Internet Control Message Protocol

1
Internet Control Message Protocol

• By
• Venkata Naga Chaturvedula
• Thomson Erelli
• Kiran Nukalapati

2
About the Internet Control Message Protocol

• The Internet Control Message Protocol (ICMP)
  protocol is classic example of a client server
  application.
• The Internet Control Message Protocol (ICMP) is
  part of the Internet protocol suite and defined
  in RFC 792
• The ICMP server executes on all IP end system
  computers and all IP intermediate systems (i.e
  routers).

3
About the Internet Control Message Protocol

• The protocol is used to report problems with
  delivery of IP datagrams within an IP network.
• It can be sued to show when a particular End
  system is not responding, when an IP network is
  not reachable, when a node is overloaded, when an
  error occurs in the IP header information, etc.
• The protocol is also frequently used by Internet
  managers to verify correct operations of End
  Systems and to check that routers are correctly
  routing packets to the specified destinations.

4
About the Internet Control Message Protocol

• The Internet Protocol (IP) is used for host-to-
• host datagram service in a system of
• interconnected networks called the Catenet.

• The network connecting devices are called
  
• Gateways.
• These gateways communicate between
• themselves for control purposes via a Gateway
  to
• Gateway Protocol (GGP).

5
About the Internet Control Message Protocol

• Occasionally a gateway or destination host will
  communicate with a source host, for example, to
  report an error in datagram processing.
• ICMP, uses the basic support of IP as if it
  were a higher level protocol, however, ICMP is
  actually an integral part of IP, and must be
  implemented by every IP module.

6
Purpose of ICMP The Internet Control Message
Protocol is a protocol for the exchange of error
messages and other vital information between
(Physical) Internet entities such as hosts and
routers.
7
ICMP in the TCP/IP protocol suite
ICMP is a network layer protocol, often it is
placed next to the IP protocol.
ICMP Header
ICMP Data Area
IP Header
IP Data Area
Frame Header
Frame Area
8
ICMP in the TCP/IP protocol suite

• ICMP lies just above IP, as ICMP messages are
• carried inside IP Packets.

• ICMP messages are carried as IP payload, just as
  
• TCP/UDP segments are carried as IP payload

• When a host receives an IP packet with ICMP
• specified as the upper layer protocol, it de-
  
• multiplexes the packet to ICMP, just as it
  would
• demultiplex a packet to TCP/UDP.

9

• ICMP functions
• Announce network errors such as a host or
  
• entire portion of the network being
  unreachable,
• due to some type of failure. A TCP or UDP
  packet
• directed at a port number with no receiver
• attached is also reported via ICMP.
• Announce network congestion When a
• router begins buffering too many packets, due
  to
• an inability to transmit them as fast as they
  are
• being received, it will generate ICMP Source
• Quench messages. Directed at the sender, these
  
• messages should cause the rate of packet
• transmission to be slowed.

10
ICMP functions

• Assist Troubleshooting ICMP supports an Echo
  function, which just sends a packet on a
  round--trip between two hosts. Ping, a common
  network management tool, is based on this
  feature. Ping will transmit a series of packets,
  measuring average round--trip times and computing
  loss percentages.
• Announce Timeouts If an IP packet's TTL field
  drops to zero, the router discarding the packet
  will often generate an ICMP packet announcing
  this fact. TraceRoute is a tool which maps
  network routes by sending packets with small TTL
  values and watching the ICMP timeout
  announcements.

11
ICMP Applications

• There are two simple and widely used applications
  which are based on ICMP
• Ping
• Traceroute.

12
ICMP Applications

• PING The ping utility checks whether a host is
  alive reachable or not. This is done by sending
  an ICMP Echo Request packet to the host, and
  waiting for an ICMP Echo Reply from the host.

• TRACE ROUTE Traceroute is a utility that
  records the route (the specific gateway computers
  at each hop) through the Internet between your
  computer and a specified destination computer. It
  also calculates and displays the amount of time
  each hop took.

