Hole Saws

1
Hole Saws
Available Hole Saw Sizes
Figure 1. Hole saw location cabinet 3 behind
collets
Steps for Use 1. Determine diameter and location
of desired hole. 2. Determine the appropriate
speed for cutting based on hole saw diameter.
These speeds can be found on the Mill/Lathe/Drill
Press Speed Charts. 3. For the larger hole saws
snap the tightening collar down to prevent over
tightening. Use the pilot drill with out
tightening collar for smaller hole saws. 4.
Insert appropriate hole saw into drill press or
mill. 5. Secure work piece on wood or something
that can be cut. 6. Cut work piece using oil for
lubrication. 7. De-bur edges to prevent cuts. 8.
Clean up and put tools away.
Figure 2. Hole Saws