Extension Cord Safety - PowerPoint PPT Presentation

1 / 20
About This Presentation
Title:

Extension Cord Safety

Description:

A worker was electrocuted while cutting holes in drywall with a metal-cased router. ... A worker using an electric hammer to chisel was electrocuted. ... – PowerPoint PPT presentation

Number of Views:117
Avg rating:3.0/5.0
Slides: 21
Provided by: hin75
Category:

less

Transcript and Presenter's Notes

Title: Extension Cord Safety


1
Extension Cord Safety
2
Why does extension cord safety matter?
  • Extension cords are used on virtually all
    construction projects
  • Improper use can result in serious injury or
    death to users and other parties
  • OSHA regulations must be followed

3
Statistics
  • Approximately 4,000 emergency room level injuries
    related to extension cords occur each year in the
    United States (Consumer Product Safety Commission
    CPSC)
  • Approximately 2,000 of those injuries are the
    result of trips and falls due to extension cords

4
Statistics
  • Approximately 3,300 residential fires begin with
    extension cords each year
  • About 270 people are injured each year in
    residential fires due to extension cord misuse
  • About 50 fatalities occur each year due to
    residential fires caused by improper extension
    cord use

5
Statistics
  • Between 1991 and 2004, there were at least 46
    extension cord related fatalities recorded by
    OSHA.
  • Most fatalities were the result of electrocution.

6
Related Accidents
  • In every OSHA recorded fatality involving
    electrocution with extension cords
  • GFCIs were not used
  • Ungrounded cords were often used
  • Damaged cords were often used
  • Modified cords were often used
  • Extension cords were often improperly used

7
Related Accidents
  • A worker was electrocuted while cutting holes in
    drywall with a metal-cased router. The power
    supply cable had been spliced from a
    three-conductor cord (grounded) to a
    two-conductor cord (ungrounded). The circuit did
    not have a GFCI.

8
Related Accidents
  • A roofer was electrocuted while using an electric
    drill. The drill was plugged into two 100
    extension cords. Both had missing grounding
    blades on their plugs. One cord had been
    improperly spliced and had no insulation.

9
Related Accidents
  • A worker using an electric hammer to chisel was
    electrocuted. The extension cord used was not
    rated for hard use and had a removed ground
    blade. The tools power cord did not provide
    strain relief. There was no GFCI in place.

10
OSHA Regulations
  • 1926.404
  • Ground Fault Circuit Interrupters (GFCIs) shall
    be used on all receptacles that are not part of
    the permanent wiring of the construction project
  • The employer shall implement an assured equipment
    grounding conductor program

11
GFCI Receptacle
Grounded Extension Cords
12
OSHA Regulations
  • 1926.405
  • Temporary wiring shall be removed immediately
    upon completion of construction
  • Receptacles shall be grounded
  • Cords and cables must be protected from damage
  • Extension cords shall be designed for hard or
    extra-hard usage

13
OSHA Regulations
  • 1926.416
  • Worn or frayed electric cords or cables shall
    not be used.
  • Do not fasten extension cords with staples, hang
    extension cords by nails, or suspend extension
    cords by wire

14
(No Transcript)
15
Proper Safety Procedures
  • Only use extension cords when necessary
  • Always use extension cords rated adequately for
    the job to be performed
  • Inspect extension cords frequently
  • Replace worn or damaged extension cords
    immediately

16
Proper Safety Procedures
  • Place extension cords such that they will not be
    damaged and do not pose a trip hazard. Use a
    guard if necessary.

17
Proper Safety Procedures
  • Only use grounded extension cords for
    construction purposes
  • If an extension cord becomes hot or the plastic
    softens, stop use immediately and switch to a
    higher rated extension cord
  • Use care when inserting or removing extension
    cord plugs

18
Proper Safety Procedures
  • If receptacles are not equipped with GFCIs, use a
    GFCI equipped extension cord if the circumstances
    call for a GFCI

19
Proper Safety Procedures
  • Extension cords should only be used for temporary
    purposes
  • Do not affix extension cords with staples, nails,
    or wires that may damage the cord
  • Never tamper with or modify extension cords

20
For More Information
  • http//www.bmillerengineering.com/extensio.htm
Write a Comment
User Comments (0)
About PowerShow.com