TG4a Opening Report - PowerPoint PPT Presentation

About This Presentation
Title:

TG4a Opening Report

Description:

Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) ... Address [2514 E. Maddox Rd., Buford, GA 30519 USA.] Voice:[1-770-271-0529] ... – PowerPoint PPT presentation

Number of Views:20
Avg rating:3.0/5.0
Slides: 11
Provided by: PatKi7
Learn more at: https://mentor.ieee.org
Category:
Tags: maddox | opening | report | tg4a

less

Transcript and Presenter's Notes

Title: TG4a Opening Report


1
Project IEEE P802.15 Working Group for Wireless
Personal Area Networks (WPANs) Submission Title
TG3c Opening Introduction Date Submitted 18
September 2006 Source Reed Fisher
Company Oki Electric Industry Co., Ltd.
Address 2514
E. Maddox Rd., Buford, GA 30519 USA.
Voice1-770-271-05
29
E-Mailreedfisher_at_bellsouth.net Re
AbstractDescription of TG3c September 2006
meeting proceedings PurposeIntroductory
opening message to the TG-3c meeting
attendees Notice This document has been
prepared to assist the IEEE P802.15. It is
offered as a basis for discussion
and is not binding on the contributing
individual(s) or organization(s). The material
in this document is subject to
change in form and content after further study.
The contributor(s) reserve(s) the
right to add, amend or withdraw material
contained herein. ReleaseThe contributor
acknowledges and accepts that this contribution
becomes the property of IEEE and
may be made publicly available by P802.15.
2

TG3c 9th Meeting, Melbourne Opening Introduction
September 19, 2006
3
PAR TG3c Title
  • Millimeter-wave based Alternative Physical
    Layer Extension for IEEE Standard 802.15.3-2003
    titled Part 15 Wireless Medium Access Control
    (MAC) and Physical Layer (PHY) Specifications for
    High Rate Personal Area Networks (WPANs)

http//standards.ieee.org/board/nes/projects/802-1
5-3c.pdf
4
PAR TG3c Scope
  • This project will define a 25 to 100 GHz
    (millimeter wave) alternative PHY clause for
    higher data rate amendment to Standard
    802.15.3-2003. This frequency range allows for
    the USA and Japanese unlicensed allocations and
    expected unlicensed allocations in other
    countries. Data rates will be at least 1 Gbps
    under normal operating conditions with a typical
    range no less than 10meters

5
PAR TG3c Purpose
  • The purpose is to standardize an alternative PHY
    that can achieve higher data rate transmission,
    higher spectral re-use via optional directional
    antennas, and superior coexistence than existing
    802.15.3 wireless system. Multiple data rates
    will be offered. Data rates of at least 1 Gbps,
    will satisfy an evolutionary set of consumer
    multi-media industry needs for WPAN
    communications.
  • Additional Explanatory Notes (Excerpted)
  • High data rates of more than 2Gbps will be
    required for simultaneous time dependent
    applications such as multiple HDTV video streams
    without sacrificing the requirements for low
    complexity and low power consumption

6
IEEE-SA Standards Board Bylaws on Patents in
Standards
  • 6. Patents
  • IEEE standards may include the known use of
    essential patents and patent applications
    provided the IEEE receives assurance from the
    patent holder or applicant with respect to
    patents whose infringement is, or in the case of
    patent applications, potential future
    infringement the applicant asserts will be,
    unavoidable in a compliant implementation of
    either mandatory or optional portions of the
    standard essential patents. This assurance
    shall be provided without coercion and prior to
    approval of the standard (or reaffirmation when a
    patent or patent application becomes known after
    initial approval of the standard). This assurance
    shall be a letter that is in the form of either
  • a) A general disclaimer to the effect that the
    patentee will not enforce any of its present or
    future patent(s) whose use would be required to
    implement either mandatory or optional portions
    of the proposed IEEE standard against any person
    or entity complying with the standard or
  • b) A statement that a license for such
    implementation will be made available without
    compensation or under reasonable rates, with
    reasonable terms and conditions that are
    demonstrably free of any unfair discrimination.
  • This assurance shall apply, at a minimum, from
    the date of the standard's approval to the date
    of the standard's withdrawal and is irrevocable
    during that period.

Approved by IEEE-SA Standards Board March 2003
(Revised March 2005)
7
Inappropriate Topics for IEEE WG Meetings
  • Dont discuss the validity/essentiality of
    patents/patent claims
  • Dont discuss the cost of specific patent use
  • Dont discuss licensing terms or conditions
  • Dont discuss product pricing, territorial
    restrictions, or market share
  • Dont discuss ongoing litigation or threatened
    litigation
  • Dont be silent if inappropriate topics are
    discussed do formally object.
  • If you have questions, contact the IEEE-SA
    Standards Board Patent Committee Administrator at
    patcom_at_ieee.org or visit http//standards.ieee.org
    /board/pat/index.html
  • This slide set is available at
  • http//standards.ieee.org/board/pat/pat-slideset.p
    pt

Approved by IEEE-SA Standards Board March 2003
(Revised March 2005)
8
WEB Online Attendance Registration
Please sign-in to the electronic attendance
system at every meeting you attend.
http//newton/bin/attendance.cgi/802.15
9
  • 800 Tuesday, September 19. Call to order.
  • TG3c Leadership Chair R. Fisher. vice
    Chairs A. Mathew Secretaries H. Ikeda,
    S.K Yong
  • 3. Ten 2-hour time slots are allocated

Sep. 19 (Tue) Sep. 20 (Wed) Sep. 21 (Thu)
AM1 X X X
AM2 X X
PM1 X X
PM2 X X X
10
Meeting Objectives
Completion of Channel model creation work Completion of Usage Model Document Reviewing System Requirements Document Reviewing and Issuing CFP document Discussion of TG3c Activity for next Meetings Revising Project Plan



11
TG3c Timeline
Write a Comment
User Comments (0)
About PowerShow.com