13
ICMP Operation
14
ICMP datagram structure The ICMP datagram, being
an IP datagram, contains the usual IP header.
This is followed by an ICMP header which varies
slightly between the different types of ICMP
message. The general format is shown below
                                                  
                                                  
                                                  
                                 

15
ICMP Message Types
16
More about Message Types

• The DESTINATION UNREACHABLE message is used when
  the subnet or a router cannot locate the
  destination.
• The TIME EXCEEDED message is sent when a packet
  is dropped because its counter has reached zero.
  This event is symptom that packets are looping,
  that there is enormous congestion, or that the
  timer values are being set too low.
• The PARAMETER PROBLEM message indicates that an
  illegal value has been detected in a header
  field. This problem indicates a bug in the
  sending hosts IP software or possibly in the
  software of a router transited.
• The SOURCE QUENCH message was formerly used to
  throttle hosts that were sending too many
  packets. When a host received this message, it
  was expected to slow down. It is rarely used any
  more when congestion occurs.

17
More about Message Types

• The REDIRECT MESSAGE is used when a router
  notices that a packet seems to be routed wrong.
  It is used by the router to tell the sending host
  about the probable error.
• The ECHO and ECHO REPLY messages are used to see
  if a given destination is reachable and alive.
  Upon receiving the ECHO message, the destination
  is expected to send an ECHO REPLY message back.
• The TIMESTAMP REQUEST and TIMESTAMP REPLY
  messages are similar, except that the arrival
  time of the message and the departure time of the
  reply are recorded in the reply. This facility is
  used to measure network performance.

18
Code The exact meaning of the value contained
within this field depends on the message Type.
For example, with an ICMP Type 3 message
("Destination unreachable"), a Code value of 0
means "Network unreachable", which implies a
router failure. A Code of 1 means "Host
unreachable". Checksum The checksum field
provides error detection for the ICMP header only
and is calculated in the same way as the IP
header checksum. Parameters The usage of this
field depends on the type of message. For
example, Type 3 messages do not use this field,
while Type 0 and 8 messages use the field to
store an identifier and sequence
number. Data Typically, the data is the IP
header and first 64 bits of the original
datagram, i.e. the one that failed and prompted
the ICMP message. Including the first 64 bits of
the original datagram allows the ICMP message to
be matched to the datagram that caused it.
19
Destination Unreachable Codes
20
Redirect Codes
Time Exceeded Codes Parameter
Problem Codes
21
Testing and Troubleshooting Sequences for ICMP

• ICMPs most common uses are testing and
  troubleshooting.
• Two of the most well-known utilities, PING and
  TRACEROUTE, rely on ICMP to perform connectivity
  tests and path discovery.

22
Connectivity Testing with PING

• The PING utility is actually an ICMP Echo
  process.
• An ICMP Echo Request packet consists of an
  Ethernet header, IP header, ICMP header, and some
  undefined data.
• This packet is sent to the target host, which
  echoes back that data, as shown in Figure 4-1.
• The ICMP echo request is a connectionless process
  with no guarantee of delivery.

23
Connectivity Testing with PING (Contd.)

• Most PING utilities send a series of several echo
  requests to the target in order to obtain an
  average response time.
• These response times are displayed in
  milliseconds.
• These times should be considered a snapshot of
  the current round-trip time.
• The PING utility included with Windows 2000 sends
  a series of four ICMP echo requests with a
  one-second ICMP Echo Reply Timeout value

24
PING Utility Uses ICMP Echo Requests and Replies
25
Event Flow Diagram
26

• The echo requests consist of 32 bytes of data
  (an alphabetical pattern)
• in a fragmentable IP packet

Ping Utility provides feedback on success and
round-trip times
The command-line parameters used with PING can
affect the appearance and functionality of ICMP
Echo packets.
27
Path Discovery with TRACEROUTE

• The TRACEROUTE utility identifies a path from
  the sender to the target host using ICMP echo
  requests and some manipulation of the TTL value
  in the IP header.
• Traceroute starts by sending a UDP datagram to
  the destination host with the TTL field set to 1.
  If a router finds a TTL value of 1 or 0, it drops
  the datagram and sends back an ICMP Time-Exceeded
  message to the sender.
• Traceroute determines the address of the first
  hop by examining the source address field of the
  ICMP Time-Exceeded message.

