CEMENT STABILIZATION OF ROADS - PowerPoint PPT Presentation

1 / 9
About This Presentation
Title:

CEMENT STABILIZATION OF ROADS

Description:

Investigate the influence of the new SABS EN 197-1 cement specifications on the ... Laboratory test programme. Initial programme was to: Test five suitable materials ... – PowerPoint PPT presentation

Number of Views:158
Avg rating:3.0/5.0
Slides: 10
Provided by: csi97
Category:

less

Transcript and Presenter's Notes

Title: CEMENT STABILIZATION OF ROADS


1
CEMENT STABILIZATION OF ROADS
  • CSIR Transportek
  • Frank Netterberg
  • Soillab
  • (CCI Steering Committee)

2
Terms of Reference
  • Consortium was contracted by the Cement and
    Concrete Institute (CCI) on behalf of its
    members to
  • Investigate the influence of the new SABS EN
    197-1 cement specifications on the use of cement
    as a road material stabilizer (ie is TRH 13 still
    appropriate).

3
Progress
  • Interviews within the industry (completed)
  • Design laboratory test programme (completed)
  • Carry out laboratory testing (commencing shortly)
  • (First material identified and being collected)
  • (Cements being organised)

4
Laboratory test programme
  • Initial programme was to
  • Test five suitable materials
  • Use 7 different cements
  • Study effect of
  • Time ?
  • Temperature ? on strength, workability
  • Cement composition ? and durability
  • This would require about R8 million and about 196
    tonnes of material

5
Revised programme
  • Seven cements
  • Two materials
  • Initially workability and strength to be assessed

6
Cements
Full range of standard and non-standard cement
tests on each cement
7
Materials
Dolerite (low plasticity index (PI lt 6)
Dolerite (medium-high PI (10 - 16)
Full range of standard and non-standard material
tests on each sample
8
Stabilisation tests
  • All tests at 3 cement and 100 Mod AASHTO
    effortMaterials compacted after 2 and 4
    hoursMaterials conditioned at 10, 23 and
    45ºCCured for 7 days at 23C and 95-100
    humidity Tested for density and strength (CBR,
    UCS and ITS)

9
Proposed programme
  • Initiate material testing Mid November 2002
  • Complete initial tests End February 2003
  • Report End March 2003
Write a Comment
User Comments (0)
About PowerShow.com