The momentum spread and longitudinal emittance calculation programmed - PowerPoint PPT Presentation

1 / 11
About This Presentation
Title:

The momentum spread and longitudinal emittance calculation programmed

Description:

The momentum spread and longitudinal emittance calculation programmed. by Adam Para using the Alvin Tollestrup technique has been implemented in ... – PowerPoint PPT presentation

Number of Views:28
Avg rating:3.0/5.0
Slides: 12
Provided by: beamsdi
Category:

less

Transcript and Presenter's Notes

Title: The momentum spread and longitudinal emittance calculation programmed


1
The momentum spread and longitudinal emittance
calculation programmed by Adam Para using the
Alvin Tollestrup technique has been implemented
in the TeV SBD by Bob Flora. The RF is read live
(as is the beam energy). The values are reported
in TSBDPMS0 - 36 - Momentum spread for
protons rms TSBDAMS0 - 36 - Momentum
spread for antiprotons TSBDPLS 0 - 36 -
Longitudinal emittance (?) for protons TSBDALS
0 - 36 - Longitudinal emittance (?) for
antiprotons 0 is the aggregate bunch 1 - 36 are
the individual bunches
2
proton bunchlength
pbar bunchlength
proton RF
pbar RF
proton dp/p
pbar dp/p
Tevatron SBD outputs for store 3953, including RF
trip
3
pbar bunchlength
proton bunchlength
pbar dp/p
proton dp/p
pbar emittance
proton emittance
beam energy
beam energy
Plots of emittance and momentum spread before and
after ramp showing that the emittance reported
does not change much between 150 and 980
4
SBD parameters during store 3953
proton bunch length
pbar bunch length
pbar emittance
proton emittance
proton dp/p
pbar dp/p
Note AS POINTED OUT BY V. SHILTSEV, THE
EMITTANCES CANNOT CHANGE AS SHOWN. THERE WAS A
BUG AT THIS TIME - SEE NEXT.
5
After the problem with the emittances changing
when the RF tripped was pointed out, a bug was
found and corrected in the code and the changes
in emittance reported when another RF trip
occurred have been removed. (The bug would
only show up when the RF was not at the nominal
value.)
6
ACNet Displays of bunchlength and dp/p arrays
(D27)
proton bunches 1 - 36
bunchlength
dp/p
Proton bunchlength and momentum spread arrays
7
pbar bunches 1 - 36
dp/p
bunchlength
Antiproton bunchlength and momentum-spread arrays
8
Preparations for the OAC Step 1 Transfer bunch
profile data from TeV SBD via ACNET
TSBDPBS0 - 3514 is array of 95 samples (_at_ 5
GHz) for 37 proton bunches TSBDABS0 - 3514 is
array of 95 samples (_at_ 5 GHz) for 37 antiproton
bunches
aggregate bunch
aggregate bunch
pbar bunches 1 - 36
proton bunches 1 - 36
9
TeV SBD Bunch Signal Data for OAC
Aggregate
36 Bunches
10
pbar Aggregate Bunch Signal Data
Proton Aggregate Bunch Signal Data
200 pS Samples
200 pS Samples
Mean Centered
Mean Centered
11
Every 30 Minutes
Successive (each 30 minutes) antiproton
aggregates The hole is when the RF tripped and
the bunchlength jumped
Write a Comment
User Comments (0)
About PowerShow.com