Patch Panel 0(PP0)

1
Patch Panel 0(PP0)
PP0 region. All services break here
X-section through service panels
3-D view of panels
Service panels run from detector end to end of
support tube
2
PP0 Region

• Detector end of service panel

Optoboards
PPO Flex Boards connect Electrical cables from
modules to Optical electrical services
Type 0 cables plug into PP0
3
PP0 and Opto-Board Prototype
Loop-back test through opto-board
4
First Mechanical Prototype

• Service panel mockup

5
PP0 Status

• PP0 prototype v2 flex has been fabricated.
• In use for prototype opto-board test.
• Single PP0 flex will be laminated to PCB for
  initial system tests. This will largely validate
  electrical design.
• Many flexes will be laminated to composite panel
  as part of full service panel prototype.
  Composite panel under fabrication, lamination in
  January.
• Full service panel prototype will include
  soldering of Type I cables to PP0 prototypes.
  This will be completed by summer 2003.
• By summer 2003 should also have results from
  system tests.
• PP0 FDR in June 2003(along with service panels).
  PRR a few months later.