Packing

1

• Packing
• Magnum Board Products are Packed Safely and
  Securely to Tight Specifications Ensuring You
  Receive
• A Quality Product, On Time, Every Time.

2

• Storage Handling
• Even though Magnum Board is Virtually Impervious
  to Water, Mold and Mildew and is very durable,
  for best results
• Keep material dry prior to and during
  installation
• Store flat on dunnage
• Do not stack other materials on top of the Magnum
  Board
• Protect the material from jobsite dirt
• Protect edges from damage

3

• Magnum Board is being subjected to the most
  stringent tests required by the ICC / UL and
  Building Codes today to ensure it withstands all
  challenges of mother nature.

4

• Magnum Board has been tested to
• ASTM - E84 Surface Burning
• Characteristics of Building materials
• Flame Spread Index (FSI) 0
  Class A (Scale 0 450)
• Smoke Developed Index (SDI) 20 Class
  A (Scale 0 450)
• Testing conducted by Southwest Research Institute
  
• San Antonio, Tx.
• Copies of the test results may be obtained by
  calling
• the home office of Magnum Building Products.

5

• Magnum Board has been tested to
• ASTM E136 Combustible Characteristics
• Magnum Board is a non combustible building
  material.
• Testing was conducted by Southwest Research
  Institute - San Antonio, Tx.
• Copies of the test results may be obtained by
  calling the
• home office of Magnum Building Products.

6

• Magnum Board Has Been Tested To
• New York City U-Pitt Toxicity Test
• Magnum Board Products were found to be a non
  toxic building material.
• Testing was conducted by Southwest
• Research Institute San Antonio, Tx.
• Copies of the test results may be obtained by
  calling
• the home office of Magnum Building Products.

7

• Testing Scheduled in 2007
• ASTM E119 Fire Resistive Construction
• Testing will be conducted by Southwest Research
  Institute San Antonio, Tx.
• Copies of the test results may be obtained by
  calling the home office of Magnum Building
  Products.

8

• The Following Testing Is Scheduled
• To Complete Mid Year April 2007
• ASTM C1185
• Flexural strength
• Water immersion (wet conditioning for flexural
  strength test)
• Dimensions and tolerances
• Linear variation with change in moisture content
• Water absorption density
• Moisture content
• Freeze thaw cladding products
• Warm water
• ASTM E330
• Structural performance, positive and negative
• ASTM G155 Cycle 1
• Xenon arc, accelerated weathering

9

• The Following Testing Is Scheduled
• To Complete Mid Year 2007 Continued
• ASTM E72 C90
• Racking shear
• ANSI A118.1, A118.4 and A136.1
• Shear bond strength
• ASTM D2394, Section 7
• Compression indentation (concentrated load)
• ASTM C473
• Facial Dimensions, Squareness Thickness
• ASTM D1037
• Fastener holding (saturated) sections 41 60
• Linear variation or moisture movement section
  108

10

• The Following Testing Is Scheduled
• To Complete Mid Year 2007 Continued
• ASTM C947
• Flexural strength (saturated)
• ASTM G22
• Bacteria resistance
• ASTM G21 (NOTE May add ASTM C3273 or
  supersede ASTM G21)
• Fungus resistance
• ASTM C666, Procedure B, ANSI 118.9
• Freeze thaw cycling (required as backer board)
• Miami-Dade Impact Testing
• Magnum Board System