CB200e Cabinet Extinguishant Control Panels

1
CB200e Cabinet Extinguishant Control Panels

• Designed for cabinet extinguishant systems
• 2 zone extinguishant co-incidence operation
• Selectable discharge circuit delay (0-10-20-30
  seconds)
• Alarm circuit and C/O fire relay included
• Actuator and Solenoid compatible
• One man test facility

2
CB200 Conventional Control Panels

• Earth fault monitoring
• Surface or semi-flush mounting as standard 
• Ample termination space 
• Flame Resistant Polycarbonate enclosure 
• Complies with EMC and LVD Directives

3
Cabinet Specifications
Semi-flush is available as standard because of
the construction of the CB200 enclosure.
The removable gland plate and cable entry
grommets obviate the need to drill wiring holes
in the panel on site.
Panel dimensions are detailed in the Application
Guide.
4
Mechanical Assembly
This drawing shows the ample wiring space
incorporated into the CB200 panel design.
Installers logo or brand image may be added.
PCB terminal support for mechanical reliability.
Electronics are completely removable for
convenience on site during fitting of the back
box.
There is space for two 12V 2.1AH batteries -
suitable for the 24hr standby requirements on an
8 zone system.
5
Typical Wiring Schematic
This is a typical CB200e wiring illustration as
it appears in the product documentation.
Apollo S60 detectors are illustrated, but the
CB200e panel supports a wide variety of other
manufacturers detectors - details in the
Application Guide.