Ladder Safety Training

1
Ladder Safety Training
2
Placement

• Use the 4 to 1 ratio
• Inspect prior to use
• Place on level surfaces
• Secure in place
• Ensure fully opened
• Look for warning labels
• Ensure area around ladder is free from additional
  hazards
• Do not use a ladder in place of scaffolding

3
Use

• Always face the ladder when ascending or
  descending
• Use both hands going up/down
• Carry tools on a toolbelt
• Never stand on top 2 rungs
• Never sit on top of a stepladder
• Move the ladder to avoid over-reaching
• Check shoes to insure they are free of mud and
  grease

4
Ladder Maintenance

• All repairs shall be done professionally
• Inspections shall be conducted before each use
• Defective, broken or damaged ladders shall be
  pulled from service and tagged Dangerous. Do
  Not Use.
• The joints between the steps and siderails shall
  be tight
• All moving parts shall operate freely without
  binding
• All pulleys, wheels and bearings shall be
  lubricated frequently
• Rungs shall be kept free of grease and oil
• Rope that is badly worn or frayed shall be
  replaced immediately
• All ladders shall be equipped with slip resistant
  feet, free of grease and in good condition

5
Portable Wood Ladders

• All wood ladders shall be free of splinters,
  sharp edges, shake, wane, compression failures,
  decay and other irregularities
• Step ladders shall have a metal spreader or
  locking device of sufficient strength and size to
  hold the front and back when open
• Wood ladders shall not be painted except for
  identification marking

6
Portable Metal Ladders

• Inspect ladders immediately when dropped or
  tipped over
• Metal ladders shall not be used for electrical
  work nor in areas where they could contact
  energized wiring, circuits or equipment

7
Opportunity for Questions