28
Path Discovery with TRACEROUTE (Contd.)

• To identify the next hop, traceroute sends a UDP
  packet with a TTL value of 2. The first router
  decrements the TTL field by 1 and sends the
  datagram to the next router. The second router
  sees a TTL value of 1, discards the datagram, and
  returns the Time-Exceeded message to the source.
  This process continues until the TTL is
  incremented to a value large enough for the
  datagram to reach the destination host or until
  the maximum TTL is reached.
• To determine when a datagram reaches its
  destination, traceroute sets the UDP destination
  port in the datagram to a very large value that
  the destination host is unlikely to be using.
  When a host receives a datagram with an
  unrecognized port number, it sends an ICMP Port
  Unreachable error message to the source. The Port
  Unreachable error message indicates to traceroute
  that the destination has been reached.

29
Event Flow Diagram
30
Vulnerabilities
31
Vulnerability Note VU221164
Overview A vulnerability in some Cisco Virtual
Private Network (VPN) products could allow a
remote attacker to cause a denial of service.
Impact A denial-of-service condition can result
from degraded performance or unexpected rebooting
of the affected device Solution Cisco Systems
Inc. has released software patches and workaround
information for this vulnerability. Systems
Affected Vendor
Status Date Updated Cisco Systems
Inc. Vulnerable
May-8-2003 Credit Thanks to Cisco Systems
Product Security Incident Response Team for
reporting this vulnerability.
32
Vulnerability Note VU918920

• Overview
• A vulnerability exists in multiple control cards
  used by Cisco ONS devices. This vulnerability
  could allow a remote attacker to cause a
  denial-of-service condition.
• Vulnerable
• Cisco ONS 15327 Edge Optical Transport Platform
  releases
• 4.6(0) and 4.6(1)
• 4.1(0) to 4.1(3)
• Not vulnreable
• Cisco ONS 15600 Multiservice Switching Platform
• Impact
• A remote, unauthenticated attacker could cause
  control cards to reset on an affected optical
  device. Repeated exploitation of this
  vulnerability could result in a denial of
  service.
• Solution
• They have upgraded and released the newer
  versions.

33
Vulnerability Note VU471084
Overview The Linux 2.0 kernel contains a
vulnerability in the way it processes ICMP
errors. This could lead to portions of memory
being leaked to a malicious user.
Description The Linux 2.0 kernel (versions 2.0
through 2.0.39 inclusive) contains an error in
the calculation of the size for an ICMP citation.
A citation is created for ICMP error responses.
This miscalculation may lead to random data
stored in memory being returned in the response.
Impact Sensitive information may be leaked to
an attacker. Solution Upgrade or apply a patch
as necessary Credit Thanks to Philippe Biondi
of Cartel Security for reporting this
vulnerability.
34
Problem issues
35
Problems

• ICMP redirect messages can be used to trick
  routers and hosts acting as routers into using
  false'' routes these false routes would aid in
  directing traffic to an attacker's system instead
  of a legitimate trusted system.
• This could in turn lead to an attacker gaining
  access to systems that normally would not permit
  connections to the attacker's system or network.
• Older versions of UNIX could drop all connections
  between two hosts even if only one connection was
  experiencing network problems.

36
Extensions
37
Extensions

• In order to support IP-in-IP tunneling, extends
  the final field of selected ICMP messages to
  include a greater portion of the original
  datagram.
• An additional object is provided through which
  octets 129 and beyond can be appended to the ICMP
  message.

38
Extensions

• As few datagrams contain L3 or L4 header
  information beyond octet 128, it is unlikely that
  the extensions described herein will disable any
  applications that rely upon ICMP messages.

