The New SafEye Xenon 800 IR Open-Path Gas Detector

1
The New SafEye Xenon 800IR Open-Path Gas Detector
2
Open Path Gas Detection

• Fast detection of a wide range of hydrocarbons
• Measures gas cloud concentration over many
  meters
• Proven, reliable gas detection technology

3
Applications

• Indoor and outdoor installations for
• Offshore oil gas exploration and production
• Fence line emission monitoring at
  industrial sites
• Petrochemical storage areas
• LNG/LPG storage, pumping, and filling
• Pipelines
• Paint booths and paint production
• Bus terminals natural gas powered vehicles

4
LEL Meter Concept

• 1 LEL meter a cloud of 5 methane (100
  LEL) gas that is one meter across.

5
LEL Meter Concept

• 1 LEL meter a cloud of 0.25 methane
• (5 LEL) gas that is twenty meters across.

6
New Features

• Advanced Xenon Flash source
• Improved operation with up to 90 signal
  reduction
• Improved, low-profile stainless steel housings
  w/swivel mounts
• Heated detector and source optics

7
New Features

• Explosion-proof enclosure
• Data port (I.S. approved)
• Heated optics
• Small (robust) footprint swivel mount

8
Swivel Mount Unit
thumb screws for easy alignment
mounting plate
9
Intrinsically Safe Hand-Held Kit
General Purpose Hand-Held Kit
carrying case
shoulder strap
intrinsically safe PDA
PDA charger
IR module
general purpose PDA
10
New Features

• 3mA maintenance call early warning of
  preventative maintenance
• Programmable configuration and diagnostics via
  hand-held unit
• 3 year system warranty, 10-year lamp warranty

11
Product Features

• High sensitivity and fast response to hydrocarbon
  gases
• Detection range up to 120 meters
• Simple installation, alignment and functional
  check
• One-person commissioning

12
Product Features

• Alignment Kit

filter to check functionality
telescope
Allen wrenches
13
Product Features

• Gases detected
• simultaneous detection of flammable gases C1-C8
• Models available specifically for LPG, methane,
  natural gas and ethylene

14
Product Features

• Dual-spectrum reference sensor, triple optics
  detector
• Immune to industrial environments including solar
  radiation
• Continuous operation in extreme environmental
  conditions
• Operational integrity with up to 90 reduction in
  signal
• No interconnecting cable between source and
  detector

15
SafEye Xenon 800 Optical System
16
Specification

• Sensitivity Range 0 - 5 LEL. m (optional 0-2
  LEL. m)
• Displacement/Misalignment tolerance to fault ?
  1?
• Response time lt 3 seconds
• Temperature Range -40? C to 55º C

17
Specification

• Warranty 3 years for the complete system
• 10 years for Xenon Flash Lamp
• Explosion proof Class I, Div. I, Groups
  A-D, Class I, Div. 2, Groups A-D
• Approvals U.S., Canada, Europe, Australia
• IP Rating IP66 and IP67
• Environmental meets MIL-STD-810C for
  humidity, salt, fog, vibration, mechanical
  shock, high/low temp

18
Electrical Specification

• Power supply 24 VDC nominal (18 - 32 VDC)
• Power consumption
• Detector 150mA _at_ 24 VDC
• Source 100mA _at_ 24 VDC(detector/source 300mA
  peak includes heated optics)
• Electrical connection 2 x M25 x 1.5mm or 2 x
  ¾ 14 NPT

19
4- 20 mA Output Signals

• 4mA Zero
• 3mA Maintenance call early warning of
  preventative maintenance
• 2mA Obscuration/misalignment/beam block
• 1mA Zero calibration mode
• 0mA Fault

20
Maintenance Call

• Maintenance Call provides a 3mA output as a
  pre-warning maintenance signal. The SafEye Xenon
  800 Detector continues to function in this mode.
• 3mA output indicates
• Low signal
• Dirty window
• Misalignment
• Detector parameter at limit value

21
Communication Features

• RS-485 Modbus RTU communication
• Data communication with a host computer or
  universal controller
• Central monitoring from a network of up to 247
  addresses
• Can network 32 SafEye 800 Detector units
  (without repeaters)

22
SafEye Xenon 800 Detector

• HAND-HELD DIAGNOSTIC KIT

23
Hand-Held Unit Features

• A diagnostic/calibration/interrogation tool that
  allows one-person commissioning and maintenance
• Intrinsically safe connection provides easy and
  economical interface
• Quick and easy analysis of system status

24
Hand-Held Unit Features

• On-site configuration of SafEye 800 Detector
  parameters
• Verify detector parameters during installation
• Recommended maintenance action to optimize the
  detectors performance.

25
SafEye Xenon 800 Detector HAND-HELD UNIT

• Detector operation
• Detector status
• Change setup
• Current gas reading
• Detector serial number
• Address (if networked)
• Many other diagnostic features

26
SafEye Xenon 800 Detector HAND-HELD UNIT

• Detector setup
• Select one of 4 standard gas calibrations
• Select full-scale range 0-5 or 0-2 LEL.m
• Select accessory relay activation at warning
  alarm level
• Select alarm relay latching option
• Detector address setting

27
SafEye Xenon 800 Detector HAND-HELD UNIT

• Detector maintenance
• Verify the detector installation range
• Recommended corrective actions
• Intensity of signal and gain
• Signal-to-noise ratio
• Signal-to-reference ratio
• LEL. M reading using an IR filter

28
SafEye Xenon 800 Detector HAND-HELD UNIT
Specification

• Intrinsically safe (general purpose version)
  certified Class I, Div. I, Groups A-D
• Extremely rugged dust/waterproof rated to IP65

29
The New SafEye Xenon 800Open Path Gas Detection
System

• The IR open-path detector for all environments
  applications