Title: Introduction in Telecommunication 121009
1Introduction in Telecommunication(121009) Chris
Roeloffzen
Chair Telecommunication engineering (EWI) Floor
8 HOGEKAMP EL/TN building (north) Telephone 489
2804 E-mail c.g.h.roeloffzen_at_el.utwente.nl
2Today Lecture 6
Chapter 7 Angle Modulation Transmission
3Contents of the course
Lecture 1 - 3 Introduction Chapter 1
Introduction to Electronic Communications Chapter
2 Signal Analysis and Mixing Lecture 4 - 7
CW modulation Chapter 4 Amplitude modulation,
Transmission Chapter 5 Amplitude modulation,
Reception Chapter 6 Single-side banded
Communication Systems Chapter 7 Angle
Modulation Transmission Chapter 8 Angle
Modulation Receivers Lecture 8 - 11
Media Chapter 12 Metallic Transmission
Lines Chapter 14 Electromagnetic Wave
Propagation Chapter 15 Antennas Chapter 13
Optical Fibers Lecture 12 - 14 Digital
Communication Chapter 9 Digital
Modulation Chapter 10 Digital
Transmission Lecture 15 16 ????????????????? Fo
r specific information see www.el.utwente.nl/te/e
ducation/education.htm
4Chapter 7 Angle Modulation Transmission
- What is Angle modulation
- What is the difference between frequency and
phase modulation - What is direct and indirect modulation
- Deviation sensitivity, phase deviation,
modulation index - Bandwidth of angle-modulated wave
- Bandwidth requirements
- Phasor representation of angle-modulated wave
- Frequency up-conversion
- FM transmitters
- Angle modulation versus AM
5Angle modulation
?inst(t) instantaneous phase (radians) Questio
n What is the instantaneous frequency?
6Angle modulation
vanglemod (t) angle modulated wave (Volt) Vc
peak carrier amplitude (Volt) ?inst
instantaneous angular frequency (rad/sec) ?inst
instantaneous phase (radians)
7Phase modulation
The instantaneous phase of a harmonic carrier
signal is varied in such a way that the
instantaneous phase deviation i.e. the difference
between the instantaneous phase and that of the
carrier signal is linearly related to the size of
the modulating signal at a given instant of time.
8Phase modulation
The instantaneous phase of a harmonic carrier
signal is varied in such a way that the
instantaneous phase deviation i.e. the difference
between the instantaneous phase and that of the
carrier signal is linearly related to the size of
the modulating signal at a given instant of time.
Kp is the phase deviation sensitivity (rad/Volt)
9Frequency modulation
The frequency of a harmonic carrier signal is
varied in such a way that the instantaneous
frequency deviation i.e. the difference between
the instantaneous frequency and the carrier
frequency is linearly related to the size of the
modulating signal at a given instant of time.
10Frequency modulation
The frequency of a harmonic carrier signal is
varied in such a way that the instantaneous
frequency deviation i.e. the difference between
the instantaneous frequency and the carrier
frequency is linearly related to the size of the
modulating signal at a given instant of time.
Kf is the frequency deviation sensitivity
11PM
Kp is the deviation sensitivity
FM
Kf is the deviation sensitivity
TASK Make block diagrams of PM and FM modulators
12PM
Kp is the deviation sensitivity
Phase modulator
Modulating signal source
PM wave
Direct
Modulating signal source
Differentiator
Frequency modulator
PM wave
Indirect
13FM
Kf is the deviation sensitivity
Modulating signal source
Frequency modulator
Direct
FM wave
Integrator
Phase modulator
Modulating signal source
FM wave
Indirect
14Frequency modulation of single frequency signal
PM
FM
15PM and FM of sine-wave signal
Carrier
Modulating signal
?
?
16PM and FM of sine-wave signal
Carrier
Modulating signal
FM
PM
17Phase Deviation and Modulation Index
m is the peak phase deviation or modulation index
PM
(radians)
FM
(unitless)
18Frequency Deviation
FM
FM
PM
(peak) frequency deviation
dependent of the frequency
PM
(peak) frequency deviation
independent of the frequency
19PM and FM of sine-wave signal
20Bessel function of the first kind
m is the modulation index
FM
PM
is the Bessel function of the first kind
21Relation AM and angle mod
22Bessel function of the first kind
23Bandwidth requirements of Angle-mod waves
1 Low-index modulation (narrowband FM)
m lt 1 ( fm gtgtgt ?f )
(Hz)
2 High-index modulation (wideband FM)
m gt 10 (?f gtgtgt fm )
3 Actual bandwidth (look at Bessel table page 266)
where n is the number of significant sidebands
4 Carsons rule (approx 98 of power)
24Example
FM modulator ?f 10 kHz fm 10 kHz Vc 10
V fc 500 kHz
Draw the spectrum? What is the bandwidth using
Bessel table? What is the bandwidth using
Carsons rule?
25Example
?f 10 kHz fm 10 kHz Vc 10 V fc 500 kHz
m 1
Fig 7-7
26Phasor representation of Angle-mod wave
m lt 1 (narrowband FM)
Fig 7-9
27Phasor representation of Angle-mod wave
m gtgt 1 (Wideband FM)
Fig 7-10
28Average Power of Angle-mod wave
Instantaneous power in unmodulated carrier is
(W)
Pc carrier power (Watts) Vc peak unmodulated
carrier voltage (volts) R load resistance (ohms)
Instantaneous power in angle-mod carrier is
So the average power of the angle-mod carrier is
equal to the unmodulated carrier
29Frequency and Phase modulators Direct FM Modulator
Fig 7-16
30Linear integrated-circuit direct FM modulator
High-frequency deviations and high modulation
indices.
Fig 7-20
31Frequency up-conversion heterodyne method
With FM and PM modulators, the carrier at the
output is generally somewhat lower than the
desired frequency of transmission
Fig 7-24 a
32Frequency up-conversion multiplication
Fig 7-24
33Indirect FM Transmitter
Fig 7-27
34Indirect FM Transmitter
m lt 1
Fig 7-28
Problem !!!!!!
35Indirect FM Transmitter
m lt 1
Fig 7-28
?max m 1.67 miliradiance ? ?f14 Hz
Aim ?f 75 kHz and ft 90 MHz
36Armstrong Indirect FM Transmitter
Where are the frequency conversions ?
Fig 7-27
Aim ?f 75 kHz and ft 90 MHz
37Angle mod versus AM
- Advantages of Angle modulation
- Noise immunity
- Noise performance and signal-to-noise
improvement - Capture effect
- Power utilization and efficiency
- Disadvantages of Angle modulation
- Bandwidth
- Circuit complexity and costs
38End