TECHNA SHOW

1
TECHNA SHOW
THE BMS FOR THE HOTEL
2
CUBE CAPACITY

• Rooms Management
• -access control
• -electric energy
• -HVAC
• -fire prevention
• -bathroom help
• -courtains and rolling shutters
• -emergency (flood,electric energy
  failure,windows and doors state ..etc.)
• -cleaning state
• - Do not disturb
• -pay services (Video On Demand,Pay-TV
  ,Internet, water and electric energy)
• -personal messages (welcome,statement
  of account ,mail,..etc)
• Common Areas Management
• -access control
• -HVAC
• -lights and electric energy
• -electromechanical devices (remote
  control switch ,fluid pumps ,valves ,escape
  doors,ecc )
• -PLC systems interconnection

3

• Staff management
• -staff attendance
• -staff location in the rooms
• Confidential Management
• - Rooms Staff access log
• - calculating average time cleaning room
  global and individual                employee
  
• - control alarms (fire, rescue and
  emergency request            room) and times of
  intervention staff
• - chart-working periods of Fan Coil
• - graph of temperature room or common area
            (daily, monthly, seasonal)
• World Interconnection
• - local management and remote (via LAN,
  Intranet, Internet, phone)
• - interactivity with any software for hotel
  management

4
O.S.
CUBE does not use a specific OS. It can
operate on platforms Microsoft (Windows2000, XP,
Vista) or LINUX
5
NETWORK

• CUBE dialoguing with the hardware control,
  distributed in the structure, with one of two
  follows
• RS485
• - any BUS (max 128 BUS for a total of
  32768 rooms) can support up to 128           
  control stations (one for each common area and
  one every 4 rooms)         - dialogue with the
  control stations through MUX        
• - maximum speed 19200 bps
• LAN
• - NETWORK dedicated or shared         -
  minimum speed backbone LAN 100 Mbps (without
  Internet and PAY-TV) or 1000
• Mbps (with the Internet and PAY-TV).
          - minimum speed user LAN 100Mbps
          - configuration IP address of each
  station via software

6
RS485 BUS
7
LAN
8
GRAPHICS INTERFACE
The CUBE graphical user interface is essentially
composed of two parts Static interface
provides information on the general state of the
system allows access to various menu function
(creating maps, Check-In/out, silence alarms).
Dynamic interface provides real-time
information on the state rooms, allow the
carrying of commands on devices controlled and
displays the status of them, allows the
management of fire prevention. The dynamic
interface is itself consists of two modes of
representation of events.   FULL SYNOPTIC
9
STATIC Interface
Pull-down menu
Choosing the display and the event
Result commands sent and variation
state-controlled devices
Dynamic interface area
Networks state
Registration actions, signalling existence alarms
or warning, state data transmission
10
Pull-down menu
Guest data and Log file
Room commands
Guest Check-IN and Check-Out
Room services
Room key access code management
Key-codestaff management
Pay services
HVAC Rooms and Common Areas
Alarms display
HVAC single room and sigle Common Area
11
Timer tables for devices command
Common Areas access management
Fire alarms management
Display control
HVAC Common Areas management
Staff Data and staff movement in the rooms
12
Check-IN
CUBE manages the rooms access using codes stored
on RFID CARD (proximity card). The code is sent
to room at check-in and destroyed the next time
on Check-Out. A special procedure, under
Check-OUT allows the reuse of that CARD without
any additional steps.
- enable the room access - activation of air
conditioning to the stage    Room Assigned" -
enable access in public areas (garages, fitness,
etc.) - enable any pay services (bar, safe
etc.). - possibility of automatic Check-Out
inserting the   date and hour of departure
13
Check-OUT
- disables the Room and Common Areas access -
activation of air conditioning to phase "Room
Free" - manages the accounting of paid services
- manages the annotations charged to the Client
- makes it unusable for future CARD access code
if the customer does not return the card itself.
14
Remote-CHECK
It allows the programming of future CHECK-IN
CHECK-OUT and reservations for individual or
groups carrying out entry of all transactions
carried out from the menus Earlier CHECK-CHECK-IN
and OUT. Report any inconsistencies between
reservations and customers currently present.
15
ROOMS CLIMA SET UP
It managed the following levels of room
temperature Winter Season - Maximum room
temperature with Guest presence - Maximum room
temperature room with room assigned but
without Guest presence- Comfort temperature of
the first access Guest - Maximum temperature
Room not awarded Summer Season - Minimum
room temperature with Guest presence - Minimum
room temperature room with room assigned but
without Guest presence-Comfort-temperature of
the first access Guest - Minimum temperature
Room not awarded The Set-Up CONFORT temperature
can be used to cancel the settings made by Guest
at night. For example, if the Guest set for the
summer a minimum temperature of 17 C is
possible to cancel after 01.00 hours (or other
time), this approach by imposing a value of 20
C.
16
ROOMS CLIMA - chronothermostat
The settings SET-UP temperatures can be fixed
over the 24 hours or varied according to a scale
hourly. They may be subject to change hourly
even individual SET-UP.
17
COMMON AREAS CLIMA SET UP
Set the temperature value of maintenance at the
Common Areas depending on the season
18
FIRE ALARMS
Complete management fire detection system for
Rooms and Common Areas. The system of detection
and alarm activation is consistent with the
current legislation in force. I managed sensors,
fire doors, fire push-button and sirens. If
there is an alarm the operator has a time not
exceeding 2 minutes to open this FIRE window,
unlike the system to conduct the General Alarm
with closure of all fire doors el'attivazione of
sirens. Alternatively the intervention connects
STAND-BY system for a maximum of 10 minutes to
allow check the veracity of the alarm. The
operator in this case can decide how to behave.
The system can manage independently the sending
of pre-recorded messages in Common Areas to half
of our central Audio standards EN-60849
19
Events graphic display
Selecting the mode view of events FULL or
SYNOPTIC. Selection of event to see Rooms
Controlled devices Fire alarm
20
DYNAMIC Interface
The dynamic graphical interface allows for easy
iteration between the operator and the system
making it easily understandable actions to be
executed and views to interpret. The interface
can take two aspects FULL SYNOPTIC In
modalià FULL all items are represented in a
schematic and facimente understandable. In mode
SYNOPTIC all items are placed in their actual
realities on plans graphics to two or three
dimensions. The manner in three dimensions can be
used on machines PC with appropriate speed RAM
memory exceeding 1 Gb.
DYNAMIC GRAPHIC DISPLAY AREA
21
Full Mode-ROOM EVENTS
CLICK on the key FULL

