Title: TMT'AOS'PRE'09'027'REL01
1Adaptive Optics Systems for the Thirty Meter
Telescope
- Brent Ellerbroek
- Thirty Meter Telescope Observatory Corporation
- Adaptive Optics for Extremely Large Telescopes
- Paris, June 23, 2009
2Presentation Outline
- AO requirements flowdown
- Top-level science-based requirements for AO at
TMT - Derived requirements and design choices
- First light AO architecture summary
- Subsystem designs
- Narrow Field Infra-Red AO System (NFIRAOS)
- Laser Guide Star Facility (LGSF)
- System performance analysis
- Component requirements and prototype results
- Lab and field tests
- Upgrade paths
- Summary
3Top-Level Requirements at First Light
- Derived to enable diffraction-limited imaging and
spectroscopy at near IR wavelengths
4Implied AO Architectural Decisions
Diffraction-Limited Image Quality
Very High Order AO (60x60)
10-30 Corrected FoV
Tomography (6 GS) MCAO (2 DMs)
High Sky Coverage
(Sodium) Laser Guide Stars
Near IR (JH) Tip/Tilt NGS
MCAO to Sharpen NGS
Large Guide Field (2)
Multiple (3) NGS to Correct Tilt Aniso.
High Throughput
Minimal Surface Count AR coatings
Low Emission
Cooled Optical Path (-30 C)
5Technology and Design Choices (I)
- Utilize existing or near-term approaches whenever
possible - Solid state, CW, sum-frequency (or frequency
doubled) lasers for bright sodium laser
guidestars - Located in telescope azimuth structure with a
fixed gravity vector - Impact of guidestar elongation is managed by
- Laser launch from behind secondary mirror
- Polar coordinate CCD with pixel layout matched
to elongation - Noise-optimal pixel processing, updated in real
time - Mirror-based beam transport from lasers to launch
telescope is current baseline
6Technology and Design Choices (II)
- Piezostack DMs for high-order wavefront
correction - Hard piezo for large stroke, low hysteresis at
low temperature - 5 mm inter-actuator pitch implies a large AO
system - Surface count minimized to improve throughput and
emissivity - Tip/tilt correction using a tip/tilt stage, not
separate mirror - Field de-rotation at instrument-AO interface (no
K-mirror) - Tomographic wavefront reconstruction implemented
using efficient algorithms and FPGA/DSP
processors - Tip/tilt/focus NGS WFSs located in science
instruments - Baseline detector is the H2RG array
7AO Architecture Realization
- Narrow Field IR AO System (NFIRAOS)
- Mounted on Nasmyth Platform
- Ports for 3 instruments
- Laser Guide Star Facility (LGSF)
- Lasers located within TMT azimuth structure
- Laser launch telescope mounted behind M2
- All-sky and bore-sighted cameras for aircraft
safety (not shown) - AO Executive Software (not shown)
8NFIRAOS on Nasmyth Platform with Client
Instruments
Future (third) Instrument
NFIRAOS Optics Enclosure
Instrument Support Structure
LGS WFS Optics
Nasmyth Platform Interface
Nasmyth Platform
Electronics Enclosure
Laser Path
IRIS (and on-instrument WFS)
IRMS (and on-instrument WFS)
9NFIRAOS Science Optical Path
- 1-1 OAP optical relay
- DMs located in collimated path
Light From TMT
WFS Beam-splitter
DM0/TTS
10NFIRAOS Opto-mechanical Layout
2 Truth NGS WFSs 1 60x60 NGS WFS
IR Acquisition camera
Input from telescope
OAP1
OAP2
76x76 DM at h11.2km
63x63 DM at h0km On tip/tilt platform (0.3m
clear apeture)
Output to science instruments and IR T/T/F WFSs
6 60x60 LGS WFSs
AO and science calibration units not illustrated
11Laser Guide Star FacilityConservative Design
Approach
- Approach based upon existing LGS facilities (i.e.
