SVT Trigger Database Related Issues Xin Wu

1
SVT Trigger Database Related IssuesXin Wu

• SVT provides a list of tracks to the L2
  processors
• normally no user selectable parameters/cuts
• possible two different pattern recognition
  algorithms for low and high L1 rate triggers
• but algorithm related parameters need to be
  loaded
• most of the parameters are stable
• Database requirements
• FPGA programs small and stable ( MBytes)
• on board storage Flash RAM, EPROM
• off board storage hardware database?
• version number of program in use trigger
  database?
• Algorithm related hardware memories, parameters
  ? next pages

2
Algorithm Related Hardware Memories and
Parameters

• Affect trigger performance (efficiency and fake
  rate)
• some need to be modified when beam conditions
  change
• no experience yet, to be seen!
• should be accessible also by offline (Trigsim)
• Therefore belong to the Trigger Database (actual
  files or pointers)
• Hardware memories on SVT boards
• 36 Hit Finders PEDRAM, CRAM
• 12 Hit Buffers SSMAP, AMMAP
• 12 AM Sequencers (12) SSMAP, ?Seq_RAM
• 24 AM Boards AM_patterns
• 12 Track Fitters SS_MAP, MAKE_ADDR, P0RAM,
  COERAM, CHI2_RAM

3
Hit Finder Hardware Memories and Parameters

• PED_RAM pedestals and thresholds
• ALTERA chip internal SRAM
• channel pedestal 7-bit, 1K?10 streams/board ?
  360 KB total
• chip threshold and cluster charge cut 3Byte/chip
  ? 8.4 KB total
• max of clusters 1 Byte/stream ? 360 Bytes
  total
• of chips 1 Byte/stream ? 360 Bytes total
• CRAM look-up table for cluster finding
• Static RAM
• 6 bits, 32K ?10 streams, same for all boards ?
  320 KB total
• Stream number to barrel/layer map
• ALTERA chip internal SRAM
• 6 bits, 10 Byte/board ? 360 Bytes total

4
HB/AMS/AMB Hardware Memories and Parameters

• SSMAP (hb) hit to super-strip look-up table
• DRAM
• 15-bit, 128K/board ? 3 MB total
• AMMAP (hb) road to Super-Strip list look-up
  table
• DRAM
• 16-bit, 1 M/board ? 24 MB total
• SSMAP (ams) same as SSMAP of hb
• ?Seq_RAM (ams) microsequencer RAM
• DRAM
• 24-bit, 128k/board, same for all boards ? 512 KB
  total
• maxRoad and empty layer register (ams)
• 12-bit register ? 2 B total
• AM_patterns (amb) AM patterns
• AM chips 128 chips/board, 128 patterns/chip
• 12-bit, 6 /pattern ? 192 KB/board ? 4.5 MB total

5
Track Fitter Hardware Memories and Parameters

• SS_MAP edge positions of super-strips in a road
• DRAM
• 24-bit, 32K/board ? 1.125 MB total
• MAKE_ADDR map to appropriate fitting parameters
• DRAM
• 13-bit, 16K/board ? 384 KB total
• P0RAM(intercept memory) track parameters at the
  edge position
• Flash Ram
• 14-bit, 6M/board ? 144 MB total
• COERAM (coefficient memory) coefficients of
  multiplication
• ALTERA chip internal SRAM
• 67-bit, 900/board ? 95 KB total
• CHI2_RAM (?2 memory) look-up table to calculate
  the square of ?
• ALTERA chip internal SRAM
• 10-bit, 64/board, same for all boards ? 128 Bytes
  total

6
Track Fitter Hardware Memories and Parameters
(Cont.)

• Shift control registers control shifting
  distance after multiplications
• 15-bit, 6/board, same for all boards ? 12 Bytes
  total
• ? cuts registers cut on fitted ?1, ?2, ?3
• 17-bit, 1/board, same for all boards ? 3 Byte
  total

7
Summary

• Need large disk space to store hardware memory
  files
• P0RAM (144 MB), AMMAP(24MB), AM_pattern(4.5MB),
  SSMAP(3MB) ? 200MB
• No frequent change necessary, if beam stable!
• but version numbers should be recorded for each
  run for offline use
• Amount of down loading at run start-up is less
• Hit Finder and Track Fitter have Flash RAMs and
  Static RAMs
• need to down load
• AMMAP(24MB), AM_pattern(4.5MB), SSMAP(3MB), ... ?
  40MB
• The details of the SVT database related issues
  will be discussed at a workshop in Pisa next week
  ? WE WILL BE BACK!