Title: Tint Testa Tinted Glass Monitoring System
1Tint Testa Tinted Glass Monitoring System
2Why do you require a Tint Testa
- Government Regulation
- Vehicle Safety Inspections
- Road Traffic Accident Investigation
3What Type of Vehicle can be test with the Tint
Testa.
4What Element the Tint Testa Have
- The Plastic Case.
- Display.
- Light Sensor.
- Light Transmitter.
- Trigger Bouton.
- Two 9 Volt Batteries.
5What the Tint Testa Measures
- The Tint Testa measures the transmission of
light in the visible range which is suitable for
safe driving. -
6How you Use the Tint Testa
- Clean the area of the glass to be tested.
- Align the light Transmitted and the receiver
- through the car window.
- Press the trigger button.
- The tinting result will show in the display
- in percentage.
7How you Calibrate the Tint Testa
- In first instance check again the certified glass
sample - I additional calibration is required by the
special jig.
8What are the advantages In using the Tint Testa.
- Easy Use.
- Easy to Calibrate.
- Tamper Proof.
- Fast Response.
- Excellent Back -Up And Service.
- Very accurate.
- Low Cost.
9Other Tint Testa Benefits
- Any vehicle can be Tested
- Immune to ambient light.
- The unit has its own independent light source.
- Very light.
- Manufactured under ASO 9002.
- CE Approved.
- Tamper proof
- Additional printer could be connected to print
results
10Tint Testa general Specification.
- Measurement range 0 to 99 .
- Size 10cm x 19.5cm x 4.0cm.
- Weight only 0.8 Kg.
- Operating temperature 0 to 40 o Celsius.
- Storage Temperature 20 to 60 o Celsius.
- Two 9 Volt internal battery.
- Simple 3 step procedures to operate.
11Tint Testa Maintenance Requirements
- Replacement of Battery.
- Is recommended an Annual Recalibration.
12Tint Testa Training
- An operator manual is provided.
- Video cassette can be provided on request.
- No special training is necessary.
13Installation requirement of the Tint Testa
- No Installation is required.
- (Only positioning in the window).
14Where the Tint Testa is currently sold
- Australia.
- USA
- UK
- Brazil
- Thailand
- New Zealand.
- Chile
- Indonesia
15Design And Manufactured
- Circuitlink International
- 14/35 foundry Road
- Seven Hill
- NSW 2147
- Australia
- Ph 61 2 9624 1922
- Fax 61 2 9624 1911
- CIRCUITLINK_at_CIRCUITLINK.COM.AU
- WWW.CIRCUITLINK.COM.AU