xPCgear.com MCE Remote Control Transceiver Learning Procedure

1
xPCgear.comMCE Remote Control Transceiver
Learning Procedure
2
Press the Green LOGO on remote control to start
Windows MCE
3
Select settings from tasks
4
Select TV
5
Select Set Up TV Signal
6
Click Yes
7
Click Next
8
Confirm your region and click Next
9
Download Failure will show if you are not
connected to the Internet
10
Select Cable
11
Yes
12
Click Next
13
Select Enter Channel and enter a random number
and then click Scan again
14
Select Next
15
Select Yes and then click Next
16
Click Next
17
Follow these instructions to setup your new MCE
Remote Control from xPCGear.com
18
Select the second option and then click Next
19
Click Next
20
Yes, it does and Next
21
Follow the instructions to operate the remote
control you want to learn (Please aim the remote
control at the receiver)
22
Click Next
23
Select the option by your requirement
24
Select the option by your requirement
25
Test if the channel changing is correct
26
If it is correct, click Next
27
Press Chl Chl- to change channel
28
Click Next
29
Congratulations! You are done!