Fibers Analysis - PowerPoint PPT Presentation

1 / 28
About This Presentation
Title:

Fibers Analysis

Description:

Be able to understand importance of Fiber Transfer ... Examples: wool, mohair, cashmere, furs, and cotton. Man-made fibers are manufactured. ... – PowerPoint PPT presentation

Number of Views:681
Avg rating:3.0/5.0
Slides: 29
Provided by: asCla
Category:
Tags: analysis | fibers

less

Transcript and Presenter's Notes

Title: Fibers Analysis


1
Fibers Analysis
  • Kelly, Jeff, Hieu
  • Dr. Hornbuckle
  • Clayton State University

2
OBJECTIVES
  • Be able to identify the types of fibers
  • Be able to define fibers
  • Be able to understand importance of Fiber
    Transfer
  • Be able to differentiate between types of Fiber
    Transfer
  • Be able to understand the evidential value of
    fibers.
  • Be able to define the methods of examination.
  • Be able to understand the Microscopy Technique
  • Be able to understand the TLC Technique
  • Be able to understand the Pyrolysis Gas
    Chromatography Technique
  • Be able to recall how fiber evidence was useful
    in the case of Kristen Lea Harrison

3
DEFINITION OF FIBER
  • A fiber is the smallest unit of a textile
    material.
  • Fibers can occur naturally as plant and animal
    fibers, but they can also be man-made.
  • A fiber can be spun with other fibers to form a
    yarn that can be woven or knitted to form a
    fabric.
  • Fibers are usually collected from clothing,
    carpeting, furniture, beds, and blankets.

4
Types of Fibers
  • Natural fibers are derived in whole from animal
    or plant sources.
  • - Examples wool, mohair, cashmere, furs, and
    cotton.
  • Man-made fibers are manufactured.
  • - Regenerated fibers are manufactured from
    natural raw materials and include rayon, acetate,
    and triacetate
  • - Synthetic fibers are produced solely from
    synthetic chemicals and include nylons,
    polyesters, and acrylics.
  • Polymers, or macromolecules, are synthetic fibers
    composed of a large number of atoms arranged in
    repeating units known as monomers.

5
Types of Fibers
Many different natural fibers originating from
plants and animals are used in the production of
fabric.
6
Types of Fibers
  • Man-made fibers can be defined as a fiber of a
    particular chemical composition that has been
    manufactured into a particular shape and size,
    contains a certain amount of various additives,
    and has been processed in a particular way

7
FIBER TRANSFER
  • The type and length of fiber, the type of
    spinning method, and the type of fabric
    construction all affect the transfer of fibers
    and the significance of fiber associations.
  • This becomes very important when there is a
    possibility of fiber transfer between a suspect
    and a victim during the commission of a crime.
  • The discovery of cross transfers and multiple
    fiber transfers between the suspect's clothing
    and the victim's clothing dramatically increases
    the probability that these two individuals had
    physical contact.

8
FIBER TRANSFER
  • When fibers are transferred from the fabric of an
    individual's clothing to the clothing of another
    individual, it is called a primary transfer.
  • As these same fibers are transferred to other
    objects during subsequent contacts, secondary
    transfers are occurring.

9
Fiber Evidence
  • The quality of the fiber evidence depends on the
    ability of the analysts to identify the origin of
    the fiber or at least be able to narrow the
    possibilities to a limited number of sources.
  • Obviously, if the examiner is presented with
    fabrics that can be exactly fitted together at
    their torn edges, it is a virtual certainty that
    the fabrics were of common source.
  • Matching dyed synthetic fibers or dyed natural
    fibers on the clothing of a victim to fibers on a
    suspects clothing can be very helpful to an
    investigation, whereas the matching of common
    fibers such as white cotton or blue denim cotton
    would be less helpful.

10
Fiber Evidence
  • Microscopic comparisons between questioned and
    standard or reference fibers are initially
    undertaken for color and diameter
    characteristics, using a comparison microscope.
  • Other morphological features that could be
    important in comparing fibers are
  • - Lengthwise striations on the surface of the
    fiber
  • - The presence of delustering particles that
    reduce shine
  • - The cross-sectional shape of the fiber
  • Compositional differences may exist in the dyes
    that were applied to the fibers during the
    manufacturing process.

11
Methods For Fiber Comparison
  • The visible light microspectrophotometer is a
    convenient way for analysts to compare the colors
    of fibers through spectral patterns.
  • A more detailed analysis of the fibers dye
    composition can be obtained through a
    chromatography separation.
  • Infrared spectrophotometry is a rapid and
    reliable method for identifying the generic class
    of fibers, as does the polarizing microscope.
  • Depending on the class of fiber, each polarized
    plane of light will have a characteristic index
    of refraction.

12
Microscopy
  • Microscopic examination provides the quickest,
    most accurate, and least destructive means of
    determining the microscopic characteristics and
    polymer type of textile fibers.
  • Microscopic View

Acetate
Dacron
13
Stereomicroscope
  • Should be used first to examine fibers.
  • Physical features such as crimp, length, color,
    relative diameter, luster, apparent cross
    section, damage, and adhering debris should be
    noted.
  • Fibers are then tentatively classified into broad
    groups such as synthetic, natural, or inorganic.

14
Comparison Microscope
  • If all of the characteristics are the same under
    the stereoscope, then the comparison microscope
    is used.
  • A point-by-point and side-by-side comparison
    provides the most discriminating method of
    determining if two or more fibers are consistent
    with originating from the same source.
  • Comparisons should be made
  • under the same illumination
  • conditions at the same magnifications.
  • This requires color balancing
  • the light sources.
  • A balanced neutral background
  • color is optimal.
  • Side-by-side Comparison
  • Bright Field Adjustment

15
Polarized Light Microscope
  • Perhaps the most versatile of all microscopes
    allows the analyst to actually see and manipulate
    the sample of interest.
  • Refractive indices, birefringence, and dispersion
    can all be quantitatively determined.

