Version 0909 - PowerPoint PPT Presentation

1 / 27
About This Presentation
Title:

Version 0909

Description:

2. Dwell Time: Increased exposure means a higher kill rate ... Protects plastics and rubber from dangerous UV exposure. ... the 'Real-Time' Kill-Rates per ... – PowerPoint PPT presentation

Number of Views:20
Avg rating:3.0/5.0
Slides: 28
Provided by: aaron106
Category:
Tags: version

less

Transcript and Presenter's Notes

Title: Version 0909


1
Version 09/09
2
(No Transcript)
3
  • Buildings are built tight
  • insulated to combat energy loss.
  • - As a result, biological chemical
  • concentrations continually rise
  • within the buildings envelope.
  • - A commercial building faces a
  • myriad of IAQ issues from poor air
  • quality being brought in from outside
  • to garbage room odors, biological
  • contaminants and VOC off-gassing
  • to name a few.
  • - A dirty coil loses efficiency making
  • the system work harder while
  • negatively impacting the buildings
  • IAQ.

4
(No Transcript)
5
The Sun purifies the Earths atmosphere by
bombarding it with Ultraviolet Light.
Ultraviolet-C (254 nanometers) Ultraviolet-V
(187 nanometers) light destroys the biological
chemical contaminants within our
atmosphere. Sanuvox High-Intensity UV Lamps
produce the same UV-C UV-V Light the Sun
produces bringing the same purification process
into the building.
6
UVC Germicidal Ultraviolet wavelength (254nm) is
effective in penetrating the cell membrane
breaking the DNA structure of a
micro-organism. This DNA sterilization inhibits
reproduction. Micro-organisms such as mold,
bacteria viruses will be destroyed with the
required concentrations of UVC germicidal energy.
7
UVV Oxidizing Ultraviolet Wavelength (187nm) is
effective as an oxidizing reactor. UVV produces
activated oxygen atoms that react to chemicals,
odors and VOCs degrading them by successive
oxidation into odorless inoffensive byproducts.
Effective at destroying chemical contaminants
such as cigarette smoke, formaldehyde, solvents,
diesel fumes, odors VOCs
8
(No Transcript)
9
(No Transcript)
10
Basic Concept Bring UV inside our
buildings 1- UV irradiation of INDOOR AIR
Destruction of Bio-contaminants (bacteria,
mold, etc) Elimination of their associated
odors 2- UV irradiation of surfaces
(objects) Sterilization of heating and cooling
coils
11
(No Transcript)
12
(No Transcript)
13
Although there are many types of UV Lamps Hot
Cathode, Cold Cathode, Regular Intensity, High
Intensity, Amalgam, Soft Glass, Quartz
Glass... All ultraviolet energy can BENEFIT from
a few helpful tools that can dramatically
increase the effectiveness of the UV energy
produced. 1. The ultraviolet source The more
powerful the Lamp the higher the kill rate 2.
Dwell Time Increased exposure means a higher
kill rate 3. Reflection Directing UV where
needed most will result in a higher kill rate
14
Oxidation is used to destroy chemicals and
odors. If there is residual ozone remaining
after the oxidation process, as it comes in
contact with UVC, the UVC will then catalyze the
residual ozone. In addition to catalyzing the
residual ozone, the UVC will also destroy the
biological contaminants in the air.
15
(No Transcript)
16
  • - Direct virtually 100 of the Lamps UV energy
    where needed most.
  • - Drastically increase Lamp life.
  • Allows the Lamp to be self-cleaning by directing
    UV back on itself
  • burning off the bio-aerosols that adhere to the
    Lamp surface.
  • - Protects plastics and rubber from dangerous UV
    exposure.
  • Supports Lamps that may be as long as 60
    protecting them from
  • breakage.

17
- Dramatically improves Indoor Air Quality -
Continuously treats the entire duct - Destroys up
to 99.9999 of bio-chemical contaminants -
Available in 40, 50 and 60 lengths - 5
High-Intensity Pure Fused 19mm. Quartz UVC
Lamps - Anodized Aluminum Parabolic Reflectors
maximizes UV energy - Digital Timer. LED
Audible Alarm on Ballast Control Panel -
Available with remote computer monitoring that
can be tied into the buildings automation. -
CSA C/US Certified and CE Approved
18
UV Bio-Wall Installed in a 24 x 24 Duct _at_ 1970
CFM (500 FPM)
19
To size the UV Bio-Wall, we simply need to know
the Duct Size CFM or FPM Percentage of fresh
air With that, we can provide free-of-charge
the Real-Time Kill-Rates per pass.
20
  • Destroys mold and other microbial growth on the
    Object as well as biological odors
  • - Improves energy savings reduces coil
    maintenance
  • - High-Intensity 19mm. UVC Quartz Lamp
  • - Patent pending Anodized Parabolic Reflector
    intensifies, directs and reflects UV Energy
    while protecting plastics from destructive UV
    Rays
  • - University tested published results in The
    Lancet Medical Journal
  • - Higher UV intensity reliability than other UV
    Lamp / Emitters
  • - Longer warranty than competing products
  • Longer operating life 17,000 hrs. compared to
    8,000 for the competition
  • Also available with a weather-proof NEMA 4X
    enclosure for Rooftop package Units

21
(No Transcript)
22
(No Transcript)
23
(No Transcript)
24
(No Transcript)
25
(No Transcript)
26
BLANK PAGE TO INSERT TEXT HERE XXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XX
27
(No Transcript)
Write a Comment
User Comments (0)
About PowerShow.com