Gemini North and South) - Laser system
- Initially 6 25W solid state, CW laser devices
with one spare - Space for future upgrades to additional or more
advanced lasers - Beam transfer optics
- Azimuth structure path
- Deployable path to transfer beams to elevation
structure along telescope elevation axis - Elevation structure path, including pupil relay
optics and pointing/centering mirrors for
misalignment compensation - Top-end beam quality, power, and alignment
sensors - Optics for asterism generation, de-rotation, and
fast tip/tilt correction - Laser launch telescope
- 0.5m unobscured aperture and environmental window
12Approach to Performance Analysis
- Key requirement is 187 nm RMS wavefront error
on-axis - 50 sky coverage at Galactic pole
- At zenith with median observing conditions
- Delivered wavefront with all error sources
included - Performance estimates are based upon detailed
time-domain AO simulations - Physical optics WFS modeling with LGS elongation
- Telescope aberrations and AO component effects
included - Actual RTC algorithms for pixel processing and
tomography - Split tomography enables simulation of 100s of
NGS asterisms - Simulated disturbances are based upon TMT site
measurements, sodium LIDAR data, telescope
modeling
13Examples of AO Simulation Data and Intermediate
Results
Input Disturbance
Atmospheric phase screen
TMT aperture function
M1 phase map
M1M2M3 on-axis phase map
Sodium layer profile
AO System Responses
LGS sub-aperture image
Polar coordinate CCD pixel intensities
Residual error phase map
DM phase maps
14Example NGS Guide Field from Monte Carlo Sky
Coverage Simulation
Tip/Tilt NGS
Tip/Tilt/Focus NGS
Tip/Tilt NGS
Sample Asterism near 50 Sky Coverage (Besançon
Model, Galactic Pole)
15Performance Estimate Summary
- 178 nm RMS error in LGS modes
- 127 nm first order, 97 nm AO components, 79 nm
opto-mechanical - 47.4 nm tip/tilt at 50 sky coverage
- 63.4 nm overall error in NGS modes
- 187 nm RMS total at 45 sky coverage
- NGS Algorithm optimization and detector
characterization still underway
16Sky Coverage Results for Enclosed Energy on a 4
mas Detector
17Key AO Component Technologies
18Laser Systems
- 50W power successfully demonstrated by a
prototype NdYAG, sum frequency, CW laser - Development of a facility class 25W design now
underway at ESO, with AURA/Keck/GMT/TMT support
for prototyping - Sodium layer coupling of 260 photonsm2/s/W/atom
demonstrated, but issues remain - Magnetic field orientation, photon recoil,
inaccessible ground states - coupling of 70 photons-m2/s/W/atom predicted at
ELT sites - Possible solutions include combined D2a/D2b
pumping and multiple (3-5) laser lines - Performance penalty is 40 nm RMS without laser
improvements
19Wavefront Correctors Prototyping Results
Prototype Tip/Tilt Stage
Simulated DM Wiring included in bandwidth
demonstration
Subscale DM with 9x9 actuators and 5 mm spacing
20 Hz Reqt
-3dB TTS bandwidth of 107 Hz at -35C
Low hysteresis of only 5-6 from -40 to 20 C
20Polar Coordinate CCD Array Concept for
Wavefront Sensing with Elongated Laser Guidestars
Fewer illuminated pixels reduces pixel read rates
and readout noise
sodium layer ?H 10km
D 30m ? Elongation ? 3-4
H100km
LLT
TMT
AODP Design
21Laser Guide Star (LGS) WFS Detector Requirements
Now waiting to fabricate and test the 1-quadrant
prototype design developed under AO Development
Program (AODP) funding
22Real Time Controller (RTC) Requirements and
Design Approach
- Perform pixel processing for LGS and NGS WFS at
800 Hz - Solve a 35k x 7k wavefront control problem at
800Hz - End-to-end latency of 1000?s (strong goal of 400
ms) - Update algorithms in real time as conditions
change - Store data needed for PSF reconstruction in
post-processing - Using conventional approaches, memory and
processing requirements would be gt100 times
greater than for an 8m class MCAO system - Two conceptual design studies by tOSC and DRAO
provide effective solutions through
computationally efficient algorithms and
innovative hardware implementations
23Lab Tests and Field Measurements
- University of Victoria Wavefront Sensor Test
Bench - Tests of matched filter wavefront sensing with
real time updates as sodium layer evolves - University of British Columbia sodium layer LIDAR
system - 5W laser, 6m receiver
- 5m spatial resolution at 50 Hz
24Options for First Decade AO Upgrades and Systems
- MEMS-based MOAO in future NFIRAOS instruments
- Increased sky coverage via improved NGS
sharpening - Multiple MOAO-fed IFUs on a 2 arc minute FoV
- Order 120x120 wavefront correctors for 130 nm
RMS WFE (with upgraded lasers, wavefront sensors,
and RTC) - MEMS correct NFIRAOS residuals simplified
stroke/linearity requirements - Additional AO systems for first decade
instrumentation - Mid-IR AO (Order 30x30 DM, 3 LGS)
- MOAO (Order 64x64 MEMS, 5 field, 8 LGS)
- ExAO (Order 128x128 MEMS, amplitude/phase
correction for M1 segments, advanced IR WFS,
post-coronagraph calibration WFS) - GLAO (Adaptive secondary to control 500
wavefront modes, 4-5 LGS) - Adaptive secondary mirror could be useful for all
systems - Only corrector needed for GLAO and Mid-IR AO
- Large-stroke woofer for MOAO, ExAO, and
NFIRAOS
25Summary
- TMT will be designed from the start to exploit AO
- Facility AO is a major science requirement for
the observatory - An overall AO architecture and subsystem
requirements have been derived from the AO
science requirements - Builds on demonstrated concepts and technologies,
with low risk and acceptable cost - AO subsystem designs have been developed
- Designs and performance estimates are anchored by
detailed analysis and simulation - Component prototyping and lab/field tests are
underway - Construction phase schedule leads to AO first
light in 2018 - Upgrade paths are defined for improved
performance and new AO capabilities during the
first decade of TMT
26Additional Posters and Talks
27Acknowledgements
- The authors gratefully acknowledge the support of
the TMT partner institutions - They are
- the Association of Canadian Universities for
Research in Astronomy (ACURA) - the California Institute of Technology
- and the University of California
- This work was supported as well by
- the Gordon and Betty Moore Foundation
- the Canada Foundation for Innovation
- the Ontario Ministry of Research and Innovation
- the National Research Council of Canada
- the Natural Sciences and Engineering Research
Council of Canada - the British Columbia Knowledge Development Fund
- the Association of Universities for Research in
Astronomy (AURA) - and the U.S. National Science Foundation.