IEEE 802 Wireless Coexistence Study Group Update - PowerPoint PPT Presentation

About This Presentation
Title:

IEEE 802 Wireless Coexistence Study Group Update

Description:

Coexistence: The ability of one system to perform a task in a given shared ... TAG should begin work when the first WG ballot is published ... – PowerPoint PPT presentation

Number of Views:30
Avg rating:3.0/5.0
Slides: 10
Provided by: jiml173
Learn more at: https://ieee802.org
Category:

less

Transcript and Presenter's Notes

Title: IEEE 802 Wireless Coexistence Study Group Update


1
IEEE 802 Wireless Coexistence Study Group Update
Jim Lansford Jim.Lansford_at_mobilian.com (405)
377-6170
Sydney Interim Meeting Monday evening
2
Update for Sydney meeting
  • SEC conference calls held between meetings
  • Refine mission statement
  • Discussion of goals for anticipated TAG
  • Definition of Coexistence
  • Goals for Sydney meeting
  • Broader feedback
  • Further refinement of mission statement and goals
  • Finalize mission statement and charter
  • Proposed definition of coexistence
  • Start work on organization and voting rules
  • Prep for Vancouver plenary
  • Meets Monday PM _at_ 630 (w/TG2), Wed _at_1-3

3
Tasks the SG/TAG needs to accomplish
  • Develop Mission Statement (SG ongoing)
  • Statement of purpose (Recommend to ExCom how IEEE
    802 should address coexistence in existing and
    future specs) (SG ongoing)
  • Definition of coexistence (TAG)
  • Summary of current standards where coexistence is
    an issue (TAG)
  • Recommendations to SEC (SG July Plenary)
  • Summary and report (SG July Plenary)

4
Mission Statement
(Based on feedback from 1 May conference call)
  • The IEEE 802 Coexistence Technical Advisory Group
    (TAG) has the following missions
  • The COEX TAG develops and maintains the IEEE 802
    policy for establishing coexistence between
    Standards.
  • The COEX TAG develops and maintains guidelines
    for the communications industry to foster
    coexistence.
  • The COEX TAG evaluates the coexistence issues
    between IEEE 802 PARs and Draft Standards, and
    makes recommendations to the IEEE 802 Executive
    Committee.

5
Coexistence Definition
  • Coexistence The ability of one system to
    perform a task in a given shared environment
    where other systems have an ability to perform
    their tasks and may or may not be using the same
    set of rules.
  • Coexistence is quantified by degradation
    (simulated or measured) under a set of usage
    model assumptions, which must be defined for
    coexisting systems

6
QA 1
  • Will this group try to quantify coexistence?
  • Not likely coexistence depends on so many
    variables (geometry, power, etc.) that defining a
    number that says whether you have achieved it or
    not isnt practical.
  • What will this group do then?
  • We currently dont have a policy for addressing
    coexistence thats first. This policy will
    address the ground rules for analyzing the
    degradation two systems cause to each other (or
    pairs of systems for multiple standards).

7
QA 2
  • How would this work?
  • The TAG first defines policy. For example, the
    policy might be to say a WG needs to pick five
    usage models and determine the degradation due to
    a set of other approved standards, pairwise. We
    want to examine most likely scenarios, not corner
    cases, which may give pathological results.
  • So how would you know if two systems coexist?
  • The TAG is an advisory group to SEC analysis
    using the usage models would be used by WGs and
    SEC to make informed decisions. This is a
    similar concept to the FCCs OET. So the answer
    is that the TAG procedures will either convince
    voters that a Recommended Practice is needed, or
    that a draft has no coexistence issues and can
    proceed to further balloting.

8
QA 3
  • Does the TAG play a role other than formulating
    policy?
  • Possibly. The current thinking is that the COEX
    TAG develops a definition of coexistence and a
    policy to guide WGs analysis of coexistence.
    Beyond that, the TAG may be called upon to help
    resolve coexistence conflicts by writing an
    independent report when a draft is submitted to
    SEC, but this has not been agreed upon.
  • What about participation and voting?
  • A TAG is governed by the same attendance and
    voting rules as WGs, but the specifics are not
    finalized.

9
Proposed Operation
  • The Coexistence TAG is responsible for defining
    the meaning of coexistence within the IEEE 802
    context.
  • The Coexistence TAG will develop the guidelines
    by which WGs establish whether a given TG
    coexists.
  • Uses official definition
  • Uses usage models
  • Uses modeling and/or measurements
  • Recommends creation of a TG to develop a
    Recommended Practice, if needed (a la 802.15.2)
  • The Coexistence TAG will publish guidelines by
    which the industry can evaluate coexistence.
  • The Coexistence TAG is responsible for reviewing
    all proposed wireless PARs
  • Like FCC/OET, evaluates PARs and highlights those
    that may require a Recommended Practice
  • Summary report to be voted on by TAG
  • Summary report presented to SEC
  • SEC members take this summary under advisement
  • This TAG is responsible for generating a final
    review report of the Draft Standard prior to
    Sponsor Ballot
  • TAG should begin work when the first WG ballot is
    published
  • Preliminary report should be issued to SEC within
    40 days
  • Must be voted on by TAG
  • Must be ratified by SEC
  • SEC can require creation of a TG to write
    Recommended Practice
Write a Comment
User Comments (0)
About PowerShow.com