R

1
ASSEMBLING
HEALTHY ROOF WENTILATION OF ROOF GUARANTED

• 1.Rafter
• 2.Maxi Classic
• .Maxi Folia
• Counter batten22x50
• Batten 35x50
• Gutter flashing
• Wentilation gap

MANTION IN MOSCIBRODY - POLAND
2
ASSEMBLING
Groove is suppported by tongue (makes on the same
time accurate gap for fastener)
Pre-punched and carefully dimensioned slots
(314mm c/c 28mm) makes possible thermal
movements.
Sometimes there is need to open seam under
assembly. Seam can be opened by wrenching the
seam to loosen it.
"Wronic" TR535 4.225
3
ASSEMBLING
Classic sheets must be fastened with two screws
at eave. The purpose of screws are to keep
Classic sheets firmly on sub-constructions in
case of wind suction loads.
4
ASSEMBLING
Classic sheets can be adjusted after locking the
seam. The ends of Classic can be peen even. The
best place to peen is seam. There have to be
placed f.e. a piece of plastic or wood when peen
to avoid dents.
5
ASSEMBLING
There is a possibility of nivelation the roof
flat level, stop screwing the sheet on right
distance from batten
6
ASSEMBLING
Classic sheets are fastened on every batten.
Although there is ventilating steel batten it is
recommended to use counter batten to ascertain
proper ventilation.