• CLICK on the key
• You enter in this display. They can be
  represented concurrently up to 96 rooms for each
  window. A higher number of rooms will cause the
  automatic rotation based on multiples of 96.
  The display options are - Global Scroll
• Scroll for building - Scroll for building and
  floor 
• Single floor (next slide) At the top of the
  window, icons indicate specific events in
  progress.

22
Choosing the way of viewing rooms

The icons active at the top will access the list
of rooms that present the same type of alarm or
warning
Each ICON, representing the single room, the
report STATE complete it.
23
ROOM ICONS
ROOMS EVENTS LIST
Building and Room name
digita il numero camera per stato globale
Room Free
Rooms with Guest list
Room assigned
Bathroom help list
Room disabled
Flood Alarms list
Electric Energy Failure list
Guest in room
Door room opened list
Chambermaid in room
Technician in room
Room temperature Fan-Coil OFF Fan-Coil ON
Room to clean Do Not Disturb
Do Not Disturb list
Electric energy failure Generic Alarm
Fridge-Bar opened list
Calls maid list
Window opened list
Intrusion list
placement of a maidsand technicians in the rooms
(name and surname)
Rooms assigned list
24
FULL Mode DEVICES EVENTS
CLICK on the key you enter in this
display. They can be represented up to 121
events of the same type of device for each
window. At the top of the window, icons
indicate specific types of the various devices
controlled. The panel with the Icon displays
the type of device which detects only the state.
The panel with the Icon shows the types of
devices which determines and shows the status
25
Temperature
Electric Pumps
Fluid level
Electric engine
Request staff intervention
Generator
Bathroom help (Common Areas)
Electric Energy
DEVICES STATE ICONS
Electric valves
Equipment for lighting
Air handling units
emergency exit
Generic electric switches
Electric Pumps
Bathrooms Extractor fan
Electric engine
Generic extractor fan
Generator
Aromaterapia
Equipment for lighting
COMANDS ICONS
Electric valves
Electric energy
Air handling units
Genric electric switches
26
DEVICES STATE
CLICK ON TIPOLOGY KEY and will show all
devices with the same functions. The icons on
individual devices will take the following
views depending on whether the device is in
the state of "OFF" or "ON". If being set-up the
device must generate an alarm when changing their
status (from a OFF ON or vice versa) icon icon
type assume the color of fund RED and LED
begin to flash. With an icon on the
type CLICK you'll see these devices, depending
on the state or OFF ON, mode A CLICK on
the Status LED will give the system confirm your
display showing both the Icon type that the icon
event in a normal state (full gray) while the
Icon LED
27
COMMANDS AND DEVICES STATE
This view allows the direct command over every
single device. Each icon device is a key for
the ignition or turning off while an icon
representing a stylized image of the same device,
it will indicate the actual status on the ground.
28
The icons Operative may take different aspects
indicating the status of command and the device
namely

Command
to direct action.