16
Microspectrophotometry
  • Using a grating spectrometer, light absorbed by
    or reflected from a sample is separated into its
    component wavelengths, and intensity at each
    wavelength plotted.
  • Microscope linked to a
  • Spectrophotometer
  • - IR Absorption spectrum
  • - UV/VIS Absorption Spectrum

17
Microspectrophotometry
  • IR spectography identifies generic subtypes
    indistinguishable by microscopic exam .
  • Use of IR microscopes coupled with Fourier
    transform infrared (FTIR) spectrometers has
    greatly simplified the IR analysis of single
    fibers.
  • Advantages
  • Nondestructive
  • Not limited to sample size
  • Disadvantages
  • Reactive dyes
  • Chemical composition
  • Tentative identification

18
Scanning Electron Microscopy
  • SEM with energy dispersive spectroscopy(EDS) is
    used as an imaging and microanalytical tool in
    characterization of fibers.
  • Surface morphology can be examined with great
    depth of field at continually variable
    magnifications.

19
Thin-Layer Chromatography
  • An inexpensive, simple, well-documented technique
    that can be used (under certain conditions) to
    complement the use of visible spectroscopy in
    comparisons of fiber colorants.
  • Dye components are separated by their
    differential migration caused by a mobile phase
    flowing through a porous, adsorptive medium.
  • Should be considered for single-fiber comparisons
    only when it is not possible to discriminate
    between the fibers of interest using other
    techniques, such as comparison microscopy and
    microspectrophotometry in the visible range

20
Thin-Layer Chromatography
  • Technique
  • Extraction of dyes
  • Solid stationary phase
  • Liquid moving phase
  • Capillary action
  • Chromatogram
  • Interpretation
  • Rf (retention factor)
  • Color
  • Proportions
  • Scanning densitometer
  • Fluorescence
  • Analysis of Chromatograms
  • Positive association
  • Exclusion
  • Inconclusive

21
Pyrolysis Gas Chromatography
  • Pyrolysis is a destructive analytical method.
  • When the heat energy applied to the polymer
    chains is greater than the energy of specific
    bonds in that polymer chain, these bonds will
    fragment.
  • In PGC, the fragments generated by pyrolysis are
    introduced into a gas chromatograph for
    separation and characterization
  • PGC can be used to ID the generic type of an
    unknown fiber, and in some cases it can ID
    subclasses within a generic class

22
Analysis of Fibrous Materials
  • The analyst should perform a combination of
    methods that extract the greatest potential for
    discrimination between samples.
  • A minimum of 2 of the analytical techniques must
    be performed for each category.

23
Case Study
  • In 1982, Kristen Lea Harrison was abducted and
    found dead six days later in Ohio.
  • She had been raped and strangled.
  • They founded a orange pieces of fiber in her hair
    that was similar to a murder case 8 month
    earlier.
  • By analyzing the fiber under a microscope the
    forensic scientists determine that it was carpet
    fibers based on the oddly shaped (trilobal) fiber.

24
Case Study-Continued
  • Sometime later there were another women that was
    kidnapped by Robert Anthony Buell, however she
    escape and reported him to the police.
  • The police notice that the Mr. Buell has a van
    that contain a distinct orange carpet that
    matched the fiber in Kristen hair.

25
Case Study-Continued
  • In order to determine the structure of the fiber,
    the scientist must analyze the fiber under a
    microscope.
  • The forensic scientist determined that the fiber
    have a trilobal shape and this is commonly found
    as carpet fiber.
  • The next step is to determine the composition of
    the dye from both sources.
  • Even though the colors of the fiber and the
    carpet are the same by observation, the scientist
    must run test to determine the chemical
    composition of the two dye are the same.

26
Case Study-Continued
  • In order to test the chemical composition of the
    dye, the forensic scientist may use TLC.
  • When a scientist use thin layer chromatography
    (TLC) they can obtain a Rf, if these value are
    the same, then the chemical composition are the
    same.
  • Once this fact is established, the scientist can
    contact the manufacturer to obtain more facts on
    these dyes.

27
Case Study-Continued
  • Apparently only 74 yards of it had been shipped
    to that area of Ohio.
  • Other evidence established a more solid link and
    Robert Anthony Buell was eventually convicted.

28
REFERENCES
  • Ramsland, Katherine. "Fiber Analysis." Crime
    Library. 13 Mar 2008lthttp//www.crimelibrary.com/c
    riminal_mind/forensics/trace/1.htmlgt.
  • "Masthead of Forensic Science Communications."
    Forensic Fiber Examination Guidelines. April 1999
    Volume 1 Number 1. Federal Bureau of
    Investigation. 13 Mar 2008lthttp//www.fbi.gov/hq/l
    ab/fsc/backissu/april1999/houcktoc.htgt.
  • Lewin, Menachem, and Pearce. Handbook of Fiber
    Chemistry. New York Marcel Dekker.
  • "The Thin Blue Line." Forensic Scientists, Hair
    and Fibers. 13 Mar 2008 lthttp//www.policensw.com/
    info/forensic/forensic7a.htmlgt.
  • Carpet and Rug Fiber Chemistry. Bane-Clene
    Corporation 2007. 13 Mar 2008 lthttp//www.baneclen
    e.com/articles/fiber-chemistry.htmlgt.
Write a Comment
User Comments (0)
About PowerShow.com