39
Security Issues
40
Security Issues with ICMP

• You can use ICMP as part of a reconnaissance
  process to learn about active network addresses
  and active processes
• These reconnaissance processes often precede a
  network break-in
• When hackers decide to infiltrate a network, they
  typically start with a list of the IP hosts on
  the network (unless the target is a single known
  system)

41
Security Issues for ICMP

• An IP host probe process is one method of
  obtaining a list of the active hosts on a network
• The next step in the hack is a port probe
• Once hackers know the addresses of the active
  devices on the network, they can target their
  next reconnaissance process, the port probe, to
  those devices
• Because many systems do not reply to pings sent
  to the broadcast address, typical IP host probes
  are sent unicast to each possible address

42
Security Issues

• ICMP messages must use an established SAID. From
  a destination host, this means an SAID must exist
  or be established on the fly even when an
  unprotected IP message is source of the ICMP
  message.
• Certain ICMP messages can legitimately arrive
  from any gateway along the route taken by an IP
  message from source to destination host. To
  protect the ICMP message, the source host must
  have an SAID withthat gateway. Potentially, this
  means a source host must have an SAID with
  every gateway through which its IP packets may
  pass.

43
Security Issues

• very serious attacks with ICMP and against
  routing protocols
• Solutions exists but are not applied!
• strict traffic filtering against IP source
  address spoofing (RFC 2267)
• education of the network managers
• cryptography key management protocols not
  generally adopted standard Public Key
  Infrastructure (PKI) not yet agreed upon

44
Summary
45
Summary

• ICMP provides vital feedback about IP routing and
  delivery problems
• Although ICMP messages fall within various
  well-documented types, and behave as a separate
  protocol at the TCP/IP Network layer, ICMP is
  really part and parcel of IP itself, and its
  support is required in any standards-compliant IP
  implementation

46
Summary

• Two vital TCP/IP diagnostic utilities, known as
  PING and TRACEROUTE (invoked as TRACERT in the
  Windows environment), use ICMP to measure
  round-trip times between a sending and receiving
  host, and to perform path discovery for a sending
  host and all intermediate hosts or routers
  between sender and receiver
• ICMP also supports Path MTU (PMTU) Discovery
  between a sender and a receiver, which helps to
  optimize performance of data delivery between
  pairs or hosts by avoiding fragmentation en route

47
Summary

• Route and routing error information from ICMP
  derives from numerous types of ICMP messages
• ICMP also supports route optimization through its
  ICMP Redirect message type, but this capability
  is normally restricted only to trusted sources of
  information because of potential security
  problems that uncontrolled acceptance of such
  messages can cause

48
Conclusion
49
Conclusion

• Although ICMP has great positive value as a
  diagnostic and reporting tool, those same
  capabilities can be turned to nefarious purposes
  as well, which makes security issues for ICMP
  important.
• Understanding the meaning and significance of the
  ICMP Type and Code fields are essential to
  recognizing individual ICMP messages and what
  they are trying to communicate.

50
Questions
1.Why Source Quench message is rarely used? Sol
When Congestion occurs, sending these packets
increases the congestion. 2.When are ICMP
Messages generated? Sol ICMP messages are
typically generated in response to errors in IP
Datagrams or for diagnostic or routing purposes.
3.What is the drawback of using the ping
command? Sol The ping command will send an
ECHO_REQUEST datagram to a host or network
interface. On reception, the packet is returned
with an ECHO_RESPONSE datagram. While this test
does not verify that your server is operating
correctly, it does verify that the networking
portion of it is reachable.
51
References

• http//www.faqs.org (RFC 792)
• http//www.ietf.org
• http//www.iss.net
• http//www.eventhelix.com
• Books
• Steven M. Bellovin. Security Problems in the
  TCP/IP Protocol Suite. Computer Communications
  Review
• Andrew S Tanenbaum, Computer Networks.