M1

1

• M1

All-In-One Multimedia Amplifier
2
Audac Multimedia Amplifier

• Ergonomic and logical design

• Especially designed for use in Multiple Room
• situations

• 7 Stereo Inputs / 4 Stereo Output Zones

• 2 Stereo Power Amplifiers

• Conventional Analog control interface

• Wall mounting panel for each Zone (RS-485)

• RS-232 Control port

• Ethernet (webpage) Control

3
M1 Concept

• Ch 1-6 Mic/St. Line

• Ch 7 4 x St. Line

• Zone 1-4
• Balanced St. Line out

• Zone 1-2
• Stereo Amp 2x150W/ 4Ohm

• Digital Routing (Matrix)

• Digital Vol. Control

4
Front Input Channel 1-6

• 4 Zone Buttons for routing the signal

• 4 Routing Indication Leds

• Clipping Led

• Balance Control

• Volume Control

5
Rear Input Channel 1-6

• Dip-switch for Phantom and Mic/Line
• Selection

• Input Gain adjustment

• 3 band Tone Control (B,M,H)

• XLR Microphone Input

• Cinch Stereo Line Input

6
Front Input Channel 7-10

• 4 Zone Buttons for routing the signal

• 4 Source Buttons for input selection

• 8 Segment VU-Bar

• Balance Control

• Volume Control

7
Rear Input Channel 7-10

• Input Gain adjustment

• 2 band Tone Control (B,H)

• 4 x Cinch Stereo Line Input

8
Front Output Zone 1-4

• 8 Segment Stereo VU-Bars

• Bass/ Trebble Tone Control

• Master Volume Control / Each Zone

• Zone 1-2 Stereo Amp 2x150W/ 4Ohm

9
Rear Output Zone 1-4

• 4 x Stereo Balanced
• Line Output (XLR)

• 2 x Stereo Zones
• Powered Output
• (Z1, Z2)

• Power Amplifier
• 4 x 150W/ 4Ohm
• Bridged 2 x300W/ 8Ohm

10
Control Ports

• Remote Ethernet (webpage)
• (Control via webbrowser)

• RS-232 port (for Crestron, AMX,)

• 4 x RS-485 port for Wall Mounted
• Control Panel

• Priority switch (Ch1,2) for overriding

11
Principle of Use