Command ON and device ON


Command OFF and device OFF
Timing
Command                                   Under
Set-Up each Command can act as "Timer". With this
function the command                             
      activate themselves depending on a time
table.
Table
Timer enabled - Command ON and device ON
Table Timer
enabled Command OFF and device OFF.

Table Timer disabled -
Command OFF and device OFF
Example TIMER table with all the options
programming COMMAND
29
SYNOPTIC Mode ROOM EVENTS
CLICK SYNOPTIC
CLICK on key you enter into this display
and AFTER you have selected the building plan and
that means see At the top of the
window, icons indicate specific events in
progress.
 CHOICE OF BUILDING
CHOICE OF FLOOR
This mode allows the display of ALL the events,
both chambers that common areas, affecting the
plan selected to the exclusion of only fire
detection system
30
Example floor with only Common Areas
31
  In graphic representation was maintained a
similarity with the COLOUR SYMBOLOGY and icons
used in ways FULL for the ROOMS and for FULL
Operative Event
Room not assigned and room name (115) Room
assigned Room assigned and Do Not Disturb
enabled
Fire door opened Fire door closed Device
failure
Guest in room Maid in room Technician in room
Room temperature (20) Fan-Coil OFF Fan-Coil
ON Fan-Coil desabled
Command OFF and device OFF (example
Fan-Coil) Command ON and device ON Command ON
and device OFF (response on waiting) Command
failure
Window is close Window is open
Fire alarm active Room alarm (Bathroom help ,
Intrusion , Flood) Warning ( door opened ,
electric energy failure , fridge-bar opened)
32
SYNOPTIC Mode- DEVICES EVENTS
In this mode displays Homogeneous systems of
devices (thermal power stations, central
processing water or air). The synoptic panel is
made according to the needs of each individual
customer. The iterattività between panel and
operator is the same as that SYNOPTICA- ROOMS
33
Examples of Synoptic used by maintenance staff
with PC place in the local maintainers (PC
SLAVE). Synoptics iterattivi including through
use of screens TOUCH-SCREEN
34
ROOM DEVICES - general
Example of a standard room with highlighted all
controllable devices and sensors used.
Bed-head
Fire sensor
ROLLING SHUTTER
Bathroom help stay rod
WINDOW SENSOR
LOGIC ROOM BOARD
EXTRACTOR FAN
WATER VALVE
WATER VALVE
FRIDGE-BAR SENSOR
FLOOD SENSOR
DOOR SENSOR
EXTERNAL CARD READER
Media unit -Video On Demand -Pay-TV -Internet -Pe
rsonal messages
ELECTRIC LOCK
THERMOSTAT
INTERNAL CARD READER
35
Room Devices (details)

• RFID READER OUTSIDE ROOM
• -Bell push-button
• -LED 1 Guest in the room Cliente in camera
• -LED 2 generic alarm
• -LED 3 Do Not Disturb
• -LED 4 Fridge-Bar opened
• -LED 5 Card code identification
• Open the door if Card code is recognised as
  valid - Turn on courtesy light for 3 ' - bell
  is off with Do Not Disturb active
• No access for chambermaid when theGuest is in
  room- storage code that causes the opening of
  the door

 BED HEAD -LED and P.BUTTON Do Not
Disturb -P.BUTTON for door open -LED and P.BUTTON
Maid Call -LED messages -LED generic alarm
RFID READER INSIDE ROOM -LED and P.BUTTON Do
Not Disturb -LED and P.BUTTON Service for
Room cleaning -LED Messages -LED card code
identification   -Electricity and conditionning
activation for enabled Card Code -Turn On
courtesy light for 3 (Guest leave the
room) -signals the cleaning state at the
PC -signals the presence of chambermaid at the PC
THERMOSTAT -Guest temperature set ( / -) -Fan
Coil speed (OFF-1-2-3) -Fan stopping when the
window is open -display Room temperature -display
Guest set -display window state
36
Technologies for Building Automation Registered
Office via Tarabbo ,4 15070 Cassinelle
(AL) Head Office via Costalunga,1 - 15070
Cassinelle (AL) phone [phone] 143
842907 fax [phone] e-mail
info_at_techna.it web site httpwww.techna.it VAT
IT 02102020068