Changing of wheels

1
Changing of wheels

• Description of activities

2

• Setting a truck
• on the flat and hard ground

3
With the wedges the truck is put out of action
4
All the nuts are loosened and the hub covers are
taken
5
With a lift the vehicle is pick up
6
With the stand the truck is protected against
dropping on the ground
7
All nuts are unscrewed and the wheel is taken off
8
New wheel is prepared
9
The new wheel is assembled
10
We are turning the wheel very slightly with some
nuts (on the cross)
11
We are putting the hub covers and screwing the
remaining nuts

• We are screwing the nuts with a spanner that it
  has a specified moment
• We are screwing the nuts in the specified
  convertible way order

12
We are lowering the truck from the lift and the
wheel is tighten
13
We are checking the value of the pressure in the
wheel and refilling it if it is necessary
14
The truck is ready to go
15
Thank you for your attention
All the pictures were taken thanks to the
eneterprise MOTOHANDEL Address Siedlin near
Plonsk