Title: Agenda for LC Muon Detector Studies Mtg Black Hole Tues. Aug. 5 12:30
1Agenda for LC Muon Detector Studies Mtg Black
Hole Tues. Aug. 5 1230 1400
- Parts for the prototype planes. 15 min. Gene
Fisk - MAPMT FE electronics/cal. 15 min. Paul
Karchin -
10 min. Mani Tripathi - Readout Options
- MINOS 15 min. Adam Para
- UC Davis Studies 15 min. Mani
Tripathi - Muon ID in b-b_bar events 15 min. Caroline
Milstene
2Prototype Module Layout
5.0 m
2.5m
43 full strips
43 short strips
3.6m (L) x 4.1cm (W) x 1cm (T)
3.6m gt 0m long
Read out both ends of full strips one end of
short strips (except the shortest 22). 2(43
21) fibers/side 128 channels 8 (1.2mm dia)
fibers/pix 16(4 x 4mm2) pixels gt
Equivalent of One MAPMT/prototype plane
3How many prototype planes strips?
- Each plane is the equivalent of 86 strips that
are 3.6 m long. Each strip has a mass of 1.52 kg
or 3.3 lbs. - The weight of a plane (86 strips) is 131 kg or
288 lbs. Order 15 extra scintillator 100
strips per plane or 330 lbs (152kg). - 3 u 3 v to over-constrain a straight line 6
planes one spare to use for resolving multi-hit
ambiguities one to learn the construction
technique. gt 8 planes. - Total scintillator is 2,341 lbs (1.17T) or 700
strips or 1.064 Tonnes. - Scintillator Cost - MINOS paid 10/kg or
10K/tonne. Assume a 50 addl cost for a small
order -
-
16K
4Fiber quantities and costs
- WLS Fiber
- Buy enough to instrument every strip 100
strips3.6m/strip 360 m times 8 planes (one to
learn on). - gt 2.88km
- Kuraray quote of 3.29m gt 9,475 plus shipping
duty - so add 1,500, which brings the total to
11K WLS - Clear Fiber
- From engineering drawing
- Short near strips 214.6 m 97m
- Full strips 43(4.6m 2.3m) 297m
- Short far strips 214.3m 90m
- Total
484m gt 550m times 8 planes -
4,400 m - Clear cost 4.4km3.11K/km 13.7K 1.5K
15.2K Clear
5Other fiber and layout costs (Mitch Wayne-
Notre Dame)
- Polishing and splicing
- Material costs teflon tubes
3.0K - Ice polishing splicing 32 hrs48/hr
1.5K - Plastic sheets for fiber routes
- 10/sqft acrylic or 6/sqft Lexan
- (6-10/sqft)110sqft/sheet8 sheets 5.3-9.0K
- Machining of plastic sheets
- 20 hrs of programming40/hr 0.8K
- 60 hrs Gerber routing40/hr 2.4K
- Total machining of plastic sheets
3.2K
6Multi-anode Photomultipliers
16 channel multi-anode PM
16 anode PMs come in two varieties w/ or w/o
base. H8711-10 with base 1290.85 ea.
for 6 or more. R7600-00-M16 w/o base 1011.37
ea. for 6 or more. We will need at least 14
MAPMTs for RD 8 for the 7 planes 2 to
replace two loaner tubes (spares) 4 for bench
tests of electronics Procure 7 w/bases 7 w/o
bases. Cost 9,036 7,080 16,116
30mm
Hamamatsu H6568
7Incomplete RD Cost Estimate