
    dependent components of these effects
  • Sources of downtime
  • Crate 22 (l2muf inputs) caused by L1 FE
  • CFT downloads
  • SMT high voltage
  • Notes
  • We are collecting these measures run by run,
    using results to adjust prescale files
  • This method is not ideal because
  • Factors out of our control
  • No run is perfect

4
Global_CMT-8.30 Sep 20-22,2002
5
Global_CMT-8.30 Sep 24,2002
164605 - 4 hours 30E30.prescales Start 28 End
20 SCL 70 (18/hour) Pauses 6 (1.3/hr) Live
77 L3Accept 33 Hz
164607 - 2.7 hours 17E30.prescales Start 20 End
17 SCL 94 (35/hour) Pauses 13 (5/hour) Live
47 L3Accept 17 Hz
Write a Comment
User Comments (0)
About PowerShow.com