A New Area in ESDClothing

1
A New Area inESD-Clothing
nsp Sicherheitsprodukte GmbH HB Schutzbekleidung
GmbH Co.KG
2
Our Targets

• Long-lasting functionality
• high conductivity
• superb wearing comfort
• uncomplicated care
• highclass confection
• highest quality of the used materials

3
Demand Of Our Customers

• ESD-clothing should have low conductive, to
  secure the electronic devices which are getting
  more and more sensitive
• best efficiency without loosing superb wearing
  comfort and easy care

4
Realisation Of The Targets 1 Low
Conductivity

• Development of a new, patented yarn,
• highly conductive and washable,
• almost without any limit NAPTEX PM4
• Typical surface resestance of nsps ESD-smocks
• low conductivity even after more than 50
  washings
• (STFI washing test, test SP Institut Boras,
  Sweden)

5

• special manufacture for optimal efficiency
• highly conductive seams between arms and body
• (reg. trademark)
• body made out of one piece of cloth, without
  seperating seams
• Hidden push button

6
Our Naptex Yarn in Detail
coverage with Polyester-filaments
Centralized Bekinox steel fibers
7
Realization Of The Targets 2 High Wearing
Comfort

• lightweight ca 180g/qm
• Absorb sweat and transport it to the surface to
  evaporate
• superb air-permeability 167-180L/min/ qdm
• optimize shape

8
Realizations Of The Targets 3 Easy Care

• excellent lifetime by using the highest quality
  basic materials
• many washing cycles possible without negative
  results for the conductivity
• development of the textile together with the
  biggest textile leasing companies in Germany
  (BOCO, MEWA,)

9
Realization Of The Targets 4 Healthcare

• minimized risk of causing allergy by producing
  the textile basic, following the
• Ökotex Standard 100
• the Bekinox steel fibers are covered with cotton
  and polyester fibers, therefore the skin has no
  contact with the steel

10
Analysis Of Costs

• modern, highly conductive ESD-clothing minimizes
  immediatly and provable ESD-damages at your
  devices!
• the costs of the labcoats are soon amortized by
  less repairs and less defects

11
Analysis Of The Competitors I) Coats With
Stainless Steel Fibers

• 1) possibility of causing allergical reactions
  by steel fibers lying at the surface
• 2) steel fibers are washed out, can fall down on
  devices and cause short circuit!

12
Textile With Steelfibers
Bekinox-steelfiber ( ca 6cm)
polyester- or polyester/cotton
13
Analysis Of CompetitorsII) Coats with
Carbonfibers(not coated)

• 1) carbon is washed out soon
  
• (chemical reaction with the soap suds)
• 2) normally designed for cleanroom use,
• therefore bad wearing comfort
• 3) special washing procedures must be obeyed

14
Carbonfibers (uncoated)
Here the fiber itself is built by the carbon.
Therefore it is exposed directly to the soap
suds and is decomposed quite soon.
15
Analysis Of CompetitorsIII) Coats with
Carbonfibers(coated)

• 1) although coated not long lasting
• 2) sometimes based on 100 polyester
• 3) special care instructions have to be obeyed

16
Covered Carbonfibers
polyesterenvelope
carboninnerlayer
better washable than pure carbon, but
nevertheless caused by capillarity soap suds
reaches the carbon and destructs it.
17
Analysis Of Competitors IV) Cotton

• conductivity not high enough for highly sensitive
  modern electronic parts.
• cotton fibers fade out, shorter lifetime (1 year
  as calculated by textile leasers )
• cotton swells up by sweat, the air permeability
  decreases and causes heat accumulation
• difficult care ( ironing necessary)

18
Main Advantages of the ESD-SMOCKSBy NSP

• function always guaranteed, without any influence
  by climatic circumstances nor the age of the
  labcoat
• superb wearing comfort, therefore high acceptance
  by the wearing people
• low costs in leasing systems, comparable to
  cotton coats
• patented product.

19
Conclusion
For more certainty choose Naptex PM4