TAPING INSTRUCTIONS: DRIP TRAY

1

• TAPING INSTRUCTIONS DRIP TRAY

• IDENTIFY AREA
• CLEAN DRY SURFACE
• 3. CUT TAPE TO LENGTH
• 4. PEEL BACKING OFF TAPE
• 5. APPLY TAPE
• 6. TRIM EXCESS

2

• TAPING INSTRUCTIONS DRIP TRAY

Back Plate
Drip Tray
2X Seam To Tape, Both Sides Of Outlet
Outlet
3

• TAPING INSTRUCTIONS DRIP TRAY

Clean Surfaces To Bond With 5050 Mixture Of
Isopropyl Alcohol And Water, Wipe Dry
4

• TAPING INSTRUCTIONS DRIP TRAY

Cut Two Strips Of 1 In. 3M 5952 VHB Acrylic Foam
Tape Appr. 8-1/2 Lengths
5

• TAPING INSTRUCTIONS DRIP TRAY

Peel Off Backing
Adhesive Side
6

• TAPING INSTRUCTIONS DRIP TRAY

Apply Tape Starting Against Outlet To Seal Seam,
Sticky Side Down
7

• TAPING INSTRUCTIONS DRIP TRAY

No Gaps
Firmly Press Tape Along Seam, Both Surfaces. No
Visible Gaps Along Edge Of Tape
8

• TAPING INSTRUCTIONS DRIP TRAY

Trim Excess Tape Above Gasket
9

• TAPING INSTRUCTIONS DRIP TRAY

Left Side
Right Side
Job Complete
10
DRIP TRAY GASKET
Three sided gasket inside cover
Bottom strip of gasket removed
11
DRIP TRAY GASKET
Bottom strip added to Drip Tray
Overflow to Drain Tube
12
Additional information

• All instructions can be found on the ClimaCab
  Installation Guide DVD
• Instruction are also located online in video form
  at http//climacab.com/support.html