E166 Cables: Issues

1
E166 CablesIssues Requirements

• Gary Bower
• October 25, 2003
• E166 Collaboration Meeting_at_SLAC

2
Cable routes

• From/To
• IP1/Experimental area to 406/407
• Via
• long route old E144 cryogenics penetration on
  FFTB south wall near dump
• short route penetration on FFTB north wall near
  entry.
• Not much cable room in short route.

3
Distances

• Short route
• IP1 to 406/407 20-30m.
• Experimental area to 406/407 55-70m.
• Long route
• IP1 to 406/407 100-110m.
• Experimental area to 406/407 65-75m.

4
Nomenclature

• i6 IP1 406 long route.
• i7 IP1 407 long route.
• e6 Experimental area 406 long route.
• e7 Experimental are 407 long route.
• i6s IP1 406 short route.
• i7s IP1 407 short route.
• ER Experimental run.
• BR Background test run ER.

5
Cables Detectors
Detector Signal(route) //Foam8// HV(route) //RG-59//
SiWCal BR 12(e7) 2(e7)
Silicon-G10 BR 1(e7) 1(e7)
CsI (PMTpdiode) BR 9(e7) 3(e7)
Scintillator Paddle BR 1(e7) 1(e7)
Aerogel BR 2(e7) 2(e7)
PCAL(or equivalent) BR 4 (i7) 1(i7)
Clive BR 0 0
CsI ER 16-128(e7) 17(e7)
6
Cables Experimental devices - 1

• 2x Fe absorbers(for each) ER
• 2x Hall probes (RG59) e7
• 5x pickup coils(RG59) e7
• 2x 100A 30V DC power (2C2T6V) e6
• Spectrometer magnet ER
• 2x 100A 30V DC power (2C2T6V) e6

7
Cables Experimental devices - 2

• Undulator pulser ER
• 8A 1kV DC power (???) i6s
• Current monitor (Foam8) i6
• Trigger signal (Foam8) i6
• Tunnel cpu, camera BR
• ethernet (4PR20IS?) i7
• Spares BR
• 10x HV (RG-59) i7
• 10x signal(Foam8) i7

8
Cables Accelerator Devices - 1

• 3 strip line BPMs(for each) BR
• 4x signal (RG-223) i6s
• Wire scanner BR
• motor (12C18) i6
• LVDT (4PR24IS) i6
• Ion Chamber BR
• signal (Foam8) i7
• HV (RG-59) i7

9
Cables Accelerator Devices - 2

• Photon collimator(At) mover BR
• 2x motor (12C18) i6
• 2x LVDT (4PR24IS) i6
• 3x Profile monitor cameras(for each) BR
• video signal (RG-59) 2xe7,i7
• control (19C18TR) 2xe6, i6
• AC power 2xe6, i6?

10
Cables Accelerator Devices - 3

• Table mover BR
• 4x motor (12C18) i6
• 4x LVDT (4PR24IS) i6
• HSB2 BR
• 2x DC power (2C10T6V) i6
• Positron target ER
• in/out, status (RJ-11) e6