U'R' Machinery Pty Ltd Grape Harvesters

1
U.R. Machinery Pty LtdGrape Harvesters
Welcome to the TellusVirtual Terminal Interface
2
1.0 Introduction

• The buttons around the edge of the LCD panel are
  called soft-keys.
• For this presentation they are labelled SK-1 to
  SK-10.
• These access the available data as depicted by
  the screen icons.

3
1.0 Introduction
1.1 Description of the Tellus Keys

• The power button - turns the virtual terminal
  on/off. Not the harvester, only the screen.
• Scrolls the cursor to the left one space at a
  time, when in a selected user enterable field.
• Scrolls the cursor to the right one space at a
  time, when in a selected user enterable field.
• Access the virtual terminal screen settings.
• Increases the value of a selected field. Or, if
  field not selected, increases the display
  brightness.
• Decreases the value of a selected field. If a
  field not selected, decreases the display
  brightness.

4
1.0 Introduction
1.1 Description of the Tellus Keys

• Escape, can be used while editing a value or to
  revert to the original value.
• Accepts the changes made to the user enterable
  fields.
• Free function keys, used on some implements. Not
  used on the 1000-series grape harvester.

5
1.0 Introduction
1.2 Harvester Soft-key Icons

• Home - returns to the road mode/harvest mode
  screen.
• Next - scrolls to the next page.
• Previous - scrolls to the previous page.
• Help - goes to the joystick switch information
  page.
• Spanner - goes to the service pin page.
• Looking glass - goes to the electrical
  diagnostics.

6
1.0 Introduction
1.2 Harvester Soft-key Icons

• Engine diagnostics -goes to the engine
  diagnostics page.
• Goes to the memory settings screen. 3 memory
  banks are available to store machine settings.
  Hold for 5 seconds until a double beep sounds.
  The red dot shows which memory bank is used.
• Field reports - goes to the harvester field
  report page.
• Numeric - when selected displays the actual RPM
  values on the harvester mode screen.
• Cruise control - sets the cruise control ON.
• Park brake - when the park brake is in manual
  mode this soft key turns the park brake on/off.

7
1.0 Introduction
1.3 Joystick Switch Information
8
2.0 Operation
2.1 Road Mode
9
2.0 Operation
2.1.1 Drive
2.1.2 Park Brake
10
2.0 Operation
2.1.3 Level Indictor
2.1.4 Engine
11
2.0 Operation
2.1.5 Gauges
12
2.0 Operation
2.1.6 Miscellaneous
13
2.0 Operation
2.2 Harvester Mode
14
2.0 Operation
2.2.1 Gauges
2.2.2 Harvester Functions
15
2.0 Operation
2.2.2 Harvester Functions
16
3.0 Harvesting Field Records
17
3.0 Harvesting Field Records
18
4.0 Memory Pre-set Setting
19
5.0 Engine Diagnostics
20
5.0 Engine Diagnostics
21
6.0 Electronic Settings
6.1 Service Pin
22
6.0 Electronic Settings
6.2.1 Operation
23
6.0 Electronic Settings
6.2.2 Alarms
24
6.0 Electronic Settings
6.2.3 Picking Head
25
6.0 Electronic Settings
6.2.4 Conveyors
26
6.0 Electronic Settings
6.2.5 Cleaning Fans
27
6.0 Electronic Settings
6.2.6 Ramps
28
6.0 Electronic Settings
6.2.7 Levelling
29
6.0 Electronic Settings
6.2.8 Engine
30
6.0 Electronic Settings
6.2.9 Drive
31
6.0 Electronic Settings
6.2.10 Calibrations
32
6.0 Electronic Settings
6.2.11 Terminal Configuration
33
6.3 Electrical Diagnostics
6.3.1 USP - ECU Module (Chassis Info)
34
6.3 Electrical Diagnostics
6.3.2 UM1 - ECU Module (Harvester Info)
35
6.3 Electrical Diagnostics
6.3.3 Side Console
36
6.3 Electrical Diagnostics
6.3.4 Joystick
37
6.3 Electrical Diagnostics
6.3.5 Back Operators Panel
38
7.0 Screen Settings
39
7.0 Screen Settings
7.1 VT Settings Soft Key Icons
40
7.0 Screen Settings
7.1.1 Configuration
41
7.0 Screen Settings
7.1.1 Configuration
42
8.0 Glossary
43
8.0 Glossary
44
End of presentation!Thank you for your
participation.