FS30 Ratio Adjustment

1
FS30 Ratio Adjustment
2
BRIXING AND RATIO

• Set water flow rate first with ratio
• cup at 15 ounces in 4 seconds.
• Set syrup ratio with separator
• (included with unit) and ratio cup
• Set injected syrup with ratio cup

Separator
Ratio Cup
3
SETTING WATER FLOW RATE
closed
open
Valve Block

• Shut off syrup (brand) supply to nozzle by
  closing
• shut-off at back block, disconnecting coil
  wire at
• plug connection or disconnecting BIB
  connector.
• Dispense water into the brix cup for 4 seconds
• Adjust to 15oz. of water in 4 seconds if needed

Flow Rate (3.75 oz./sec.) x 4 seconds
15.00 oz.
4
SETTING BRAND SYRUPS

• Remove valve nozzle and install
• syrup separator
• Adjust syrup flow rate (at module)
• so that water and syrup levels rise
• together in ratio cup. Adjust syrup
• module in (clockwise) to increase
• the flow or out (counter-clockwise)
• to decrease the flow.

Syrup
Water/Soda
5
SETTING INJECTED FLAVOR

• Shut off water (soda) and brand syrup at valve
  block
• Place ratio cup under nozzle
• Activate bonus, then brand button at valve for 12
  seconds.
• Adjust injected syrup flow to equal 2 oz. in 12
  seconds

closed
open
Valve Block
6
FS30 Ratio Adjustment
Return to Main Menu