Proton Driver Test Cryostat: Cost Estimation

1
Proton Driver Test Cryostat Cost Estimation
Approval Process

• Michael White
• Technical Division E F
• Fermi National Accelerator Laboratory

2
(No Transcript)
3
(No Transcript)
4
(No Transcript)
5
(No Transcript)
6
Cost Estimates
Category Total Cost
   
Vacuum Vessel 50,000.00
Magnetic Shielding 25,500.00
80 K Shield 9,000.00
He Reservoir 10,000.00
Valves 25,000.00
Heat Exchanger 7,000.00
Instrumentation 6,500.00
Piping 2,000.00
Bayonets 5,000.00
Relief System 4,000.00
   
Total 144,000.00
7
Design Review

• Before fabrication begins, design should be
  reviewed for
• Pressure and Vacuum Vessel Codes
• Relief System
• Model, Drawings, Specifications, and Flow
  Schematic

8
Design Review People

• Argonne ( Joel Fuerst or Ken Shepard)
• AD/Cryo (Jay Thielacker or Arkadiy Klebaner)
• TD/EF (Tom Nichol or Tom Page)
• Outsider (Tom Peterson?)

9
Safety Review Committee

• Before installation, must be reviewed by safety
  committee in charge of Meson Detector Building
• Bob Sanders is the chairman
• Also on the committee are Michael Geynisman, Joel
  Misek, and David Pushka

10
Engineering Notes

• 5031- Pressure Vessel Engineering Note
• Can be partially completed
• Will require vendors U stamp before it can be
  completed
• Only necessary for helium reservoir

11
Engineering Notes

• 5032- Cryogenic System Review
• Requires FEMA (Failure Mode and Effect Analysis)
• Also requires What-If analysis (human error,
  weather, etc.)
• I need to better understand cryostats connections
  (plumbing and electrical)
• Meeting with Arkadiy tommorrow

12
Engineering Notes

• 5033- Vacuum Vessel Engineering Note
• Can be filled out as soon as I determine proper
  method of sizing relief