Installer Certification 20.5.14 NMAC - PowerPoint PPT Presentation

1 / 10
About This Presentation
Title:

Installer Certification 20.5.14 NMAC

Description:

... certified installer requirements for performing UST system installations or ... Certified installers shall not perform any installation, modification, repair or ... – PowerPoint PPT presentation

Number of Views:25
Avg rating:3.0/5.0
Slides: 11
Provided by: NMED1
Category:

less

Transcript and Presenter's Notes

Title: Installer Certification 20.5.14 NMAC


1
Installer Certification20.5.14 NMAC
  • The effective date for certified installer
    requirements for performing UST system
    installations or repairs in New Mexico was
    September 16, 1989.
  • The effective date for certified installers to
    perform AST system installations or repairs in
    New Mexico will be August 15, 2004 which is one
    year from the effective date of the revised
    regulations.
  • .

2
Installer Certification
  • A certified installer is certified by the
    department to install and repair AST and UST
    systems.
  • Exercises supervisory control of the certified
    work
  • Is physically present on-site at the critical
    junctures in the installation, modification or
    repair
  • - A repair activity involving
    disconnecting or affecting the integrity of the
    piping, tank or overfill systems,or work on a
    line or tank leak detection system, then the
    repair is not normal maintenance and requires a
    certified tank installer unless excepted in
    Sections 1401 and 1402.
  • .

3
Installer Certification
  • Exceptions to repair requirement for a certified
    installer
  • Internal lining of a tank
  • Installation or repair of cathodic protection
    systems
  • Other installation or repair approved in advance
    in writing by the department as an exception
  • An applicant taking the on-site examination,
    Section 1406
  • Normal maintenance
  • Work on line or tank leak detection systems by
    technicians approved by the department in advance
    if the technicians are trained by the
    manufacturer.
  • .

4
AST and UST Installer Certification
  • Requirements for both AST and UST installers
  • One level of certification
  • Application fee of 50
  • 1 year of work experience within the preceding 3
    years in installation or repair for which the
    application is being made
  • Pass a written examination administered by an
    approved certification educator, International
    Code Council (ICC). Separate exams for AST and
    UST certifications
  • Pass separate on-site examinations for AST and
    UST installer certification.

5
UST and AST Installer Certification
  • ICC has separate exams for UST and AST installer
    certification
  • National examinations for UST and AST Installers
    are designed to determine installers knowledge
    of industry standards and codes
  • National examination fee is 75
  • Installers can take the examination in
    Albuquerque, NM and El Paso, TX on demand
  • ICC certification program is currently recognized
    in Arizona, Alaska, Nevada, Oregon, Washington,
    Illinois, Indiana and New Hampshire
  • Certified installer certification would also
    include an examination that covers UST and AST
    regulations (separate exams)
  • New Mexico examination fee will be an additional
    45.

6
UST and AST Installer Certification
  • Allow an applicant to request an on-site
    examination within 180 days of submission of the
    application and another 180 days extension
    (Section 1406)
  • If the applicant does not pass the exam with in
    the 180 day 180 day extension, the applicant
    will need to file a new application
  • Eliminated the 15 hours of continuing education
    requirement in Section 1408 for renewal
    application.

7
Renewal of Certification
  • Same requirements for both AST and UST
    Certification (Section 1408)
  • 50 Renewal fee.
  • Demonstrate completion of 2 system
    installations, modification or repair during
    a 4 year period.
  • OR
  • Pass an ICC or alternative test.

8
Installers Duties and ObligationsSection 1409
  • A certified individual shall exercise supervisory
    control over any installation or repair
    undertaken and must be physically present at all
    critical junctures
  • A certified installer shall have knowledge of
    materials, technical requirements and
    installation or repair procedures for any storage
    tank system the installer undertakes to install
    or repair
  • A certified installer shall not certify to an
    owner or operator of a storage tank system that
    an installation or repair is complete unless the
    installation or repair complies with the storage
    tank regulations and the Hazardous Waste Act

9
Installers Duties and ObligationsSection 1409
  • Certified installers have a duty to report to the
    department any and all releases
  • Certified installers shall not perform any
    installation, modification, repair or removal
    without providing notice.

10
Enforcement Department ActionsSection 1410
  • Regulations provide for the revoking of an
    installer certification for the appropriate
    reasons
  • Proposed regulations shall serve the applicant
    or certificate holder a written notice of
    contemplated action as required by the Uniform
    Licensing Act, when the department contemplates
    denying an application or revoking a certificate
  • The certificate holder may not apply for a
    minimum of 2 years for certification for the type
    of installer certification revoked.
Write a Comment
User Comments (0)
About PowerShow.com