HOW TO SETUP A SECURE NETWORK

1
HOW TO SETUP A SECURE NETWORK

• By
• Ajen Kansara

2
Table of Contents

• Introduction
• Accessing the Router
• Basic Wireless Settings
• Advance Wireless Settings
• Configuring the Router

3
Accessing the Router

• Different routers have different addresses on
  which you can access the router
• Each manufacture have their own default username
  and password
• Here are the addresses, usernames and passwords
  of most commonly used routers

Table 1 (Using Verizon router for this manual)
4
Accessing the Router

• Step 1) Enter the address corresponding to your
  router. (If the web page does not load,
  re-check the address and make sure it matches
  with the table 1)
• Step 2) Enter the username
• Step 3) Enter the password
• Step 4) Click OK to access the router

5
Basic Wireless Settings

• Step 1) Click on Wireless Setting

6
Basic Wireless Settings

• Step 2) Click on Basic Security Setting (follow
  Advance Setting for Advance Security Setting)

7
Basic Wireless Settings

• Step 3) Make sure Wireless is turned on
• Step 4) Assign SSID (Service Set Identifier),
  this will be the name of your wireless network
• Note We will be using AMK Network as network id

8
Basic Wireless Settings

• Step 5) Set the channel to Automatic
• Step 6) Select WEP

9
Basic Wireless Settings

• Step 7) Select either 64/40 bit or 128/104bit
  from letter A-F or any number 0-9(64 10 digits
  and 128 26 digits)
• Note We will be using 64/40 bit Hex with
  AFBEDC1928 as the password

10
Basic Wireless Settings

• Step 8) Confirm the settings listed and click
  Apply

11
Basic Wireless Settings

• Overview of the entire steps