Start%20Up

1
Start Up
Double click on AFIT Custody Icon on desktop.
Connect power cable from Mains supply and switch
on at wall socket Connect USB cable from PC to
booth
You are now ready to use the Digital Image Booth
Switch on ALL 3 black switches. Check all 3 light
sources are illuminated. Switch on Camera. Lock
door
2
You should now see the DIB /AFIT Custody screen.
The Snap button is highlighted indicating the
system is ready to capture an image. Ask the
subject to enter the booth and seat themselves
on the stool.
3
Setting a Nationwide Standard

• Seat subject in booth
• Adjust stool so that eyebrows are level with the
  red
• guideline by way of the height adjustment ring
  under
• the seat cushion.
• Ensure subject has a straight back as a guide
  the
• right ear should be inline with the left hand
  upright.

in Digital Image Capture for Identification
Verification
4
Click the snap button ONCE to capture your image
when you are confident the subject is seated
correctly. (A quick visual inspection on screen
can be done by looking at the right hand side of
the image and the alignment of the eyes.)
5
Once the picture is taken the software analyzes
the image for compliance to the rigorous
standards set. If the image is FIND
compliant you will receive a green light on the
left hand side of the screen and a save button
will appear. Should you receive a red light only
the resume button will be visible and the
operator has no option but to re-take the
photo. We will go into red lights and faults
further on in this guide.
6
Click the Save button via your mouse/pointer
control
The image is then sized to FIND standards and
saved to the correct directory within NICHE RMS
and can be accessed immediately by the Custody
Suite Operative. Open the Subjects custody
file. Go to the image input screen. Click on the
camera icon. The FIND compliant image can then be
double clicked for insertion into the custody
file.
7
Once the image has been saved to the Custody
File, the booth can be used to take further
images. Repeat the image capture process as
previously. The new image taken will
automatically overwrite the image in the NICHE
directory - NOT the custody file image. This
failsafe action allows for only one image to be
available for a custody file at any one time and
avoids insertion of wrong images for the
corresponding subject. The following slides
will show examples of
verification, possible reasons and the answers
to achieve a green light result with every image.
RED LIGHT
8
Head Tilt Head tilt affects the compliancy of
the image. Minor tilting (taking into account
various postures encountered) can be adjusted
by the AFIT Custody Software without any user
intervention required to achieve a green light
result. Solution Click the resume button. Ask
the subject to straighten their head. This can
be seen during the live video relay before image
capture re-take image.
9
Head Forward or looking Down Also affects the
compliancy of the image. AFIT Custody Software
will be unable to get a measurement of the
subjects eyes. Solution Click the resume
button. Ask the subject to lift their head or
sit upright. This can be seen during the live
video relay before image capture. re-take
image.
10
Head backward or looking up Also affects the
compliancy of the image. AFIT Custody Software
will be unable to get a measurement of the
subjects eyes. Solution Click the resume
button. Ask the subject to straighten/lower
their head. This can be seen during the live
video relay before image capture re-take image.
11
Extras in DIB Suite
Additional features and there useage Height
Scale Range 24 to 84 (also cm reading) with
Digital display screen. Choice of inches or
cms Weighing Platform Calibrated and will
weigh up to 300Kilos. Reading sent to digital
display screen. Choice of Kgs or
lbs Smartwater recognition UV lighting Safe
low level UV (BLB) for use when trying to detect
smartwater security suspects.
12
Height Scale Range 24 to 84 (also cm
reading) with Digital display screen. Choice of
inches or cms
Height reading is displayed on the digital
read-out in units chosen by the operative.
Lower the head guide so it rests on the
subjects head.
Get subject to stand with their back to the
height measure and heels touching the lower
plate.
The height measure will auto power-down after 5
minutes. Press START button to re-start
application and await a positive reading before
taking measurement. If digital display shows
-------- , then move head platten until signal is
accepted and a reading is showing.
13
Weighing Platform Calibrated and will weigh up
to 300Kilos. Reading sent to digital display
screen. Choice of Kgs or lbs
Ensure screen is reading 0.0 before
weighing. Get subject to stand with their feet
fully on the platform
Take reading from digital display in unit
measure of choice.
For very large subjects (protuding stomachs) get
them to enter the booth facing backwards.
The weighing scales will auto power-down after 5
minutes. Press on/off button to re-start
application and await 0.0 reading before taking
measurement. The scales are calibrated before
installation. Do not allow subjects to JUMP on
scales.
14
Smartwater detection Lighting Safe UV lighting
fitted independent of other lightsources.
The UV Lights are controlled by the RED switch on
the outside of the booth. For more accurate
useage, switch off ALL 3 photo light sources
by way of the black buttons.
Seat or stand subject in DIB suite. If
smartwater residue is present the offender
and his/her clothing will show traces of the
coloured die.