AERO CO2

1
AERO CO2

• The new wave in the hobbyrocket industry.
• Cheap, fun, and innovative.

2

AERO CO2 What is Aero CO2? How does it work?
(principles) How was it made? Why are you going
to buy an AERO CO2? What were the problems /
Solution?
3
What is the Aero CO2?
Aero CO2 is

• The newest addition to the air and spacehobby
  world.
• First CO2 canister propelled hobby rocket.
• Innovative Allows the userto design and build
  their ownaircraft.

4
The new addition to the hobby world.
-Could be called a variation on traditional hobby
rockets, but the ability to be more creative
makesthis new aircraft better. -This is not
truly meant for children, but is safe under
proper supervision. Recommended for older hobby
enthusiasts.
5
First CO2 canister propelled rocket.
-Have you ever seen a rocket propelled by a CO2
canister before?Well we couldnt find one. So
here we are to provide you with a new way to
have some fun. -Affordable way to launch a rocket
just For the fun of it. -No hassle to build
your own aircraft.
6
Innovative.
-Now you can be the head designer of your very
own aircraft. -With the supplied materials you
caneasily create any aircraft that you could
ever imagine. -Any shape, size, or color will
work, we just recommend it not being toolarge.
7
AERO CO2
The Aero CO2 will be sold for 19.99 CO2
canisters sold separately In comparison to
current rockets, the Aero CO2 is an affordable
way tohave fun with aero space, while
notconforming to a single style ofair craft.
8
How it works?

• Pressure difference
• Change in Momentum

9
Change in Momentum
(DeGode, 2002)
10
Pressure Difference
11
Safety precaution

• READ THE USER MANUAL.
• Use it outdoor.
• Do not heat the canister.
• When shooting, do not point the rocket at anybody
  or any structure.
• Keep the canisters away from small children.
• BEWARE of the spring.
• THIS IS IMPORTANT!

12
How we made it?

• CO2 canisters
• Wooden boards
• Cut it in to halves
• Join it with hinges and screws
• Had trouble make the two boards straight
• A block of wood
• Size
• We made two wholes to put the wooden sticks and
  another whole for the copper pipe

Materials
13

• Doors hinges
• Screws
• Copper pipe
• Wooden stick
• Mousetrap
• Angle indicator
• A small model plane
• Made it out of cartoon

14
First a flat wooden board was cut into half. The
two boards were joined together with screws and
hinges, so that it can swing. An angle indicator
was attached to the lower board. Using the
indicator and a pendulum bob we can find out the
angle between the two woods. Three holes were
made in the wooden block two small and a larger
one in the middle to attach the cooper rail and
the wooden sticks. The plane has to be placed on
the copper pipe (firing rail) and the two wood
sticks (guide rails) support the plane. Two holes
were drilled on the top of the wooden block to
install the firing pin. The wooden block was
attached to the upper board using glue and
screws. The hammer and the spring of a mousetrap
was taken out and placed at the end of the board
(where the angle indicator was placed). A trigger
was set so that the mousetrap can be fired from a
far range.
15
Why is it so good? -it makes your imagination
works (build your own airplane) -Creativity and
fun -it is cheap and we use quality
materials -very simple assembly it
16
why to buy it?
-not just entertainment also for educational
Purposes. -it a simulation of a real rocket