WARNING LIGHTS FOR BRAKE SYSTEMS PowerPoint PPT Presentation

presentation player overlay
1 / 12
About This Presentation
Transcript and Presenter's Notes

Title: WARNING LIGHTS FOR BRAKE SYSTEMS


1
WARNING LIGHTSFOR BRAKE SYSTEMS
2
ABS Warning Light (Amber)
  • 2 second prove-out
  • ABS system defect
  • System below 9 volts
  • Main Relay failure
  • Module comes disconneted
  • Continually during diagnostic mode if hard fault
    is present

3
BRAKE WARNING LIGHT
  • Will come on in following conditions
  • Prove out (crank position)
  • Parking brake applied
  • ABS warning light has failed and ABS fault is
    present
  • If failure in base brake system
  • If low fluid level
  • Sometimes in diagnostic mode

199C
4
WARNING LIGHTOPERATION
5
BRAKE LIGHT OPERATION
6
RELAY OPERATION
7
(No Transcript)
8
GM ALDL CONNECTOR
9
  • FORD SELF-TEST CONNECTOR
  • ABS USUALLY RED
  • SOMETIMES LOCATED UNDER HOOD OR IN TRUNK

10
(No Transcript)
11
(No Transcript)
12
THATS ALL FOLKS!!!
Write a Comment
User Comments (0)
About PowerShow.com